• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.2
• /
• pp.10-23
• /
• 2009

The fundamental matrix and key frame selection are one of the most important techniques to recover full 3D reconstruction of objects from turntable sequences. This paper proposes a new algorithm that estimates a robust fundamental matrix for camera calibration from uncalibrated images taken under turn-table motion. Single axis turntable motion can be described in terms of its fixed entities. This provides new algorithms for computing the fundamental matrix. From the projective properties of the conics and fundamental matrix the Euclidean 3D coordinates of a point are obtained from geometric locus of the image points trajectories. Experimental results on real and virtual image sequences demonstrate good object reconstructions.

• Imaging Science in Dentistry
• /
• v.31 no.2
• /
• pp.85-91
• /
• 2001

Purpose: To evaluate the effect of the slice thickness and the size of region of interest (ROI) on CT number using quantitative CT phantom Materials and Methods: The phantom containing 150 mg/cc, 75 mg/cc and 0 mg/cc calcium hydroxyapatite was scanned with 1, 3, 5 and 10 mm slice thicknesses by single energy quantitative computed tomography (QCT). CT numbers were measured on center position of the phantom. Shape of ROI was circular and sizes were 1, 3, 5, 11, 16, 21, 26 and 33 mm². ANOVA and Tukey's multiple comparison method were performed for statistical comparison of CT numbers according to different slice thicknesses. Coefficient of variation of CT number measured in each size of ROI was evaluated in same slice thickness. Results : CT numbers had statistically significant difference according to slice thicknesses (p<0.05). As the slice thickness increased, CT number also increased. As the density of phantom became lower and the size of ROI became smaller, the coefficient of variation of CT number increased. When the size of ROI was more than 11 mm² in 1 mm slice thickness, 5 mm² in 3 mm slice thickness and 3 mm² in 5 mm slice thickness, the coefficient of variation became consistent. In 10 mm slice thickness, the size of ROI had little effect on the coefficient of variation. Conclusion: CT number had variation according to the slice thickness and the size of ROI although the object was homogeneous. The slice thickness and the size of ROI are critical factors in precision of the CT number measurements.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.1
• /
• pp.23-29
• /
• 2020

Since the movements of a machine are driven by a certain principle, there is a fundamental principle that governs the movement of the machine, no matter how complex and diverse it may be. Autonomous movements are a way to avoid repetition, to approach more humane and more natural factors. That's all the more so when it comes to original movements, not cloning. So now, the dynamics of the machine are more multi-sensory by human participation. It is challenging the potential to be expressed and is gradually expanding its sphere of expression in the boundaries of fact and cloning. Theo Jansen's works have changed from period to period to adapt to different circumstances, indicating that his decades-long work has continued to evolve from early to present. The evolution's focus, among other things, can be seen as having the same source of circular motion and horizontal reciprocating motion, which are repeated from the principle of organic coupling between the parts that make up the object.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.11
• /
• pp.13-18
• /
• 2022

In this study, the suitability of the grouting method will be evaluated by analyzing seismic reinforcement methods for the stability of gravity structure in Port. The evaluation categories are liquefaction, sliding, toppling and circular failure. To compare the appropriateness of the seismic reinforcement method, the low mobility mortar injection, one of the grouting method and the SPC file and GRB method, which are pile wall type reinforcement methods, were evaluated and compared respectively. The object of the evaluation is the gravitational structure of Po-Hang old port. As a result of the evaluation, both the grouting method and the pile wall type reinforcement method are considered to have sufficient stability. Therefore, in the case of the gravity structure, the grouting method is more efficient than the seismic reinforcement method considering construction efficiency, economic efficiency, maintenance and similar construction cases.

• Journal of Digital Convergence
• /
• v.20 no.5
• /
• pp.211-220
• /
• 2022

This paper proposes a green closed-loop supply chain network (GCSN) for optimizing closed-loop supply chains. The GCSN focuses on the application of the recycling express box in logistics circulation, accelerates the standardization of logistics operations and the use of express packaging in e-commerce companies, and promotes the reduction and greening of recycling express box in the e-commerce industry. The GCSN is represented as a mathematical formulation and implemented using LINGO. Greening, environmental protection, and wisdom are the general trends for promoting the growth of the e-commerce industry. Meanwhile, the price of raw materials has increased owing to a shortage of resources, which emphasizes the need for e-commerce enterprises to develop green packaging. Therefore, this study considers the shared circular packaging launched by e-commerce enterprises as the research object, and integrates the problem of facility positioning and path planning in the logistics system. The conclusion summarizes the significance of this study.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.101-109
• /
• 2009

An encryption module is equipped basically at 8i version ideal of Oracle DBMS, encryption module, but a performance decrease is caused, and users are restrictive. We analyze problem of DB security by technology by circles at this paper whether or not there is an index search, object management disorder, a serious DB performance decrease by encryption, real-time data encryption beauty whether or not there is data approach control beauty circular-based IP. And presentation does the comprehensive security Frame Work which utilized the DB Masking technique that is an alternative means technical encryption in order to improve availability of DB security. We use a virtual account, and set up a DB Masking basis by security grades as alternatives, we check advance user authentication and SQL inquiry approvals and integrity after the fact through virtual accounts, utilize to method as collect by an auditing log that an officer was able to do safely DB.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.2
• /
• pp.231-242
• /
• 2014

It is throwing the spotlight on the cultivation crops about high quality crops and productivity improvement per unit area because of rapid climate change caused by global warming. Therefore, we propose a water culture management of circulation nutrient method control system applies to solar tracking method not using traditional method of deep flow technique and artificial light source. We design it in the form of the circulation nutrient method in waterway of a certain amount of nutrient solution and water flowed into the way of circular. In addition, we design a multistage structure in pyramid shape which be possible continuous photosynthesis action to crops of water culture bottom part. Also, solar tracking method is designed five sensor method of center hole sensor method for tracking shadow of solar light not using traditional two hole, four hole sensor method. Finally, through the water culture device applies to solar light tracking method was not introduced in existing study yet, we can reduce growth speed of crops which be possible continuous photosynthesis action to crops. Moreover, We can expect high productivity of per unit area which be possible all crops can be offered growth environment of same type by using form of pyramid shape of multistage structure without top or bottom part.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.12 no.10
• /
• pp.758-765
• /
• 2002

KITECH and ODS performed a study of internal and external noise prediction of the Korean high speed prototype test train(HSR 350X). The object of this study was 3 kinds of cars, trailer car(TT2), motorized car(TMI ) and power car(TPI) and the predicted noise was for the two different driving speeds in free field and tunnel conditions. Data of carbody design and noise sources were delivered from manufactures. Some of noise sources which were not available in the project team, were chosen by experiences of ODS. Internal noise level of each car was predicted for two cases i.e, at 300 km/h and 350 km/h. In addition sound transmission path and dominant noise sources were also investigated for each section of the car, which is circular shell typed part of whole carbody. In case of TT2, the dominating sound transmission path is the (floor in terms of structure-borne noise and air-borne noise. The main noise sources are structure-borne noise from the yaw-damper and air-borne noise from the wheel/rail contact, whereas the dominating sound transmission path of TMI are floor and sidewall below the window in terms of structure-borne noise. The main noise sources of TMI are structure-borne noise from motor/gear unit and the yaw-damper in the free field, and air-borne noise from the wheel/rail contact and structure-borne noise from motor/gear unit in the tunnel. Through the external noise prediction for the KHST test train formation, the noise form the wheel/rail contact is estimated as one of the major sources. In addition, the noise specification of sub-component was proposed for managing each sub-surpplier to reach the KHST noise requirement. The specification provide the sound power of machinery part and transmission loss of component of carbody structure. The predicted noise level in each case exceeded the required limit. Through this study, the noise characteristics of the test train were investigated by simulation, and then the actual test will be performed in near future. Both measured and calculated data will be compared and further work for noise reduction will be continued.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.217-231
• /
• 2017

The subsidence of ground in urban area can be caused by the occurrence of the cavity and the change in ground volumetric water content. The objective of this study is the detection of abnormal area of ground in urban area where the cavity or the change in ground volumetric water content is occurred by the ground penetrating radar signal. GPR survey is carried out on the test bed with a circular buried object. From the GPR survey, the signals filtered by the bandpass filtering are measured, and the methods consisting of gain function, time zero, background removal, deconvolution and display gain are applied to the filtered signals. As a result of application of the signal processing methods, the polarity of signal corresponds with the relation of electrical impedance of the cavity and the ground in test bed. In addition, the relative permittivity calculated by GPR signal is compared with that of predicted by volumetric water content of the test bed. The relative permittivities obtained from two different methods show similar values. Therefore, the abnormal area where the change in ground volumetric water content is occurred can be detected from the results of the GPR survey in case the depth of underground utilities is known. Signal processing methods and estimation of relative permittivity performed in this study may be effectively used to detect the abnormal area of ground in urban area.

• The Journal of the Korea Contents Association
• /
• v.13 no.1
• /
• pp.156-163
• /
• 2013

In the past, the enlargement of perception through media was 'information'. From now on, however, the primary objective of media is to consist not in conveying information but in sharing the values of 'emotion' and 'experience' that are perceived through information. Individual emotional becomes an issue due to the limitations of the ideology of modernism and the pervasiveness of the autonomous perception in the human thinking that started in postmodernism. If we once again talk about a function-focused, sensible approach for the sake of marketing in the current era that has impinged on the limits of mammonism, we must keep in mind that 'emotion,' presently retaken as the originary, human value and the value of new communication, may come to an end any time. Therefore, th current thesis is designed to examine John Dewey's 'transaction' as a method for figuring out the concept of emotion, the perceptional function latent in humans. Dewey's 'transaction,' which is a term that refers to the reciprocal relationships between humans and environment and the accompanying totality of perceptive process, interprets human emotion, user experience and environment as the organic, circular relationships. For such understanding, one must break out of the boundary of the past, dichotomous communication between the subject and the object to expand into the perceptional relations in a wider environment, in order to seek design methods that would help dismantle the borderline that has so far separated the developer from the user, share sensibilities, and express experiences.