• 제목/요약/키워드: Circular Distance

검색결과 325건 처리시간 0.025초

다양한 벽면 두께를 갖는 원형 노즐에서 분사되는 난류 충돌 및 벽면 제트 유동장 특성 (Characteristics of Turbulent Impinging and Wall Jet Flow for a Circular Nozzle with Various Exit Wall Thickness)

  • 양근영;윤상헌;손동기;최만수
    • 대한기계학회논문집B
    • /
    • 제25권6호
    • /
    • pp.751-757
    • /
    • 2001
  • An experimental study of impinging jet-flow structure has been carried out for a fully developed single circular jet impingement cooling on a flat plate, and the effect of the wall thickness at nozzle exit edge is investigated. Impinging jet flow structures have been measured by Laser-Doppler Velocimeter to interpret the heat transfer results presented previously by Yoon et al.(sup)(10) The peaks of heat transfer rate are observed near the nozzle edge owing to the radial acceleration of jet flow when the nozzle locates close to the impingement plate. The growth of the velocity fluctuations in the wall jet flow is induced by the vortices which originate in the jet shear layer, and consequently the radial distribution of local Nusselt numbers has a secondary peak at the certain radial position. As a wall of circular pipe nozzle becomes thicker for small nozzle-to-target distance, the entrainment can be inhibited, consequently, the acceleration of wall jet flow is reduced and the heat transfer rate decreases.

차분래티스 볼츠만 법을 이용한 저Mach수 흐름에서의 유동소음해석 (Numerical Simulation of Aeroacoustic Noise at Low Mach Number Flows by Using the Finite Difference Lattice Boltzmann Method)

  • Eun-Ra Kim;Jeong-Hwan Kim;Ho-Keun Kang
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제28권5호
    • /
    • pp.717-727
    • /
    • 2004
  • In this study, we simulate the aerodynamic sounds generated by a two-dimensional circular cylinder in a uniform flow are simulated by applying the finite difference lattice Boltzmann method (FDLBM). The third-order-accurate up-wind scheme (UTOPIA) is used for the spatial derivatives. and the second-order-accurate Runge-Kutta scheme is applied for the time marching. The results show that we successively capture very small acoustic pressure fluctuations with the same frequency of the Karman vortex street compared with the Pressure fluctuation around a circular cylinder The propagation velocity of the acoustic waves shows that the points of peak pressure are biased upstream due to the Doppler effect in the uniform flow For the downstream. on the other hand. it quickly Propagates. It is also apparent that the amplitude of sound Pressure is Proportional to $r^{-1/2}$, r being the distance from the center of the circular cylinder. To investigate the effect of the lattice dependence furthermore a 2D computation of the tone noise radiated by a NACA0012 with a blunt trailing edge at high incidence and low Reynolds number is also investigated.

UHF RFID 시스템을 위한 Polarization Selective 안테나 설계 연구 (A Study on the Design of Polarization Selective Antenna for UHF RFID System)

  • 이사원;송우영
    • 한국항행학회논문지
    • /
    • 제14권2호
    • /
    • pp.170-175
    • /
    • 2010
  • 본 논문은 UHF RFID 시스템을 위해 편파를 선택할 수 있는 리더 안테나를 설계 및 구현하였다. 제안된 리더 안테나는 두 개의 급전부를 가지는 마이크로 스트립 패치 안테나와 두 개의 SPDT 스위치와 하나의 SP4T 스위치와 3dB hybrid coupler로 구성되어 있다. 각각의 스위치 전압을 조절하여 수직 방향의 선형 편파와 수평방향의 선형 편파, 좌수 원형 편파와 우수 원형 편파를 선택할 수 있다. 제안된 안테나는 902MHz ~ 928MHz 대역에서 VSWR 2:1을 만족하고 원형 편파로 선택되었을 때 AR (Axial Ratio)은 3dB 이하로 측정되었다. 또한 사용 환경 및 태그의 편파 방향에 적합한 편파를 선택할 수 있기 때문에 PLF (Polarization Loss Factor)를 최소화 할 수 있고 태그의 인식거리를 확장 시킬 수 있다.

원형 정착구를 적용한 프리스트레스트 콘크리트 정착구역의 파열력에 관한 연구 (Study on Bursting Stress in Anchorage Zone of Prestressed Concrete Using Circular Anchorages)

  • 최규형;노병철
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제19권1호
    • /
    • pp.3-12
    • /
    • 2015
  • 포스트텐션 공법의 파열력 계산은 탄성이론을 기반으로 한 Guyon의 제안식이 널리 활용되고 있다. Guyon의 파열력 계산식은 프리스트레스 힘과 콘크리트 단면 길이에 대한 정착판 단면 길이의 비가 주요 변수 이다. Guyon이 제시한 파열력 계산 방법은 사각형 정착판이 적용된 정착구를 기준으로 하고 있으나, 원형 정착구에 대해서도 그대로 적용하고 있다. 또한 Guyon은 정착구역에서 발생하는 복잡한 응력을 2차원으로 단순화하였다. 따라서 본 연구에서는 원형 정착구에 적용 가능 한 파열력 계산식을 제안하기 위하여 기존 이론의 분석과 정착구역에서 발생하는 응력에 대해 3차원 분석을 수행하였다. 기존의 파열력 계산식을 개선한 원형 정착구의 파열력 계산식을 제안하였다.

1.6GHz대역용 광대역 원편파 패치 안테나 설계 (Design of Wideband Circular polarized Patch Antenna for 1.6GHz band)

  • 김건균;이승엽;여준호;이종익;강녕학
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2017년도 춘계학술대회
    • /
    • pp.61-62
    • /
    • 2017
  • 본 연구에서는 주파수 1.5GHz~1.7GHz 넓은 대역에서 동작하는 내부 슬롯과 외부 스터브를 갖는 원형편파 패치 안테나를 설계하였다. 광대역 특성과 고 이득을 갖기 위해 기본적으로 접지판으로부터 높은 공기층을 적용하였다. 임피던스 대역폭을 개선하기 위하여 패치의 크기, 매인 패치와 접지판 간거리, 내부 슬롯의 길이, 급전 위치, 외부 스터브의 길이 등을 조정하였다. 시뮬레이션을 통해 1.5GHz~1.7GHz 대역의 안테나를 설계하고 반사손실, 이득, 방사패턴 등의 안테나 특성을 확인하였다.

  • PDF

외부 특이점이 2차원 원주에 작용하는 힘의 특성 (Characteristics of Forces upon Two-dimensional Circular Cylinder by External Singularities)

  • 이승준
    • 대한조선학회논문집
    • /
    • 제47권6호
    • /
    • pp.782-786
    • /
    • 2010
  • Thrust deduction related to the prediction of power performance of a ship is rather resistance increase, and as a preliminary study for it forces upon a circular cylinder in a uniform flow of ideal fluid due to singularities located behind it are investigated. The circle theorem is used to get the complex velocity potential for the flow field under consideration, and the Blasius theorem is applied to obtain forces upon the circular cylinder. As singularities sinks, point vortices and dipoles and their combinations are treated. $\varepsilon$, standing for the strength of a singularity, and $\delta$, representing the distance between the cylinder and the singularity, are important small parameters for the resistance and lateral forces. For sinks or point vortices it is shown that the dimensionless forces upon the cylinder is O($\epsilon$) if $\epsilon$= O($\delta$) is assumed, and the same holds for dipoles if $\epsilon$= O(${\delta}^3$) is supposed. Forces upon the cylinder by a symmetric pair of sinks are greater than a single sink located at the central plane since there is an additional term due to cross effects, and the same is also valid for the case of dipole. Combination of dipole and a point vortex is also considered and a few new aspects are clarified.

2차원 원주로부터 발생하는 Aeolian tone의 수치계산 (Numerical Simulation of the Aeolian Tone Generated from Two-dimensional Circular Cylinder)

  • 강호근;노기덕;손영태
    • 한국해양공학회:학술대회논문집
    • /
    • 한국해양공학회 2002년도 추계학술대회 논문집
    • /
    • pp.234-239
    • /
    • 2002
  • Acoustic sounds generated by a uniform flow around a two-dimensional circular cylinder at Re=200 are simulated using finite difference lattice Boltzmann method. A third-order-accurate up-wind scheme is used for spartial derivatives, and a second-order-accurate Runge-Kutta scheme is used for time marching. The results show that in capturing very small acoustic pressure fluctuation with same frequency of Karman vortex street compared with the pressure fluctuation around a circular cylinder. The propagation velocity of acoustic sound is presented that acoustic which approaches tire upstream due to Doppler effect in the uniform flow slowly propagates, while that for the downstream quickly propagates. It is also apparent that the size of sound pressure is proportional for central distance $r^{-1/2}$ of the cylinder.

  • PDF

자유표면 밑을 전진하는 원주 주위의 유동에 관한 연구 (Study on Flow Around Circular Cylinder Advancing Beneath Free Surface)

  • 이혁준;신현경;윤범상
    • 한국해양공학회지
    • /
    • 제27권5호
    • /
    • pp.16-21
    • /
    • 2013
  • The flow around a circular cylinder advancing beneath the free surface is numerically investigated using a VOF method. The simulations cover Froude numbers in the range of 0.2~0.6 and gap ratios (h/d) in the range of 0.1~2.0, where h is the distance from the free surface to a cylinder, and d is the diameter of a cylinder at Reynolds number 180. It is observed that the vortex suppression effect and surface deformation increase as the gap ratio decreases or the Froude number increases. The most important results of the present study are as follows. The proximity of the free surface causes an initial increase in the Strouhal number and drag coefficient, and the maximum Strouhal number and drag coefficient occur in the range of 0.5~0.7. However, this trend reverses as the gap ratio becomes small, and the lift coefficient increases downward as the gap ratio decreases.

Experimental shear strength evaluation of perfobond shear connector with various hole shapes

  • Zheng, Shuangjie;Zhao, Chen;Liu, Yuqing
    • Structural Engineering and Mechanics
    • /
    • 제67권2호
    • /
    • pp.131-142
    • /
    • 2018
  • The perfobond connector, composed of a steel plate with a number of holes, serves as a certain type of shear connector in steel and concrete composite structures. Depending on limits in hole distances and rib heights, various hole shapes including circular-hole and long-hole are alternatives for perfobond connectors. This study presented the results of tests performed on 72 push-out specimens with perfobond connectors. The purpose was to evaluate the shear strength of perfobond connectors with circular-hole and long-hole. The effects of various parameters were investigated, including the hole diameter, the hole length, the hole height, the concrete strength, the existence, diameter and strength of rebar in the hole, the thickness, height and distance of perfobond ribs, and the thickness of concrete slabs. On the basis of 132 push-out test results in references and in this study, an analytical model was proposed by regression analysis to predict the shear strength of perfobond connectors. The proposed equation agreed reasonably well with the experimental results of perfobond connectors with different hole shapes.

Wideband Double-Radiator Circular Disc Annular Monopole Antenna

  • Afoakwa, Samuel;Diawuo, Henry Abu;Jung, Young-Bae
    • Journal of information and communication convergence engineering
    • /
    • 제16권4호
    • /
    • pp.252-257
    • /
    • 2018
  • A wideband double radiator circular disc annular monopole antenna is proposed is this work. The radiators are etched on the surfaces of two Taconic TLY-5 substrates with a circular hole cut out of each of the radiators initially at the centers of the radiators with subsequent downward displacement of the holes. The antenna is designed with a two-step feeding transformer system for impedance matching between the input power source supplied by a $50-{\Omega}$ SMA connector and the monopole radiators. The transformer system improves the bandwidth performance at higher frequencies. The proposed antenna achieves a wideband having the capability of working between 0.645 and 18.775 GHz, corresponding to a -10 dB bandwidth of 186.7% with gain ranging from 0.95 to 8.26 dBi. In comparison to other metal disc planar monopole antennas, the proposed antenna has a small total size width due to the size of the ground plane, which has a diameter 100 mm. The frequency range of the antenna provides applications in global positioning systems, mobile communications, ultra-wideband short distance communications, and wireless computer networks.