• Korean Journal of Computational Design and Engineering
• /
• v.2 no.2
• /
• pp.122-129
• /
• 1997

Ball rolling blending is a popular technique for blending between parametric surfaces. The ball rolling blend surface is conceptually a trajectory of a ball rolling between two base sufaces. It is constructed by sweeping a circular arc along a ball contact curve pair. Since a ball rolling blend surfaces does not have a polynomial form like a Bezier surface patch, it is impossible to apply this method directly to a commercial CAD/CAM system. In this paper an algorithm is developed to approximate a ball rolling blend surface into Bezier surface patches. Least square method is applied to obtain proper Bezier surface patches under a given tolerance. The Bezier surface patches have degree three or more and guarantee VC1-continuity.

• 유공압시스템학회:학술대회논문집
• /
• 2010.06a
• /
• pp.25-32
• /
• 2010

A geortor type pump is widely used in lubrication and actuator systems. Especially the pump is an essential machine element of an automotive engine to feed lubrication oil and power source of automatic transmission. A gerotor is a planar mechanism consist of a pair of rotor and circular tooth of stator assembly which forms a closed space. However, related industries do not have necessary technology to design and optimize the pump and paid royalties of gerotor profile on an advanced company. Also, gerotor profiles with setting design parameter have not been sufficiently analyzed from a theoretical view. Therefore, it is very difficult for designer to decide the specifications of the gerotor profiles, and calculation and fluctuation of flow rate is not yet confirmed. In this study, theoretical analyses and optimal design of the gerotor profiles have been performed numerical method by mathematical base. An automated design system of the tooth profile has been developed through MATLAB GUI Program considering various design parameters.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.11A
• /
• pp.822-830
• /
• 2009

The spectrum efficiency of mobile communication networks can be improved dramatically adopting multiple antennas technologies. In order to guarantee the licensed rights of primary user (PU), the cognitive radio system should perform in a relatively low interference manner when it gets access to the spectrum of licensed networks. In this paper, we explore a uniformly distributed circular antenna array to implement beamforming algorithm that is accomplished by optimization method at the base station of cognitive radio networks, and therefore we can suppress the interference to PU by steering quite low transmission power toward PU and constructing a narrow beam toward cognitive user (CU). By reducing the constraint number of the optimization problem, we also propose a null steering algorithm that steers rather low radiation power toward PU, while the other areas in the same cell are covered by radiation power except the local area around PU. It is pursued to reduce the computation load and enlarge the capacity of cognitive radio networks extremely. The simulation results demonstrate that the proposed algorithms process superior performance.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.7 no.2
• /
• pp.1-11
• /
• 2003

We suggest a method of $C^2$ surface extension with the aid of well-controlled functions. The extended surface is $C^2$ continuous along the old boundary. The function of the extension surface is obtained by replacing the monomials in the quadratic Taylor polynomial of the given surface-representing function by other functions subject to some boundary conditions. We present several sets of control functions. In order to illustrate our suggestion, it is shown that surfaces with a circular boundary and a square boundary can be extended using several base functions.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.6 no.2
• /
• pp.108-116
• /
• 2011

Non-line-of-sight (NLOS) error is the most common and also a major source of errors in wireless location system. A novel weighting factor (NWF) method is presented in this paper, based on the RSS(Received Signal Strength) measurements, path loss model and Circular Disk of Scatterers Model (CDSM). The proposed positioning method effectively weighted the TOA distance measurements for each Base Station (BS). Simulation results show that the proposed method efficiently weighted the distance measurements and achieve higher localization accuracy than that of Linear Line of Position (LLOP) and Believable Factor Algorithm (BFA).

• International Journal of High-Rise Buildings
• /
• v.9 no.4
• /
• pp.377-386
• /
• 2020

Beginning a few decades ago, Baku, the capital city of Azerbaijan, has experienced a dramatic construction boom that is revitalizing its skyline. The expansive growth looks to uphold the historic past of Baku as a focal point within the Caspian Sea Region while also evoking aspirations for a city of the future. With superstructure complete and interiors progressing, the Ministry of Taxation (MOT) tower is the latest addition to the city, with its stacked cubes twisting above a multi-level podium at the base. Each cube is separated by column-free green roof terraces, creating unique parametric reveals of the developing surroundings. Aside from MOT's stunning shape, its geolocation resulted in unusually high wind loads coupled with high seismic hazards for a tower of its height. In addition, limitations on possible structural systems required stepping away from a typical prescriptive code-based approach into one that utilized Performance-Based Design (PBD) methods. This paper presents the numerous structural challenges and innovations that allowed the design of a new icon to be realized.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.11a
• /
• pp.236-237
• /
• 2021

In the waterproofing of the rooftop of reinforced concrete buildings, it is difficult to solve perfectly according to the proficiency of waterproofing materials, methods, and mechanics. Therefore, this study applies a Tricot Fabric Mesh to the behavior of the bottom concrete. In addition, it responds to the behavior of the concrete cracking, and the waterproofing and protective layer has developed a method to provide convenience for rooftop floor use by adhesion between the base and the waterproof layer with the use of high viscosity urethane to effectively move the surface deformation and surface vapor and install a airvent device on the wall.

• Journal of Species Research
• /
• v.13 no.2
• /
• pp.127-130
• /
• 2024

The first complete mitogenome sequence of the Red-tongue Pit Viper (Gloydius ussuriensis) from Korea was characterized using next-generation sequencing. The mitogenome is a circular molecule (17,209 bp) with a typical vertebrate mitogenome arrangement, which consists of 2 ribosomal RNA genes (rRNA), 22 transfer RNA genes (tRNA), two non-coding regions (D-loop), and 13 protein-coding genes (PCGs). The base composition of the mitogenome is 32.7% of A, 27.5% of C, 13.9% of G, and 25.9% of T, with a slight AT bias(58.6%). This phylogenetic analysis infers that G. ussuriensis is in the same group as the Chinese G. ussuriensis (Accession No. KP262412) and is closely related to G. blomhoffi and other species of the genus Gloydius. In our study, the complete mitogenome sequence of Korean G. ussuriensis was characterized and we provided basic genetic information on this species.

• Journal of architectural history
• /
• v.18 no.6
• /
• pp.103-126
• /
• 2009

This study aims to discover historical trends and change of form of all stupas in India with observation of field study that is as direct as possible, by classifying, analyzing, and synthesizing the stupas. Study of Indian stupa in Korea has a number of shortcomings since only introductory partial approach has been made in order to seek the origin of Korean pagoda. This study also aims to correct errors of stupa terminology in Chinese character committed by misinterpretation of Hindi language which was established by precedent Japanese scholars several decades ago. Piled-up stupas were totally destroyed by pagans, therefore their remains tell us only of structure, material, sizeand disposition. However remains of carved stone at torana and drum give us clues as to the original form of stupa and worshipping activity, as well as change to a more luxurious form. Many rock cave stupas of India show us both simple forms matching the ascetic age of early Buddhism and luxurious changes in Mahayanan era introducing us to statues of Buddha. Indians recovered the spheric form of 'anda,' a Hindi term meaning cosmic egg, from the hemispheric form of the piled-up stupa. Therefore we might discard the erratic term of 'bokbal', which means an upset vessel. Railings and parasols became main factors of stupa design. Carved railings around stupa became a sign of divinity. Serious worshipping activity made drums long or high and created multi-embossed stripes. Bases of circular drums of some cave stupas changed their shapes to rectangular or octagonal. Single parasols became multiparasols of affluent flowerlike curved stems on carved stupa. Multistoried, elongated and high parasols of Gandhara stupas are closely related to such factors as diverse changes of form in Indian subcontinent. Four-sided torana gate and ayaka column of the circular form of original stupas suggest the rectangular form of subsequent East Asian pagoda, and higher and wider base of Indian stupas became the origin of East Asian rectangular pagoda.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.7
• /
• pp.1139-1146
• /
• 2000

In this paper, circular-polarized dipole antenna with a novel structure is designed, simulated and fabricated for PCS or IMT-2000 base station at an arbitrary test frequency(1.575 GHz). Its radiation pattern is analyzed by means of physical optics(PO). The designed antenna is made up of a horizontal and a vertical dipole elements at a height of λ/4 above an reflector. One of λ/4 length vertical dipole element is located at a height of λ/8 above an reflector. In this case, circularly polarized radiation pattern is obtained by making impedance difference due to adjusting the length of each element. The characteristic of antenna measured from this study is that return loss is 18.4 dB, -10 dB bandwidth is 360 MHz(22.8%), 2 dB axial ratio bandwidth is 30 MHz, -3 dB beamwidth is 76$^{\circ}$, 2 dB axial ratio beamwidth is 58$^{\circ}$, axial ratio is 1.7 dB at 1.575 GHz. Radiation pattern is in well agreement with the result of PO.