• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.930-936
• /
• 2007

In this paper, the high gain and broadband antenna operating for SDMB(Satellite Digital Multimedia Broadcasting) system is realized, The proposed antenna consists of the SAP(Shorted Annular Patch) structure, which inhibits surface-wave and the parasitic SAP element with spacing of $0.25 {\lambda}_0$ in order to improve gain, bandwidth and directivity. The RHCP(Right Hand Circular Polarization) is generated by two slits, which are made along the periphery of the circular patch at the diametrically opposite points, The simulated maximum gain of the proposed antenna is 12.6 dBi, which is better 5.22 dBi than maximum gain of the conventional microstrip patch antenna. The measured maximum gain is 10.5dBi at operating frequency 2.63GHz. Also, the measured impedance bandwidth$(VSWR{\leq}2)$ of the proposed antenna is $360MHz(2.488{\sim}2.848 GHz)$, which is better 300 MHz than the bandwidth of the conventional microstrip patch antenna. The measured HPBW(Half Power Beam Width) of the proposed antenna is $45.8^{\circ}$, and the measured FBR(Front to Back Ratio) is 15.49 dBi, The 3dB axial ratio bandwidth is 220 MHz$(2.54{\sim}2.76 GHz)$.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.11 s.102
• /
• pp.1067-1074
• /
• 2005

Studied antenna's basic structure was circular micro-strip patch antenna. Bandwidth was broaden and back-radiation pattern was decreased because studied antenna had PBG on a ground for improvement in its defect which is skin-effects. And character of antenna according to different shape of PBG was observed. Finally, air-gap whose dielectric constant is lower than substrates was added between substrates sc respond frequency was higher despite small size antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.5
• /
• pp.757-765
• /
• 1999

In this paper, L-Type aperture coupled circular polarization patch antenna for mobile communication(IMT-2000, 1.9375 GHz), which is capable of being mounted in mobile unit, was designed and fabricated. This antenna is expanded to the $2\times2$ circular polarization array antenna for satellite mobile communications which are using the L-band frequency. The results are as followings : Returnloss 18.56 dB, beamwidth $60^{\circ}$, gain 7 dBd, axial ratio 0.9 dB in the case of single element and returnloss 28.43 dB, beamwidth $38^{\circ}$, gain 9.8dBd, axial ratio 1.5 dB in the case of $2\times2$ array, respectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.542-545
• /
• 2003

An microstrip array antenna is designed based on the Sierpinski equilateral triangular patch. The Sierpinski geometry is composed of 3 equilateral triangular patch and is easy to generate a circular polarization by sequential rotation array techniques. This 1${\times}$3 Sierpinski equilateral triangular patch antenna is extended to 8${\times}$8 array antenna for satellite broadcasting receptions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.461-466
• /
• 2004

In this paper, the novel patch antenna for polarization diversity using switching element is presented. The proposed antenna consists of the square patch with a pair of truncated corners and a microstrip-feed line with power divider. A switching microstrip-line feed works at schottky diode ON / OFF that is placed at $\lambda$/4 point from branch-off point of power divider. Polarization diversity has two types(LHCP. RHCP) as switching the schottky diodes. The measured 3 ㏈ axial ratio bandwidth for switching operation is about 2 %.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2008.04a
• /
• pp.807-808
• /
• 2008

This is concerned with the radiation pattern of elastic waves in a plate generated by an orientation-adjustable patch-type magnetostrictive transducer. In general, not only the Lamb waves but also shear horizontal (SH) waves are produced by the deformation of the circular magnetostrictive patch bonded to a plate. Among the two types of waves, this paper investigates the radiation patterns of SH waves. A number of experimental results are presented. They are also accurately predicted by a theory developed by the present authors. Experimental findings were explained by a theoretical analysis.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.533-540
• /
• 1999

In this paper, a microstrip antenna is designed using a rectangular patch. To find characteristics of the antenna, computer simulations of the rectangular single microstrip patch antenna are performed with changing width and feed line. And we found characteristics of RHCP using axial ratio. Through the results, we found that the Finite Difference Time Domain(FDTD) method is an effective method for designing microstrip patch antenna. According to simulation the resonant point has been found it in the frequency received from GPS satellite. And these results were in relatively good accordance with the measured values.

• Structural Engineering and Mechanics
• /
• v.59 no.1
• /
• pp.123-132
• /
• 2016

Many military and commercial aging aircrafts flying beyond their design life may experience severe crack and corrosion damage, and thus lead to catastrophic failures. In this paper, were used in a finite element model to evaluate the effect of corrosion on the adhesive damage in bonded composite repair of aircraft structures. The damage zone theory was implemented in the finite element code in order to achieve this objective. In addition, the effect of the corrosion, on the repair efficiency. Four different patch shapes were chosen to analyze the adhesive damage: rectangular, trapezoidal, circular and elliptical. The modified damage zone theory was implemented in the FE code to evaluate the adhesive damage. The obtained results show that the adhesive damage localized on the level of corrosion and in the sides of patch, and the rectangular patch offers high safety it reduces considerably the risk of the adhesive failure.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2001.02a
• /
• pp.142-144
• /
• 2001

We designed superconducting four-element patch array antenna which has single-feed circularly polarization and a resonance frequency of 11.85 GHz for DBS receiving system. Antennas have been fabricated from both gold conductor and $YBa_{2}$$Cu_{3}$$O_{7-x}$(YBCO) superconductor (thin films) for comparison. Simulated and measured results, and analysis on resonant frequency(fr), return loss, and bandwidth are presented.

• International Journal of Safety
• /
• v.8 no.1
• /
• pp.1-5
• /
• 2009

The CFRP composite has unique properties that offer high strength and stiffness, even though it has light weight. Therefore it can be used in many industrial applications. When mechanical fasteners are used for joining composites, high stress concentrations appear near the edge of holes prepared for accommodating structural bolts and rivets. This presence of high stress concentrations can be a source of damage. The aim of this work is to evaluate fracture behavior and patterns of plain woven CFRP with circular hole and repairing patch element. The maximum strength and pattern for the plain woven carbon composite specimen with the repaired circular hole were examined. From the results, we show that repairing of the CFRP composite specimen with ($\pi$) 3~5 mm of circular hole diameter results in load rising effect and the repairing is more effective as bigger hole specimen.