• 한국수정란이식학회지
• /
• 제24권3호
• /
• pp.159-167
• /
• 2009

Ultrasonographic examination was performed to observe the ultrasonographic image of Korean native cows' normal uterus in condition of in vitro and in vivo. The experiment was done 28 slaughtered cows' uterus using immersed in water in vitro, and 41 healthy breeding cows taken rectal ultrasonography in vivo. Ultrasonographic examination of uterine was taken on the reference of cross section of intercornual ligaments' cranial. Each uterus on the experiments was compared by estrous cycle and ultrasonographic frequency. The uterine structure using ultrasonography was 5 layers of uterine horn in vivo as well as in vitro. Uterine horn was observed to be distinguished from inside to outside as endometrium to inner echogenic layer, circular muscle layer to slightly echogenic elliptical layer, stratum vasculare to central echogenic layer, longitudinal muscle layer to slightly echogenic arched layer, and perimetrium to outer echogenic layer, respectively. According to the observation of uterus related to estrous cycle and ultrasonographic examination, uterine endometrium in vitro was constantly founded irrespective of estrous cycle and ultrasonographic frequency. On the low frequency, endometrium and circular muscle layer in estrus were prone to distinguished than in diestrus. On the high frequency, endometrium and circular muscle layer were always distinguished regardless of estrous cycle. In vivo, uterine endometrium and circular muscle layer were observed regardless of estrus and ultrasonographic frequency. On the low frequency, stratum vasculare and longitudinal muscle layer were not likely to be distinguished in diestrus, but estrus. On the high frequency, stratum vasculare and longitudinal muscle layer were observed regardless of estrous cycle. Also, every uterine structure was easily distinguished on high frequency than low frequency owing to precision of distinction in layers. The difference of results followed by the experiments conditions between in vitro and in vivo was that uterine endometrium and circular muscle layer in diestrus in vitro were difficult to be distinguished and uterine lumen was observed during whole estrous cycle. In vivo, It was founded that the distinction of stratum vasculare and logitudinal muscle layer in diestrus was complicated and uterine lumen was observed during only estrus. In view of the result so far achieved, normal uterine structure divided in 5 layers on ultrasonography was accorded with microscopic organization, uterine structure was likely to be observed during estrus than diestrus, high frequency checkup than low frequency, and uterine endometrium, circular muscle, stratum vasculare was easily observed regardless of estrous cycle and ultrasonographic frequency.

• The Journal of the Acoustical Society of Korea
• /
• 제14권2E호
• /
• pp.73-86
• /
• 1995

전향 초음파 영상 캐서터의 트랜스듀스 (FLUIC) 부분은 진동자인 원형 전기음향 소자와 원뿔꼴 반사체인 음향 반사체로 구성된다. 소형의 전기음향 소자는 캐서터의 회전자 축 측면에 탑재된다. 전향 초음파 영상 캐서터의 특징은 기존의 IVUS 트랜스듀서가 제공할 수 없는 캐서터 전단에서 혈관의 단층 2-D 영상과 종래의 측면 영상을 동시에 제공하는 것이다. FLUIC의 트랜스듀서에 사용된 음향 반사체를 설계하기 위해 근사화된 레이 추적 기법을 이용하였다. 음향 반사체로부터 2차 외절 특성을 예측하기 위해 회절전달함수방식에[1] 의한 1차 음원으로 부터의 장 예측모델을 확장하여 일반화 하였다. 확장된 모델은 단순한 평판 반사체에 적용하여 시뮬레이션과 실험에 의해 검증되었으며 FLUIC의 잘 특성을 해석하는데 사용되었다.

• Journal of the Korean Wood Science and Technology
• /
• 제22권4호
• /
• pp.26-36
• /
• 1994

The comparative wood anatomy of 1 species belonging to genus Myrica of Myricaceae, 9 species to genus Populus and 8 species to genus Salix of Salcaceae, occurring in Korea, was described and coded according to IAWA list(Wheeler, 1989). Myrica rubra. of Myricaceae is a typical diffuse-porous wood with numerous vessels per $mm^2$ and its pores are mainly angular in outline. Vessels scalariform perforation plates with a few bars, very small inter vessel pits; axial parenchyma abundant, diffuse or diffuse-in-aggregates which is distinct and easily observed on cross section; rays 1-3 seriate, Kribs' heterogeneous I or II types, frequently contains rhomboidal crystals; Dark pigmented substances included in some rays and axial parenchyma. Salicaceae, a typical diffuse porous wood, has mainly radial pore multiple, large intervessel pits, distinct alternate pits, simple perforation plates, ray-vessel pits with circular large pits, uniseriate rays, marginal parenchyma composed of 1-2 layers. In some species, ray parenchyma contain crystals. Populus and Salix wood can be distinguished from one another by the following characters. Pores of Populus woods almost angular in outline. Uniseriate homogeneous rays slightly higher than Salix and long linear on tangential section. Whereas Salix woods appear the pores almost oval, uniseriate heterogeneous rays, which are smular narrow fusiform on tangential section and lower in height than Populus.

• 한국농공학회지
• /
• 제10권1호
• /
• pp.1394-1408
• /
• 1968

The tidal discharge is defined as the quantity of water flowing through a certain cross-section per unit of time, in contrast to river discharges, tidal discharges change periodically in magnitude and direction. Thus the total volumes of water flowing into again out of the system-called flood volume and ebb volume, respectively, depend on both the tidal and the river discharges. To ditermine the tidal discharge and the flood and ebb volumes of the Yong-san river, the discharges were measured at spring, mean and neap tide and simultaneous gage reading were taken at Samhak-do, Lower Myo-do, Myongsan-ni and Naju. The general procedure for measuring the tidal discharges was as follows. First, several cross-sections were measured and one of them was chosen. First, several cross-sections were measured and one of them was chosen. Then verticals were serected in the chosen cross section. Because comparatively few verticals should be representative of the discharge distribution over the river profile, the selection was done in accordance with the somtimes irregular bottom profile. The velocities were measured with the same current meters. The observations which included water level readings were continued for a period of about 13 hours. The current direction meter, a pyramid shaped resistance body, suspend in the water on a thin wire. The bubble in a circular tilting level fixed to the wire indicates the direction of the current. Reading were taken at intervals of 1m for depths of 10m or less, and for depths over 10m at intervals of 2m, going downwards and upwards. The averages of the two velocities were used for the computation of the discharges. The discharges and the flood and ebb volumes were ditermined by a graphical method. The mean velocities, corrected for their direction when necesary, were ditermined for each time interval and each vertical, and these velocities were plotted against the time. The resulting curves show possible mistakes very clearly, and the effect of observation errors could be reduced. The corrected velocities read from the curve at half-hour intervals were multiplied by the depth at the virtical at the corresponding time. The discharges thus found were ploted against the position of the vertical in the transit and joined by a smooth curve, integration of the curve rendered the total discharges as they occurred of half-hour intervals. Plotting these total discharges against the time yeilded during the day. The flood and ebb volumes were obtained by integration of the total discharge curve.

• 대한지리학회지
• /
• 제47권1호
• /
• pp.79-97
• /
• 2012

2002년 그린벨트 해제 이후 청주시 환상녹지에서의 주거지 확대와 주요 간선도로의 확충 등 토지이용의 변화로 인한 경관파편화를 조사하고, 비오톱 조사결과와 비교하여 생물 종풍부성에 미친 영향을 파악해 보았다. 취락확대는 동부 산림구역을 제외한 시가지에 연접한 전 구역에서 이루어졌고, 도로밀도는 지역간 도로의 교차로가 있는 남북 구역에서 높게 나타났다. 이러한 경관파편화가 종풍부성이나 개체 풍부성에 미친 영향은 동물 유형별로 다르게 나타났다. 조류의 경우 경관파편화 외에 먹이활동이 용이한 수변환경에의 근접성이 중요하게 작용하여 파편화 정도가 높은 남북(N2, N3, N4, S2) 구역에서도 종풍부성이 높게 나타났다. 양서파충류는 조류에 비해 출현 종수의 존간 편차가 거의 없기는 하나, 파편화가 클수록 종풍부성이 낮아지는 경향은 더 뚜렷하게 나타났다. 청주시의 지속가능한 녹지관리를 위해서는 경관생태에 대한 정보 축적을 기반으로 하여 경관생태계획과 도시계획을 통합 관리하는 것이 우선적으로 요구되고, 다양한 지역사회 구성원의 참여와 또한 인접한 청원군과의 월경 녹지관리 협력이 뒷받침되어야 할 것이다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제24권6호
• /
• pp.153-160
• /
• 2020

지진동 하의 구조 시스템에서 기둥은 가장 중요한 구조 요소 중 하나이다. 이러한 관계로, 철근콘크리트(RC) 기둥의 내진 성능에 FRP 보강이 미치는 영행을 평가하기 위하여 광범위한 실험 연구가 이루어졌다. 이 중 상당수는 CFRP 또는 GFRP로 보강된 원형 단면 또는 정사각형 단면의 RC 기둥의 지진 거동에 집중하였다. 단면의 형태가 FRP 보강으로 인한 구속 효과에 영향을 미치기 때문에, 보강 효과와 최종 파괴 패턴이 형상에 따라 상이할 수 있다. 본 연구에서는 현무암 섬유를 함유한 BFRP 시트와 복합섬유 패널로 보강한 직사각형 단면을 가진 RC 기둥의 지진 거동을 살펴보기 위하여 반복하중 실험을 수행하였다. 실험 결과는 보강 효과가 크지 않았음을 보여주는데, BFRP 시트와 복합섬유 패널에 의한 구속 효과의 증가가 미미했음을 의미하며, 이는 기둥 단면 형상에 일부 기인하는 것으로 판단된다.

• 한국전산구조공학회논문집
• /
• 제23권4호
• /
• pp.387-394
• /
• 2010

현재 연쇄붕괴를 방지하기 위한 설계 방법으로 기둥제거 시나리오를 이용한 대체하중경로법을 주로 적용하고 있다. 하지만 실제로 폭발이 발생하여 기둥이 완전히 제거되지 않는 경우에 기둥제거 시나리오를 적용하면 보수적인 결과를 얻게 된다. 본 논문에서는 단일 기둥이 폭발하중을 받을 때의 거동을 평가함으로써 폭발이후에도 기둥이 연쇄붕괴 방지에 기여할 수 있는지 여부를 판단하였다. 하이드로코드인 AUTODYN을 이용하였으며, 같은 단면적과 높이를 갖는 사각형 기둥과 원형 기둥의 폭발저항성능을 비교하였다. 우선 AUTODYN을 이용한 폭발하중 산정 결과를 폭발실험값과 비교한 다음 간단한 폭발 예제를 통해 계산된 폭발압력파가 실제와 유사함을 입증하였다. 단면 형상에 따른 기둥의 폭발저항 성능 해석을 수행한 후 잔류변형을 이용한 평가법을 이용해 원형기둥이 사각형 기둥보다 폭발저항 성능이 더 우수함을 확인하였다.

• 대한조선학회지
• /
• 제6권1호
• /
• pp.43-67
• /
• 1969

The effect of a circular hole reinforced by a ring of different material in a plate under biaxial loadings is considered. In this problem, an infinitely large flat is assumed. The reinforcing ring is of uniform rectangular cross-section of same thickness as the plate. The outer boundary of the ring is cemented to the inner boundary of the hole in the plate. The plate is subjected to hydrostatic tension and pure shear loadings. The stress distribution around the hole is obtained by means of the two dimensional theory of elasticity. To conform the validities of above solutions, a series of photo-elastic stress analysis for a composite model was carried out. Fair agreements were observed between two sets of values. The conclusions arrived at are as follows: 1) The theoretical solutions are exact ones for the case of infinitely large flat plate. 2) The solutions can be used for most case of engineering problem if the bonding between the plate and ring is perfect. 3) If the ratio of Young's moduli of the ring and the plate is increased, the stresses in the plate decrease whereas those in the ring increase. 4) The stress concentration near the hole has localized effect. 5) Under hydrostatic tension, maximum principal stress and maximum shear stress increase as the ratio of inner and outer diameters of the ring increases. 6) Under pure shear, the stresses depend upon angular orientations of the points and maximum principal stress and maximum shear stress appear at 45 degree. They increase as the ratio of inner and outer diameters of the ring increases.

• 플랜트 저널
• /
• 제17권3호
• /
• pp.42-46
• /
• 2021

드릴 스트링의 진동 문제는 수년간 드릴링 성능 저하의 주요 원인 중 하나로 인식되어 왔으며, 굴착 작업 시 발생하는 과도한 진동은 드릴링의 효율성, 파이프 피로, 비트의 수명 단축으로 인하여 고장을 초래할 수 있다. 이러한 진동의 원인은 드릴 스트링이 굴착 작업 중 궤적에 따라 파이프의 굽힘과 wellbore와의 접촉으로 인해 마찰이 발생하고 이러한 진동은 일반적으로 축 방향, 굴곡 및 비틀림 변형을 일으킨다. 본 연구에서는 Khulief와 Al-Naser가 제시한 모델을 바탕으로 드릴 스트링에 6자유도(DOF)의 구성요소를 갖는 모델을 적용하여 curved beam의 수치해석 값과 Analytical값을 비교하여 검증하고 드릴 스트링에 hookload와 WOB 경계조건을 주어 각 element 마다 동적 거동을 분석하였다. 실제 궤적을 적용하여 드릴 파이프의 굽힘이나 중력으로 인하여 Wellbore와 접촉되는 부분에 마찰을 적용하였고, 또한 마찰 작용 시 일정한 축 방향 속도를 유지하기 위한 PI제어 값을 설계하여 drillstring 전체의 각속도 변화와 실제 드릴 굴착 작업 중 발생하는 stick slip현상을 관찰하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제6권2호
• /
• pp.245-256
• /
• 2014

I-core sandwich panel that has been used more widely is assembled using high power $CO_2$ laser welding. Kim et al. (2013) proposed a circular cone type heat source model for the T-joint laser welding between face plate and core. It can cover the negative defocus which is commonly adopted in T-joint laser welding to provide deeper penetration. In part I, a volumetric heat source model is proposed and it is verified thorough a comparison of melting zone on the cross section with experiment results. The proposed model can be used for heat transfer analysis and thermal elasto-plastic analysis to predict welding deformation that occurs during laser welding. In terms of computational time, since the thermal elasto-plastic analysis using 3D solid elements is quite time consuming, shell element model with multi-layers have been employed instead. However, the conventional layered approach is not appropriate for the application of heat load at T-Joint. This paper, Part II, suggests a new method to arrange different number of layers for face plate and core in order to impose heat load only to the face plate.