• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 추계학술대회논문집
• /
• pp.41-47
• /
• 2006

In this study, the influences of environmentally friendly visual and auditory information on traffic noise perception were surveyed by the using electroencephalogram Green rural region image and CBD image in urban city were used as visual informations. And traffic noise, signal and environmental music were used to detect the impact on electroencephalogram variance. It was revealed that green rural region image caused a-wave ratio increase about 10% and environmental music increased $\alpha$-wave ratio approximately $40{\sim}50%$. The results of this study improved that environmentally friendly visual and auditory information had an effect on decreasing traffic noise loudness to some extents.

• 한국소음진동공학회논문집
• /
• 제17권2호
• /
• pp.160-167
• /
• 2007

In this study, the influences of environmentally friendly visual and auditory information on traffic noise perception were surveyed by the using electroencephalogram. Green rural region image and CBD (central business district) image in urban city were used as visual informations. And traffic noise, signal and environmental music were used to detect the impact on electroencephalogram variance. It was revealed that green rural region image caused ${\alpha}-wave$ ratio increase about 10% and environmental music increased ${\alpha}-wave$ ratio approximately $40{\sim}50%$. The results of this study improved that environmentally friendly visual and auditory information had an effect on decreasing traffic noise loudness to some extents.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 추계학술대회논문집
• /
• pp.53-56
• /
• 2004

A light rail transit would be one of effective means to solve a traffic problem of the city. Noise and vibration originated from light railway, however, would be another problem. This study focuses on the method of decreasing noise and vibration for a light railway, and comprises track condition, driving condition, linear condition, vehicle condition and civil engineering structure condition. For decreasing noise and vibration in an track, long rail laying and low vibration track laying would be good methods. The result of this study proves that improving the track wold be the most economical and valid method for decreasing noise and vibration for light railway.

• 한국음향학회:학술대회논문집
• /
• 한국음향학회 1994년도 FIFTH WESTERN PACIFIC REGIONAL ACOUSTICS CONFERENCE SEOUL KOREA
• /
• pp.656-661
• /
• 1994

The impacts of road traffic noise in Hong Kong are pervasive. About one million peoople are affected by road traffic noise at levels higher than a standardd recommended fro planning of new developments. The Environmental Protection Department of Hong Kong has promulgated a set of planning standards and guidelines for reference of planners, engineers and architects in their preparation of land use proposals which include road and residential developments. This paper will describe, in connection with road traffic noise in Hong Kong, the planning objectives, the various practicable mitigation measures available to a high density modern city, and the achievements through conscientious planning efforts made over the past years.

• Environmental Sciences Bulletin of The Korean Environmental Sciences Society
• /
• 제4권1호
• /
• pp.1-9
• /
• 2000

This paper describes an analysis of various factors affecting traffic noise propagation, including the distance from the road, existence of a direct path of noise propagation, density and height of buildings, and procedure for predicting the attenuation of noise levels from roads. The analysis is based on a multiple number of regression models, utilizing the quantification theory of the first kind. This study incorporates a large amount of survey data concerning traffic noise propagation. The survey of the traffic noise propagation around main roads was carried out in several residential areas, mainly in Kwangju. The attenuation of noise levels measured provided 691 usable data samples. A multiple regression analysis demonstrated that the distance from the road makes the most significant contribution to the attenuation of the noise level. The second contributor was found to be the existence of a direct path of noise propagation. The building density and average height of the buildings also affected the attenuation of the noise level considerably. Other factors, such as the height of the building behind the receiver microphone and the number of traffic lanes on the noise-source roads, did not contribute as much to the attenuation of the noise level as the factors mentioned avove.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.163-168
• /
• 2007

A light railway operationis an effective means to solve a traffic problem of the city however, noise and vibration is pollution happened. This paper studied noise and vibration pollution of a light railway operation in order to let a decrease. The study range was only track condition and civil engineering structure condition. The way how we decrease noise and vibration in a protection vibration track, ballasted track, non-ballasted track, floating track trends was devoted is long rail laying, low vibration track lying. It was the most economic that the examination results track section a complement, and it was proved that a certain way.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1993년도 추계학술대회
• /
• pp.151-155
• /
• 1993

Evoked potentials(EP) measured with scalp electrodes are often described as a deterministic process corrupted by uncorrelated electrical activities occuring in the brain and These electrical activities(ongoing EEG) refer to noise in EP recording. The Conventional method to determine the EP waveform requires long recording time. Unfortunately most of algorithm developed are too complicated for implementation in real time. Thus, conner EP recording devices use Ensemble average for real time processing. In this paper introduce EP recording hardware for processing advanced algorithm in real tlne. This hardware is composed of DSP chip(TMS320c25) and microcomputer.

• 대한전자공학회논문지SP
• /
• 제42권3호
• /
• pp.129-136
• /
• 2005

잡음이 중첩된 음성으로부터 잡음을 제거하기 위해서는, 잡음의 크기에 따라서 음성처리 시스템의 매개변수를 변경하는 것이 양호한 음질의 음성을 재생하는데 바람직하다. 본 논문은 백색잡음 및 자동차의 주행잡음에 의해 저하된 3단계의 음성을 학습할 수 있는 3층 구조의 신경회로망을 사용하여, 음성 중의 잡음량의 크기를 추정하는 방식을 제안한다. 실험결과, 제안한 방법은 신경회로망에 의해서 잡음량이 추정될 수 있는 것을 알 수 있었으며, 화자와 음성 데이터가 학습데이터와 다르더라도 백색잡음에 대해서 평균 $95\%$ 이상의 높은 잡음 추정율을 구할 수 있었다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.302-309
• /
• 2009

Nowadays, the construction sites are growing in city every year, so complaints for construction noise have increased more and more. To analyze this noise scientifically, construction noise prediction program was developed in 1998 and 2005 but it is too difficult to apply program in field because there is few soundproof facilities and it can't understand the coordinate system and so on. The aim of this study is to develop noise prediction program to apply in construction sites. For this, the problems of existing program was analyzed and survey was performed to get requestion of field overseer and upgraded program. To get reliability of program, it was compared with sound measurement value in field. As a result, construction sound prediction program have various soundproof facilities data than existing program. It can also analyze multi receiver point at the same time for several construction machinery. Most of all, it is more powerful to set receiver or source in the axis of X, Y, Z. so program user can make use of it easily. An average of difference is -0.9$\sim$1.8dB.

• 한국소음진동공학회논문집
• /
• 제19권4호
• /
• pp.409-417
• /
• 2009

Nowadays, the construction sites are growing in city every year, so complaints for construction noise have increased more and more. To analyze this noise scientifically, construction noise prediction program was developed in 1998 and 2005 but it is too difficult to apply program in field because there is few soundproof facilities and it can't understand the coordinate system and so on. The aim of this study is to develop noise prediction program to apply in construction sites. For this, the problems of existing program was analyzed and survey was performed to get requestion of field overseer and upgraded program. To get reliability of program, it was compared with sound measurement value in field. As a result, construction sound prediction program have various soundproof facilities data than existing program. It can also analyze multi receiver point at the same time for several construction machinery. Most of all, it is more powerful to set receiver or source in the axis of X, Y, Z. so program user can make use of it easily. An average of difference is -0.9~1.8 dB.