• 대한치과보철학회지
• /
• 제26권1호
• /
• pp.153-169
• /
• 1988

There is a little scientific documentation reporting the stress, distribution to the edentulous mandible by different concepts of occlusal scheme. So, this study was to investigate the hypothesis that the magnitude and distribution of the occlusal stresses, transmitted through a mandibular complete denture base to the edentulous mandible, would be influenced by the lingualized occlusion. This investigation was performed to analyze the stresses induced in a three-dimensional photoelastic edentulous mandible, when a load is applied to the denture arranged into lingualized occlusion in centric relation, lateral and protrusive functional position. The mounted denture on a Dentatus Type ARO articulator was loaded in a pure vertical direction with 15kgs on the center of articulator in each case and the stresses were frozen into epoxy edentulous model at $127^{\circ}C$ in the stress freezing furnace. The stress-frozen epoxy models were sliced with diamond disc saw into 4mm thick. The slices were examined with a circular polariscope. The results were as follows: 1. In centric relation, the stresses were low at anteriors, and gradually increase to the premolar, molar area and highest at the first molar and gradually decrease from the second molar and lowest at the retromolar pad region. The lingual side showed higher stresses than labiobuccal side. 2. In lateral functional position, the working side showed higher stresses than the balancing side. In working side, the lingual side showed higher stresses than the buccal side and in balancing side, the buccal side showed higher stresses than the lingual side. 3. In protrusive position, stress distribution was symmetrical on the posteriors and the stresses were concentrated at the labial side of the anteriors.

• BMB Reports
• /
• 제40권2호
• /
• pp.163-171
• /
• 2007

Functional elements of the conserved helix 7 in the poreforming domain of the Bacillus thuringiensis Cry $\delta$- endotoxins have not yet been clearly identified. Here, we initially performed alanine substitutions of four highly conserved aromatic residues, $Trp^{243}$, $Phe^{246}$, $Tyr^{249}$ and $Phe^{264}$, in helix 7 of the Cry4Ba mosquito-larvicidal protein. All mutant toxins were overexpressed in Escherichia coli as 130-kDa protoxins at levels comparable to the wild-type. Bioassays against Stegomyia aegypti mosquito larvae revealed that only W243A, Y249A or F264A mutant toxins displayed a dramatic decrease in toxicity. Further mutagenic analysis showed that replacements with an aromatic residue particularly at $Tyr^{249}$ and $Phe^{264}$ still retained the high-level toxin activity. In addition, a nearly complete loss in larvicidal activity was found for Y249L/F264L or F264A/ Y249A double mutants, confirming the involvement in toxicity of both aromatic residues which face towards the same direction. Furthermore, the Y249L/F264L mutant was found to be structurally stable upon toxin solubilisation and trypsin digestion, albeit a small change in the circular dichroism spectrum. Altogether, the present study provides for the first time an insight into the highly conserved aromaticity of $Tyr^{249}$ and $Phe^{264}$ within helix 7 playing an important role in larvicidal activity of the Cry4Ba toxin.

• 한국자동차공학회논문집
• /
• 제22권1호
• /
• pp.117-125
• /
• 2014

The temperature distribution of steady state rolling tires with detailed tread blocks is numerically predicted using the three dimensional full patterned tire model. A three dimensional periodic patterned tire model is constructed by copying 1-sector mesh in the circumferential direction. Using the static tire contact analysis, the strain cycles during one revolution are approximated with the strains at Guassian points of the elements which are sector-wise repeated within the same circular ring of elements, by neglecting the tire rolling effect. Based upon the multi-axial fatigue theory, the maximum principal strain is used to represent the combined effect of six strain components on the hysteretic loss. In the following, the deformation due to the inflation and vertical load is calculated using ABAQUS. Then heat generation rate in each element is calculated using an in-house code. Lastly, temperature distribution is calculated using ABAQUS again. Through the numerical experiments, the validity of the proposed prediction method is examined by comparing with the experiment and the temperature distribution of a patterned tire model is compared with those of the main-grooved simple tire model.

• Journal of Computing Science and Engineering
• /
• 제5권3호
• /
• pp.210-222
• /
• 2011

In this work, we study the problem of privacy-preservation data publishing in moving objects databases. In particular, the trajectory of a mobile user in a plane is no longer a polyline in a two-dimensional space, instead it is a two-dimensional surface of fixed width $2A_{min}$, where $A_{min}$ defines the semi-diameter of the minimum spatial circular extent that must replace the real location of the mobile user on the XY-plane, in the anonymized (kNN) request. The desired anonymity is not achieved and the entire system becomes vulnerable to attackers, since a malicious attacker can observe that during the time, many of the neighbors' ids change, except for a small number of users. Thus, we reinforce the privacy model by clustering the mobile users according to their motion patterns in (u, ${\theta}$) plane, where u and ${\theta}$ define the velocity measure and the motion direction (angle) respectively. In this case, the anonymized (kNN) request looks up neighbors, who belong to the same cluster with the mobile requester in (u, ${\theta}$) space: Thus, we know that the trajectory of the k-anonymous mobile user is within this surface, but we do not know exactly where. We transform the surface's boundary poly-lines to dual points and we focus on the information distortion introduced by this space translation. We develop a set of efficient spatiotemporal access methods and we experimentally measure the impact of information distortion by comparing the performance results of the same spatiotemporal range queries executed on the original database and on the anonymized one.

• 한국음향학회지
• /
• 제22권7호
• /
• pp.545-553
• /
• 2003

압전 변환기를 사용하는 초음파유량계에서 고온의 유체로부터 압전 변환기를 보호하기 위하여 도파관을 사용하면서 종진동 초음파 전파성능을 향상시키기 위한 연구를 하였다. 도파관을 따라 전달되는 열을 효율적으로 차단하는 도파관 재질을 선정하였고, 압전 변환기를 보호할 수 있는 도파관의 최소 길이를 파악하였다. 균일한 원형 봉의 종진동 가진 응답을 구하여 진폭을 최대로 하는 도파관 길이를 선정하였다. 원추형 테이퍼 봉의 가진 응답을 구하여 도파관의 단면 크기가 길이방향으로 작은 쪽에서 파동이 증폭됨을 확인하였다. 균일한 도파관에서 단면 반지름이 작을수록 펄스 파 분산이 줄어듬을 파악하고, 단일 봉 도파관을 사용한 실험으로 이를 입증하였다. 실용적 도파관으로서 철심 조합형 도파관을 제시하고 제작과 평가를 통하여 파동 전파의 우수성을 확인하였다.

• 건축역사연구
• /
• 제22권6호
• /
• pp.7-22
• /
• 2013

The purpose of this paper is to study on the spatial characteristics from the "The Holy Trinity" fresco painted by Masaccio in the early Renaissance paintings. The results of this study are as follows. 1. The elevation composition of the "The Holy Trinity" fresco is divided into the upper and lower structure through horizontal axis on horizontal line around vanishing point. The upper structure is composed of vertical axis formed through the disposition of the "Trinity" elements and horizontal axis on horizontal line. The lower structure is composed of the sarcophagus and skeleton in such inside and the altar supported through circular columns of left and right. 2. The section composition of the "The Holy Trinity" fresco is composed of the ceiling structure of cylindrical-shaped vault on upper part around basic square floor plan that is interior space and upper structure. The exterior space and lower structure is placed with sarcophagus in inner part that altar and step is projected as same height and width in the outside direction. 3. The basic floor composition of the "The Holy Trinity" fresco is planned by square shape around structural columns that is placed at corners as symmetry through transverse, longitudinal and diagonal axis. The whole floor composition planned through the altar and step that is in exterior space at front, the apse of round form at rear part and the structure of the middle story concept at interior. 4. The visual aspect of the "The Holy Trinity" fresco is composed of the stable balance in relation with distance and height because the interior and exterior space as well as the upper structure and lower structure is formed by regular proportion system. The elevation angle of visual range was planned to view in detail generally or partially the architectural composition system and element, characters through proper visual distance, center and position.

• 한국지열·수열에너지학회논문집
• /
• 제1권1호
• /
• pp.1-8
• /
• 2005

Aquifer Thermal Energy Storage (ATES) can be a cost-effective and renewable geothermal energy source, depending on site-specific and thermohydraulic conditions. To design an effective ATES system having the effect of groundwater movement, understanding of thermohydraulic processes is necessary. The heat transfer phenomena for an aquifer heat storage are simulated by using FEFLOW with the scenario of heat pump operation with pumping and waste water reinjection in a two layered confined aquifer model. Temperature distribution of the aquifer model is generated, and hydraulic heads and temperature variations are monitored at the both wells during 365 days. The average groundwater velocities are determined with two hydraulic gradient sets according to boundary conditions, and the effect of groundwater flow are shown at the generated thermal distributions of three different depth slices. The generated temperature contour lines at the hydraulic gradient of 0.001 are shaped circular, and the center is moved less than 5 m to the direction of groundwater flow in 365 days simulation period. However at the hydraulic gradient of 0.01, the contour center of the temperature are moved to the end of east boundary at each slice and the largest movement is at bottom slice. By the analysis of thermal interference data between two wells the efficiency of the heat pump system model is validated, and the variation of heads is monitored at injection, pumping and no operation mode.

• 한국음향학회지
• /
• 제37권4호
• /
• pp.181-187
• /
• 2018

본 논문은 원형 단면 임피던스 튜브내에 고정된 미세천공 탄성판의 흡음을 해석적으로 구하는 방법을 다루었다. 판의 진동과 덕트 내부 음장을 모드 함수의 무한 급수의 합으로 전개하였는데 반경방향으로는 Bessel 함수를 포함한다. 평면파 가정하에서 저주파수 대역의 근사식을 판의 처음 몇 개의 모드만 고려하여 흡음율을 유도하였으며 등가 임피던스를 갖는 단일 표면의 형태로 제시하였다. 본 논문에서 제안한 공식과 FEM(Finite Element Method)을 이용한 결과는 잘 일치 하였는데 탄성의 효과는 판의 고유진동수에 해당하는 골 또는 피크의 형태로 나타난다. 천공율이 매우 작으면 진동의 영향이 지배적이나 천공율이 어느 한계이상 되면 박판의 탄성거동은 매우 작게 나타나고 강체 MPP(Micro-Perforated Plate)의 흡음 특성이 지배적이 된다.

• 전자공학회논문지A
• /
• 제31A권7호
• /
• pp.85-94
• /
• 1994

A high-resolution transmission electron microscopy study of the solid phase crystallization of the amorphous silicon thin films, deposited on SiOS12T at 52$0^{\circ}C$ by low pressure chemical vapor deposition and annealed at 55$0^{\circ}C$ in a dry N$_{2}$ ambient was carried out so that the arrangement of atoms in the crystalline silicon and at the amorphous/crystalline interface of the growing grains could be understood on an atomic level. Results show that circular crystalline silicon nuclei have formed and then the grains grow to an elliptical or dendritic shape. In the interior of all the grains many twins whose{111} coherent boundaries are parallel to the long axes of the grains are observed. From this result, it is concluded that the twins enhance the preferential grain growth in the <112> direction along {111} twin planes. In addition to the twins. many defect such as intrinsic stacking faults, extrinsic stacking faults, and Shockley partial dislocations, which can be formed by the errors in the stacking sequence or by the dissociation of the perfect dislocation are found in the silicon grain. But neither frank partial dislocations which can be formed by the condensation of excess silicon atoms or vacancies and can form stacking fault nor perfect dislocations which can be formed by the plastic deformation are observed. So it is concluded that most defects in the silicon grain are formed by the errors in the stacking sequence during the crystallization process of the amorphous silicon thin films.

• Elastomers and Composites
• /
• 제48권4호
• /
• pp.300-305
• /
• 2013

사출성형에서 성형수축은 피할 수 없는 현상이다. 따라서 성형수축을 줄이기 위한 연구가 필요할 뿐만 아니라 성형수축의 특성을 명확히 파악하는 것이 필요하다. 본 연구에서는 유리섬유로 보강된 폴리카보네이트를 이용하여 2.5차원형상인 환상형상의 시편에서 보이는 성형수축 현상을 조사하였다. 환상시편은 외경의 크기와 두께를 달리하여 설계하였다. 성형조건은 수지온도, 보압시간 및 보압크기를 변수로 설정하였다. 여러 성형조건으로 성형된 시편에서 내경과 외경의 크기가 변하는 양상에 대해서 분석하였다. 성형된 시편의 외경과 내경의 치수는 금형의 치수보다 작게 나타났다. 시편의 외경이 클수록, 그리고 시편의 두께가 두꺼울수록 수출율은 작게 나타났다. 또한 게이트의 위치에 따라 수축의 크기가 방향성을 보였다. 따라서 성형된 시편은 원형이 아니라 타원형으로 나타났고 게이트 방향으로 내경과 외경이 가장 큰 수축을 보였다. 수축된 제품의 형상조절을 위해서는 게이트 설계와 같은 금형설계가 중요하다고 판단된다.