• 한국항해항만학회지
• /
• 제40권6호
• /
• pp.361-368
• /
• 2016

부유체의 횡동요는 승조원의 피로를 누적시키고, 심지어 구조물 전체를 전복시키기 까지 하고, 또 선체에 반복적인 외력을 가하는 등 부유체의 안정성과 구조물의 안전에 심대한 영향을 끼친다. 그래서 거의 모든 선박의 경우에는 빌지킬을 설치하여 횡동요를 감소시키고 있고, 특수한 경우에는 안티롤링 탱크나 핀 스태빌라이저나 자이로스코프 등을 설치하여 횡동요를 줄이고 있다. 그러나 안티롤링 탱크는 설치하는데 용적을 많이 차지하고, 핀 스태빌라이저나 자이로스코프는 설치비와 유지 관리비가 많이 든다. 본 연구에서는 안티롤링 진자를 이용하여 부유체의 횡동요를 줄이고자 한다. 보통 단진자라고 하면 질량체를 끈으로 어디엔가 고정시켜 놓고 자유롭게 흔들리는 구조를 말한다. 여기에서는 통상의 진자 대신에 진자를 원궤도에 올려놓아서 단진동 운동을 하도록 하는 원리를 이용한다. 제안한 장치를 실험선에 적용하여 그 효능을 입증하였다. 안티롤링 탱크의 약 1/8의 중량과 약 1/6의 용적을 가진 안티롤링 진자를 이용하여 이것보다 더 좋은 효과를 낼 수 있음을 확인하였다. 여기에 더하여 선체에 안티롤링 진자를 부가한 모델의 선형운동방정식과 비선형 운동방정식을 제시하였다.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권5호
• /
• pp.720-726
• /
• 2006

In an attempt to develop an artificial diet for growing olive flounder (Paralichthys olivaceus), weight gain, feed utilization and nutrient retention were investigated in fish fed moist (MP), semi-moist (SMP) and extruded pellets (EP). Excretion of nitrogen and phosphorus was also estimated based on their whole body gain and intake. EP and MP composed of raw fish and SMP made of formulated powder feed with water were prepared to have the same energy contents on a dry matter basis. A total of 240 fish with an average initial weight of 120 g were randomly distributed to each (20 fish/tank) of 12 circular plastic tanks (4 tanks/treatment) and fed experimental diets for 8 weeks. Fish groups fed EP (209 g) or SMP (209 g) recorded higher final weight than those fed MP (176 g), while dry feed consumption was highest in SMP groups (106 g), followed by MP (71 g) and EP groups (62 g). As a consequence, fish groups fed EP showed much lower feed conversion ratio than the other two groups. Protein efficiency ratio was also significantly higher in fish groups fed EP (2.55) than in those fed MP (1.44) and SMP (1.31). Fish groups fed EP, which showed the highest nitrogen retention of 43.9%, resulted in the lowest excretion of nitrogen of 35.5 g per kg gain. Also, the lowest phosphorus excretion of 6.0 g per kg gain was found in the EP groups with the highest P retention (37.0%) among treatments. Although the EP groups had the lowest dietary energy intake, they retained the highest energy in the whole body among treatments. The present results showed that EP could be more advantageous than MP or SMP in terms of growth, feed utilization and excretion of nitrogen and phosphorus for olive flounder.

• 한국수산과학회지
• /
• 제20권2호
• /
• pp.114-118
• /
• 1987

단순만곡형과 Super-V형 전개판의 성능을 비교하기 위하여 모형실험을 실시하였다. 모형전개판은 두께 1mm되는 철판으로써 제작하였으며, 단순만곡형은 만곡도 $12\%$, 평면투영면적 $432cm^2$되게, Super V형은 횡단면의 양곡도가 어디서나 $12\%$되고 평면 투영면적은 $436cm^2$되게 하였다. 실험은 측정의 결과, 단순만곡형은 최대 유교진행각도가 $25^{\circ}$이고, 그 때의 전개력계수는 1.47, 항력계수는 0.42이며, Super-V형은 그것이 각각 $20^{\circ},\;1.40,\;0.40$으로서 유체역학적성능은 단순만곡형이 다소 우수하다고 판단된다.

• 한국수산과학회지
• /
• 제45권1호
• /
• pp.35-42
• /
• 2012

We investigated the effect of dietary supplementation with probiotics on growth performance, feed utilization, innate immunity and disease resistance against Streptococcus iniae in juvenile olive flounder Paralichthys olivaceus. Four experimental diets were made by supplementation with three Bacillus sp. probiotics (B. subtilis, B. pumilus and B. licheniformis) into a basal diet (control) at 0.5% each. Three-hundred fish (average BW, 20 g) were randomly distributed (25 per tank) into twelve 150 L capacity polyvinyl circular tanks with three replicates per dietary treatment. Triplicate groups of fish were fed the experimental diets to apparent satiation (twice per day, 09:00 and 17:00 h) for nine weeks. After the feeding trial, a challenge test was directly conducted against S. iniae. The results indicated that dietary supplementation with the probiotic, Bacillus sp, seemed to improve growth performance of olive flounder. Hematological parameters and innate immunity as determined by nitroblue tetrazolium, myeloperoxidase or superoxide dismutase activities were not significantly affected by the probiotic supplementation. The result from the challenge test suggested that dietary supplementation with probiotics Bacillus sp. can improve the disease resistance of olive flounder against S. iniae.

• 한국수산과학회지
• /
• 제50권3호
• /
• pp.287-295
• /
• 2017

Egg development and morphological change of larvae of the Sakhalin sole Limanda sakhalinensis were studied by observing specimens obtained in a rearing experiment from fertilized eggs to the juvenile stage. The wild broodstock was collected in January 2010 and kept in a circular water tank (${\O}1.5{\times}1m$) at a temperature of $14.5{\pm}0.5^{\circ}C$. Fertilized eggs ranged from 0.72 to 0.82 mm ($0.77{\pm}0.07mm$, $mean{\pm}SD$) in diameter. The eggs were spherical, transparent and adhesive demersal. The egg yolk was divided from the oocyte 10 min after fertilization (AF), and an embryo was formed in 36 h AF. More than 50% of the eggs hatched within 133 h AF. The mouth and anus did not open until $3.5{\pm}0.25mm$ total length (TL). At 4, days after hatching (AH), the fish became larvae 3.7 to 4.2 mm ($4.0{\pm}0.36mm\;TL$), yolk absorption was completed and the mouth began to open. The left eye moved upward and the nostril moved to the right at 39 days AH. These post-larvae ranged from 8.0 to 9.9 mm TL ($8.9{\pm}1.33mm\;TL$). At 50 days AH, the fish became juveniles ($12.4{\pm}1.20mm\;TL$) There were 70-72 dorsal fin rays, 55-56 anal fin rays, 11 pectoral fin rays, and 6 ventral fin rays and the juveniles adopted a benthic life.

• 한국어류학회지
• /
• 제22권3호
• /
• pp.195-200
• /
• 2010

대구 부화자어 대량방류를 위한 기초 연구로서 대용량 부화기를 이용한 대구 수정란 부화 방법을 검토하였다. 기존의 용량 15L와 시험용 42L인 부화기에 수정란을 수용한 결과 9일째 생존율이 48.3%와 50.4%로 나타나 부화기 용량차이에 따른 생존율은 유의한 차이가 없었다. 제작한 실험 부화기와 기존의 원형수조에서 수정란 생존율을 비교한 결과 40.0~71.2%로 부화기에서 높아 대구 수정란 부화에 실험 부화기가 효율적인 것으로 사료된다. 또한 42 L 부화기에 수정란 5,000 mL (약 825만 개)를 수용하여도 높은 부화율을 유지하였다. 결과적으로 대구 수정란 부화 시 대용량 부화기를 이용할 경우, 고밀도로 수용하여도 높은 수정란 생존율 유지가 가능하고 사육 공간과 인력 및 경비를 절감할 수 있을 것으로 생각된다. 또한 원형수조에 비하여 사육수 절약 (6,700 mL/min)과 수정란 그룹별 수용이 가능하다는 장점이 있다.

• 한국수산과학회지
• /
• 제20권4호
• /
• pp.348-354
• /
• 1987

실험실에서는 민꽃게 대상으르 생각될 수 있는 그 물통발을 4가지 형태로 제작하고, 이를 통발에 대한 민꽃게의 행동을 수조실험을 통해 조사하여 다음과 같은 결과를 얻었다. 1) 민꽃게의 색이행동은 시각과 후각에 의하며, 입롱시 매우 강한 경계행동을 보였다. 2) 민꽃게의 통발접촉수는 통발투하후 점차 증가하여 주로 30분 이내에 최대치를 보였다가 차차 감소하였다. 3) 민꽃게의 입롱은 통발 투하후 30분 이내에 주로 일어났고, 입롱이 빨리 일어날수록 최대접촉수도 빨리 나타났다. 4) 통발에 접촉한 민꽃게가 입구쪽으로 유도되는 것은 평면형상이 원형인 통발에서 쉬웠고, 입구부근에서 입구속으로 유도되는 것은 입롱과 출롱은 근본적으로 입구가 하부에 난 통발에서 쉬웠다. 5) 입구 끝이 통발내로 휘어저 들어간 것은 민꽃게의 출롱방지에 효과가 있었다. 6) 입구끝에 혀그물이 있으면 민꽃게의 입롱이 심하게 방해되나, 출롱은 전혀 보이지 않았다.

• 한국수산과학회지
• /
• 제20권6호
• /
• pp.484-488
• /
• 1987

단순만곡형과 슈퍼-V형 모형 전개판의 뒷전 쪽에 각각 flap을 부착하고, 회류수조에서 진행각도와 유속에 따른 항력과 전개력을 측정하여 유체역학적인 전개성능을 분석한 결과는 다음과 같다. 1. flap을 부착한 모형 전개판의 전개력계수 $C_L$은 flap각도 $30^{\circ}$와 $50^{\circ}$일 때 단순만곡형은 최대유효진행각도 $\alpha_{max}=25^{\circ}$ 1.75 정도이었고, 슈퍼-V형은 $\alpha_{max}=20^{\circ}$에서 1.80정도로 flap을 부착하지 않은 경우보다 $20\~30\%$ 정도 $C_L$이 증가하였다. 2. 항력계수 $C_D$는 $\alpha_{max}$ 일 때 flap각도에 관계없이 단순만곡형과 슈퍼-V형 모두가 0.5 정도로 거의 차이가 없었고, flap을 부착하지 않은 경우보다는 약간 $C_D$가 증가하였다. 3. 유체효율 $C_L/C_D$는 flap각도 $30^{\circ}$일 경우가 $50^{\circ}$일 경우보다 약간 높았으나, $\alpha_{max}$일 때는 거의 비슷하였으며, flap를 부착하지 않은 경우보다는 악간 높은 경향을 보였다.

• 대한치과기공학회지
• /
• 제42권3호
• /
• pp.208-212
• /
• 2020

Purpose: This study aimed to analyze the shrinkage and expansion strain of ultraviolet (UV)-cured resin according to the wavelength of the light source and compare the shrinkage and expansion. Methods: We prepared the mold with according to the ISO 4049 specimen. The size of the circle in the mold was prepared with a height of 6.02 mm and a diameter of 4 mm. UV-curable resin for three-dimensional (3D) printing was injected into the circular mold. The control group was irradiated with a wavelength of 400~405 nm using UV-curing equipment (400 group), and the experimental group was irradiated with a wavelength of 460~465 nm (460 group). Both groups were produced ten specimens. The produced specimen was first measured with a digital micrometer. After the first measurement, the specimen was immersed in a constant temperature water bath for 15 days, after which the second measurement was performed, and the third measurement was taken after 30 days. The measured values were analyzed using the independent sample t-test (α=0.05). Results: In the non-immersion water tank, the contraction was 0.9% in the 400 group and 1.3% in the 460 group. In the constant temperature bath, the expansion was high at -0.4% in the 400 group for 15 days, and the smallest expansion was -0.03% for the 400 group for 30 days. There were significant differences between the two groups (p<0.05). Conclusion: The 400 group had a lower UV resin specimen strain than the 460 group. Therefore, it is recommended to use the wavelength required by the UV-curing resin.

• 한국공작기계학회논문집
• /
• 제11권6호
• /
• pp.75-82
• /
• 2002

Design for a quiet operation of fluid power system requires the understanding of noise and vibration characteristics of the system. It's not easy to analyze noise problem in hydraulic cylinder used in typical actuator Because they've got complex fluid dynamics. One of the fundamental problems associated with the hydraulic system is the pulsating flow in pipe lines, which can be tackled by the analysis under simplifying assumptions. The present study focuses on theoretic analysis and experimental study on the dynamics of laminar pulsating flow in a circular pipe. We analyze the propagation characteristics of the pressure pulse within a hydraulic pipe line taking into account the pulsating flow frequency variation. We also measure instantaneous pressure pulses within pipe line to identify the transfer functions. We conduct series of experiments to investigate the propagation characteristics of pressure pulse for various pressure of pulsating flow. The working fluid of the present study is ISO VG46 and the temperature ranges from 20 to $60^{\circ}$ with normal pressure at 4000kPa. The flow rate is measured by using an ultrasonic flow meter. Pressures at fixed upstream and downstream positions are measured concurrently. The electric signals of the pressure sensor are stored and analyzed using a system analyzer(PKE 983 series). The frequency is varied in the range of 10~500Hz. The Reynolds number is kept below 2,000. In the present study, boundary condition was varied by installing a surge tank and an orifice at the end of pipe. Experimental and theoretical results were compared each other under various boundary conditions.