• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.677-682
• /
• 1998

A Single-phase Active Rectifier (SAR) [4-6] with high power factor capability is adopted to satisfy the international harmonic current standards such as IEC 1000-3-2. To minimize the input current distortion and to apply the control IC, such as FA5331, UC3854, ML4821 and so forth, the new adequate sensing circuits of the input voltage and current are proposed. There are tow methods applicable the SAR to inverter air-conditioner from the viewpoint of both efficiency and cost. The selecting methods of the passive components are presented for the two approaches. Using the determined components, the loss analyses are carried out. The prototype SAR circuits of these two approaches with 3kW power consumption are built and the operation and performance of the circuits with power factor correction capability are verified through the experimental results.

• KIEE International Transactions on Electrophysics and Applications
• /
• 제4C권6호
• /
• pp.255-262
• /
• 2004

In this paper, a number of double-layered microwave integrated circuits (MIC) have been designed and analyzed based on a developed finite-difference time-domain (FDTD) solver. The solver was first validated through comparisons of the computed results with those previously published throughout the literature. Subsequently, various double-layered MIC printed on both isotropic and anisotropic substrates and superstrates, which are frequently encountered in printed circuit boards (PCB), have been designed and analyzed. It was found that in addition to protecting circuits, the added superstrate layer can increase freedoms of design and improve circuit performance, and that the FDTD is indeed a robust and versatile tool for multilayer circuit design.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
• /
• pp.554-557
• /
• 2002

In this paper, PDP driving circuit is designed to show the pattern of still-image with ADS (Address Display Separation) driving method. The designed circuits consist of three stages which are the image processing program, digital logic parts, and power circuits. The Image processing program is designed serial-communication with RS-232C using BASIC language. Digital logic parts design ADS driving signals with Xilinx FPGA and are simulated by ModelSim 5.5f. Power circuits convert output of digital logic parts into high voltage which panel is drived.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제5권2호
• /
• pp.102-107
• /
• 2005

This paper presents the comparison and performance analysis for CPL and CMOS based designs. We have developed the Verilog-HDL codes for the proposed designs and simulated them using ModelSim for verifying the logical correctness and the timing properties of the proposed designs. The proposed designs are then analyzed at the layout level using LASI. The layouts of the proposed designs are simulated in Winspice for timing and power characteristics. The result shows that the new circuits presented consistently consume less power than the conventional design of the same circuits. It can also be seen that these circuits have the lesser propagation delay and thus higher speed than the conventional designs.

• Progress in Superconductivity
• /
• 제9권2호
• /
• pp.157-161
• /
• 2008

Due to high speed operations and ultra low power consumptions RSFQ logic circuit is a very good candidate for future electronic device. The focus of the RSFQ circuit development has been on the advancement of analog-to-digital converters and microprocessors. Recent works on RSFQ ALU development showed the successful operation of an 1-bit block of ALU at 40 GHz. Recently, the study of an RSFQ analog-to-digital converter has been extended to the development of a single chip RF digital receiver. Compared to the voltage logic circuits, RSFQ circuits operate based on the pulse logic. This naturally leads the circuit structure of RSFQ circuit to be pipelined. Delay time on each pipelined stage determines the ultimate operating speed of the circuit. In simulations, a two junction Josephson transmission line's delay time was about 10 ps, a splitter's 14.5 ps, a switch's 13 ps, a half adder's 67 ps. Optimization of the 4-bit ALU circuit has been made with delay time consideration to operate comfortably at 10 GHz or above.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.154-160
• /
• 2007

The experimental system, developed in this research, is a teaching material that trains and practices automobile electric circuit in technical high school. This system consists of a textbook, 15 kinds of instruments and 62 kinds of 'Flash' animations. Textbook includes automobile electric circuits and experimental process. Instruments have 23 kinds of drills. Its is composed of electrical relays, motors, switches, light bulbs, electrical lines and power unit so on. 'Flash' animation displays an electrical current flow on circuits actually. Both Dacum method and ISD skill have been conducted to analysis job and design syllabus. The experimental system have been implemented on technical high school class to evaluate its objectivity and effect. It is expected that this system can contribute to studying of car service.

• 공학교육연구
• /
• 제3권2호
• /
• pp.38-43
• /
• 2000

인터넷을 통한 WWW(World-Wide Web)는 사이버 교육을 위해 새로운 기회를 제공한다. 웹은 다른 네트워크 툴과 조합되어 학습자에게 유용한 교육적 정보를 제공한다. 본 논문에서는 인터넷상에서 전자회로 원리 이해용 애플릿을 개발하여 몇 가지 예제 애플릿을 제시하였다. 이 논문에서 제시된 방식을 가상대학 교육에 적극 활용한다면 가상대학 강좌의 효율성을 크게 증진시킬 수 있으리라 생각된다.

• 센서학회지
• /
• 제26권4호
• /
• pp.292-296
• /
• 2017

It has become ever harder to design reliable circuits with each nanometer technology node under normal operation conditions, a transistor device can be affected by various aging effects resulting in performance degradation and eventually design failure. The reliability (aging) effect has traditionally been the area of process engineers. However, in the future, even the smallest of variations can slow down a transistor's switching speed, and an aging device may not perform adequately at a very low voltage. Because of such dilemmas, the transistor aging is emerging as a circuit designer's problem. Therefore, in this paper, the impact of aging effects on the delay and power dissipation of digital circuits by using nanomneter MOSFET power gating structure has been analyzed.. Based on this analyzed aging models, a reliable digital circuits can be designed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.692-696
• /
• 2005

In an attempt to fabricate all inclusive display systems we are presenting a study on several elements that would be used as building blocks for all-on-board integrated applications on stainless steel foils. These systems would include in the same substrate all or many of the components needed to drive a flat panel OLED display. We are reporting results on both digital and analog circuits on stainless steel foils. Shift registers running at speeds greater than 1.0MHz are shown as well as oscillators operating at over 40MHz. Pixel circuits for driving organic light emitting diodes are presented. The device technology of choice is that based on poly-silicon TFT technology as it has the potential of producing circuits with good performance and considerable cost savings over the established processes on quartz or glass substrates (amorphous Silicon a-Si:H or silicon on Insulator SOI).

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.