• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.11a
• /
• pp.302-303
• /
• 2010

본 논문에서는 고속으로 홀로그램을 생성하기 위해 새로운 컴퓨터 생성 홀로그램(computer-generated hologram, CGH) 수식을 제안하고, 셀 기반의 VLSI(very large scale integrated circuit) 구조를 제안하였다. 기본 CGH 수식에서 가로 또는 세로 방향의 연산 규칙을 찾아낸 후 가로 또는 세로 방향의 홀로그램 화소를 병렬적으로 구할 수 있는 수식을 유도하였다. 제안한 수식을 바탕으로 초기 파라미터 연산기(initial parameter calculator)와 업데이트-위상 연산기(update-phase calculator)로 구성된 CGH 셀의 구조를 제안하고 하드웨어로 구현하였다. 수식의 변형을 통해서 하드웨어를 간략화 시킬 수 있었고, CGH의 확장을 통해 가로 방향으로 병렬화시킬 수 있는 하드웨어 구조도 보였다. 실험에서는 하드웨어에 사용된 자원을 분석하였다. CGH 커널과 프로세서의 구조는 이전 연구에서 사용된 플랫폼을 그대로 사용하였다.

• Transactions of The Korea Fluid Power Systems Society
• /
• v.8 no.4
• /
• pp.24-31
• /
• 2011

Double-color Injection molding machine is the assembly of many kinds of mechanical, fluid power part and electric electronic control system. From in these, fluid power is a part where becomes the first core of this machine. Fluid power systems of double-color injection molding machine are modelled and analyzed using a commercial program AMESim. Partial system models which is divided according to functional operation are made and its analysis results shows how design parameters work on operational characteristics like pressure, flow rates, displacement at each node and so on. Analysis modeling and compared the data which gets from experiment and the analysis result which has a reliability got data. The results made by analysis will be used design of fluid power circuit for developing a double-color injection molding machine.

• Proceedings of the IEEK Conference
• /
• 2004.06b
• /
• pp.347-350
• /
• 2004

The substrate parameters of Si MOSFET equivalent circuit model were directly extracted from measured S-Parameters in the GHz region by using simple 2-port parameter equations. Using the above extract ion method, bias and gate length dependent curves of substrate parameters in the RF region are obtained by varying drain voltage at several short channel devices with various gate lengths. These extract ion data will greatly contribute to scalable RF nonlinear substrate modeling.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.675-678
• /
• 2005

An improved BSIM3v3 RF Macro model with RC parallel substrate circuit has been developed to simulate RF characteristics of the output admittance in MOSFET accurately. This improved model shows better agreements with measured $Y_{22}-parameter$ up to 10 GHz than conventional one with a single substrate resistance, verifying the accuracy of the improved one.

• Proceedings of the KIPE Conference
• /
• 2016.07a
• /
• pp.30-31
• /
• 2016

본 논문에서는 무선 전력 전송 컨버터의 공진 회로 임피던스 구조를 분석하여 컨버터의 입출력 전압 이득 및 1, 2차 전류 값을 기술한다. 이 때 물리적으로 떨어진 1차 측과 2차 측의 전력 유실 현상을 무선 전력 전송 코일 네트워크 간 Scattering Parameter를 이용하여 계산한다. 또한, 수학적 계산결과를 바탕으로 무선 전력 전송 컨버터 손실의 대부분을 차지하는 도통 손실 및 스위칭 손실을 수학적으로 계산하여 예측한다. 무선 전력 전송 컨버터의 손실 분석 결과를 토대로 주어진 컨버터 동작 상황에서의 효율을 예측하고 이를 실험적으로 검증하고자 한다.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.10 no.6
• /
• pp.11-24
• /
• 1973

A new simple technique for 2-terminal negative resistance cireait analysis and synthesis is developed, by using the equivalent e.m.f. defined as a function of input lotage or current variation. The technique is applied to design 2-terminal junction transistor negative resistance circuits based on the parameter control method. Modeling circuits for SCR, GTO-SCR and SSS are also derived from the proposed transistor negative resistance circuits, and the merits of the modeling circuits are discussed.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.54 no.3
• /
• pp.148-154
• /
• 2005

Various methods for analyze optical components which are necessary before the fabrication of optical circuit component and as its applications, designing method of Wavelength Division Multiplexer(WDM) filter using arrayed-waveguide grating(AWG) is paper. In the case of analyzing uniform optical waveguide, effective index method(EIM), harmonic expansion method are used, and in the case of non-uniform optical waveguide, beam propagation method(BPM) are used. In this paper, to use arrayed-waveguide grating as WDM filter of centered wavelength of $1.55{\mu}m$ and wavelength spacing of 0.8nm, all of the parameter of AWG is calculated by the HEM and the BPM using EIM. As a result of calculation, free spectral range is 12.8nm, focal length $9336.55{\mu}m$, path difference $129.36{\mu}m$ and the number of slab waveguide 91 when the distance of core center to center on row land circle is $20{\mu}m$.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.166-168
• /
• 1996

Since interior permanent magnet synchronous motor(IPMSM) has a structure whose magnet is inserted in the rotor, d, q inductances are differ from each other and the motor produces hybrid torque combined allignment term and reluctance term. But, for their complex magnetic path, it is difficult to analyze this type motors by equivalent magnetic circuit method. So, in this paper, the variation of parameters of IPMSM according to the magnet thickness accuired by using the result from finite element method is presented for the sake of effective design process.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.187-189
• /
• 1996

In this paper, we have studied several operating characteristics through the analysis of system. First, we have constituted the equivalent circuit to analyze the operating characteristics of rotating type of superconducting power supply and have induced the optimal design parameter. The computer simulation have showed that the pumping current is in proportion to the area of the pole and rotor speed, and is inverse proportion to the magnitude of load. Therefore, to acquire maximum pumping current we must design the power supply system with maximum area of the pole and minimum inductance of the load.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.304-307
• /
• 2003

Usually, the thrust of a Linear Pulse Motor(LPM) is calculated by magnetic equivalent circuit modelling method. Analytical thrust deviation exists to calculating magnetic flux density by using Permeance Modelling Method, Finite Element Method, and Velocity Electric Motive Force method. For calculating accuracy thrust by using these every method, tire thrust is calculated and compared by Lorentz Force method, Magnetic coenergy Method, and Maxwell correspondence forte Method. And that becomes Important factor at the comparison of each capacity and parameter of motor. So this study wants to compare and analyze measurement data and calculating data of the static thrust of LPM. and then we can get more accuracy method, calculating the static thrust of LPM.