• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.515-517
• /
• 1998

인터넷 급속도로 사용자, 트래픽, 호스트, 네트워크 등이 증가하고 있다. 이러한 증가에 따라 인터넷의 효과적인 관리를 위해서는 기본적인 인터넷 사용 트래픽의 측정 및 분석이 필요하다. 최근의 OC3mon, NetFlow System등의 트래픽 측정도구들은 고속의 인터넷 백본에서 유통되는 트랙픽들의 특성을 파악할 수 있도록 한다. 특히, 고속 인터넷 플로우 스위칭이 이용하는 IP패킷들의 연속적인 흐름인 플로운(flow)를 바탕으로 인터넷 트래픽 특성을 파악 할 수 있도록 한다. 본 논문에서는 플로우 기반의 인터넷 트래픽 측정도구 Cisco 라우터의 NetFlow 인터페이스와 Cflowd 수집기를 사용하여 국내 교육 인터넷 망의 트래픽을 측정하여 분석한 국내 인터넷 트래픽 특성 결과를 제시한다.

• Proceedings of the Korea Contents Association Conference
• /
• 2009.05a
• /
• pp.8-11
• /
• 2009

NAC(Network Access Control) technology is intended for authentication of internal networks access through various paths. In this paper, we build computer network platform using NAC and Extreme switch and confirm authentication for the platform. The platform consists of PIX, NAC and authentication server.

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.1
• /
• pp.27-34
• /
• 2015

The correlation between crack propagation and localized recrystallization are compared in a series of cross section analyses on thermal cycled edgebond and underfilm material applied wafer level chip scale package (WLCSP) components with a baseline of no-material applied WLCSP components. The results show that the crack propagation distribution and recrystallization region correlation can explain potential degradation mechanisms and support the damage accumulation history in a more efficient way. Edgebond material applied components show a shift of damage accumulation to a more localized region, thus potentially accelerated the degradation during thermal cycling. Underfilm material applied components triggered more solder joints for a more wider distribution of damage accumulation resulting in a slightly improved thermal cycling performance compared to no-material applied components. Using an analysis on localized distribution of recrystallized areas inside the solder joint showed potential value as a new analytical approach.

• Journal of Welding and Joining
• /
• v.32 no.3
• /
• pp.53-59
• /
• 2014

The mechanical stability of solder joints in electronic devices with Sn-Ag-Cu is a continuous issue since the material was applied to the industry. Various shock test methods were developed and standardized tests are used in the industry worldwide. Although it is applied for several years, the detailed mechanism of the shock induced failure mechanism is still under investigation. In this study, the effect of external temperature was observed on large Flip-chip BGA components. The weight and size of the large package produced a high strain region near the corner of the component and thus show full fracture at around 200G level shock input. The shock performance at elevated temperature, at $100^{\circ}C$ showed degradation based on board pad designs. The failure mode and potential failure mechanisms are discussed.

• Information Systems Review
• /
• v.3 no.2
• /
• pp.245-260
• /
• 2001

While past knowledge management researches have focused on conceptualization and strategic implications, knowledge asset researches attempt to provide practical guidelines for companies. However, each research classifies knowledge asset from its own perspective, and thus it is not a trivial task to leverage consistent and inclusive criteria in managing corporate knowledge asset. The objective of this paper is to develop a knowledge asset classification schema on the basis of the three business functions: customer relationship management, product innovation, and infrastructure management. To demonstrate the feasibility of our schema, it has been applied to 9 Korean corporations. Knowledge assets are evaluated according to core capabilities, which are main drivers of sustainable competitive advantages. The results of case study show that the leveraged classification schema reflects current knowledge asset management and characteristics of corporations. Our finding is that most top-quality knowledge management corporations are likely to develop well-balanced knowledge asset.

• Journal of Communications and Networks
• /
• v.9 no.4
• /
• pp.377-382
• /
• 2007

This paper presents a new enhanced dynamic and multilayer protection(DMP) routing scheme that considers cooperation between packet and wavelength switching domain in order to minimize the resource consumption. The paper describes the architecture of the multilayer network scenario and compares the proposed algorithm with other routing mechanisms applying protection at the IP/multi-protocol label switching(MPLS) layer or at the optical layer. Simulation results show that DMP reduces the number of optical-electrical-optical(o-e-o) operations and makes an efficient use of the network resources compared to non-multilayer proposals.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.631-637
• /
• 2006

In this paper we study the optimization issues of ring networks employing novel parallel multi-granularity hierarchical optical add-drop multiplexers (OADMs). In particular, we attempt to minimize the number of control elements for the off-line case. We present an integer linear programming formulation to obtain the lower bound in optimization, and propose an efficient heuristic algorithm called global bandwidth resource assignment that is suitable for the design of large-scale OADM networks.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.11b
• /
• pp.1499-1502
• /
• 2002

DiffServ 망에서 완전한 QoS를 망 사용자에게 제공하기 위해서는 downstream 트래픽 뿐만 아니라, upstream 트래픽에 marking, policing 을 적용해 주어야 한다. 본 논문에서는 downstream 트래픽에만 QoS를 적용하는 단방향 트래픽 제어기법과, downstream및 upstream 트래픽에 QoS를 적용하는 양방향 QoS 서비스 기법을 비교하기 위하여, cisco 라우터를 이용하여 QoS 테스트베드를 구성하고, 성능을 측정 및 분석하였다.

• Advances in materials Research
• /
• v.1 no.1
• /
• pp.37-49
• /
• 2012

In this paper, we present modeling and characterization of CNT-based TSVs to be used in high-frequency RF applications. We have developed an integrated model of CNT-based TSVs by incorporating the quantum confinement effects of CNTs with the kinetic inductance phenomenon at high frequencies. Substrate parasitics have been appropriately modeled as a monolithic microwave capacitor with the resonant line technique using a two-polynomial equation. Different parametric variations in the model have been outlined as case studies. Furthermore, electrical performance and signal integrity analysis on different cases have been used to determine the optimized configuration for CNT-based TSVs for high frequency RF applications.

• The Journal of Information Systems
• /
• v.23 no.2
• /
• pp.25-47
• /
• 2014

Based on the levels of inter-organizational information flow and the degrees of suppliers' power, this study aims to develop a framework useful for classifying four types of the buyer's e-commerce strategies in manufacturing firms: e-marketplace, e-partnership, e-procurement and supplier's e-marketplace (e-distribution). We adopted a multi-methodological approach by mixing both qualitative and quantitative methods. After developing a framework, through the cases of Cisco, JAL, Toyota Motor, KIST, AMP, and 3M, this paper aims to confirm the actual existence of the four forms of e-commerce. The results from the cases supported the four types of e-commerce strategies in manufacturing firms. With the empirical data, we also demonstrated the configuration of the framework and the four types of e-commerce strategies, and identified the characteristics (i.e., size, age, actual adoption rate of the each type of e-commerce, and supply-chain performance) of the organizations employing each strategy.