• 대한화학회지
• /
• 제28권2호
• /
• pp.135-142
• /
• 1984

초과산화이온$(O_2^-)$의 발생원으로서 $KNO_2$를 사용하여 새로운 형태의 산착화합물가교팔라듐착화합물을 합성했다. 이 방법은 구핵치환과 전자 이동에 의한 반응으로서, 저원자가전이금속착화합물에 산소분자를 산화적으로 부가시켜 합성한 종전의 방법과는 완전히 다르다. $O_2^-$에 의하여 {\pi}$-알릴리간드를 갖는 새로운 형태의 5가지 산소가교팔라듐착화합물을 합성했다

• 한국생산제조학회지
• /
• 제5권2호
• /
• pp.63-72
• /
• 1996

In order to regulate the cutting force at a desired level during peripheral end milling processes a feedrate override Adaptive Control Constraint (ACC) system was developed. The feedrate override function was accomplished through a development of programmable machine controller (PMC) interface technique on the NC controller, Nonlinear model of the cutting process was linearized as an adaptive model with a time varying process parameter. An integral type estimator was introduced for on-line estimation of the cutting process parameter, Zero order hold digital control methodology which uses pole-assignment concept for tuning of PI controllers was applied for the ACC system. Performance of the ACC system wsa confirmed on the vertical machining center equipped with fanuc OMC through a large amount of experiment.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2005년도 춘계학술대회논문집
• /
• pp.265-269
• /
• 2005

본 논문에서는 최대 견인력 제어를 위해서 최소 차원 부하 토크 외란 관측기를 이용하여 점착력 계수를 추정하고 추정한 점착력 계수의 미분치를 PI 토크 제어하는 Anti-slip제어를 제안한다. 최소차원 부하 토크 외란 관측기는 회전자의 위치 정보와 토크 전류의 정보를 이용하여 부하 외란토크를 추정하고, 부하 외란 토크에 철도차량 상수를 이용하여 점착력 계수를 추정한다. 또한 부하토크외란 관측기는 구조가 간단하며, 시스템의 외란 및 각종 제어이득, 시스템의 상수 변화에 대해서도 견실한 견인력 제어 특성을 가지고 있다. 이와 같은 시스템의 모델링과 전동기 토크에 대한 회전자의 위치 정보를 이용하여 최소차원 부하 토크 외란 관측기의 상태변수인 점착력 계수를 추정하고, 추정한 점착력 계수의 미분치를 PI토크 Anti-Slip제어하여, 최대 견인력 제어가 되도록 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 D
• /
• pp.682-685
• /
• 2000

In this paper, Using CDM(Coefficient Diagram Method), we set target polynomial constraints and design 4-PID controller which have different structures such as Textbook PID-controller, Derivative of output PID-controller, set point of I only controller(I-PD controller) and PI controller followed by lag network(PI lag network controller) were tested by simulations. The plant we used are that used in IFAC 93 benchmark test. A controller designer, using CDM could use these results to select the controller's structure which is the best one fer him.

• 전기학회논문지P
• /
• 제51권3호
• /
• pp.111-119
• /
• 2002

This paper proposes a speed control system based on a fuzzy logic approach, integrated with a simple and effective adaptive algorithms. And this paper attempts to provide a thorough comparative insight into the behavior of induction motor drive with PI, direct and improved fuzzy speed controller. A indirect vector controlled induction motor is simulated under varying operating condition. The validity of the comparative results is confirmed by simulation results for induction motor drive system.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1992년도 추계학술발표강연 및 논문개요집
• /
• pp.6-6
• /
• 1992

Ionized cluster beam deposition (ICBD) technique has been employed to fabricate high-purity crystalline polyimide (PI) film. The pyromellitic dianhydride (PMDA) and oxydianiline (ODA) were deposited using dual ICB sources, Fourier trans forminfraredspectroscopy (FT-IR), X-ray photoemission spectroscopy (XPS), and Transmission electron microscopy (TEM)study show that the bulk and surface chemical properties and the crystalline structure are very sensitive to the ICBD conditions such as cluster ion acceleration voltage and ionization voltage, At optimum ICBD conditions, the PI films have a maximum imidization, negligible impurities(∼1% isoimide), and a good crystalline structure probably due to the high surface migration energy and surface cleaning effect. These characteristics are superior to those of films deposited by other techniques such as colvent cast, vapowr deposition, or sputtering techniques.

• 한국정밀공학회지
• /
• 제17권9호
• /
• pp.95-101
• /
• 2000

This paper proposes a general structure observer and shows the characteristic of external noise reduction in linear discrete system. First we propose a simple genera structured observer which includes high gain term or PI(proportional integral) term to eatimate the states of system and show that the observer can estimate the states of system even if an external noise is added to the system's output. An existence condition of the observer is derived and checked by system's rank condition. Through a numerical example we can verify that the proposed observer is effective to estimate the state of system with external noise compared to that of conventional high gain observer.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2008년도 춘계학술대회 논문집
• /
• pp.395-398
• /
• 2008

Interior permanent magnet synchronous motor(IPMSM) has become a popular choice in electric vehicle applications, due to their excellent power to weight ratio. In order to maximize the efficiency in such applications, this paper proposes the FNN(Fuzzy Neural-Network)-Pl controller. The controllable electrical loss which consists of the copper loss and the iron loss can be minimized by the error back propagation algorithm(EBPA). This paper considers the parameter variation about the motor operation. The operating characteristics controlled by efficiency optimization control are examined in detail.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 하계학술대회 논문집
• /
• pp.520-521
• /
• 2010

본 논문은 군사용 미사일의 조립 후 성능 검증을 위한 Missile Assembly Test System(MATS)용 IPMSM의 위치 제어 방법을 구현하였다. 이를 위하여 슬라이딩 모드 제어기와 PI 제어기를 Membership 함수를 사용하여 혼합한 개선된 위치제어 알고리즘을 제안하였다. 오버슈트가 없고, 외란에 대하여 강인하게 운전 궤적을 추정하는 특성이 뛰어난 슬라이딩 모드 제어의 장점과, 빠른 제어 응답성과 정상상태에서 리플이 적은 PI제어를 적절하게 혼합하였고, 이를 시뮬레이션을 통하여 IPMSM의 위치제어 성능을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.403-405
• /
• 1999

The model reference adaptive control(MRAC) algorithm is applied to the speed control of an inverter driven permanent magnet brushless do motor MRAC is compared to a standard PI controller. Applying this algorithm has also been proved by simulations that quick speed response without over-shoot could be obtained for the motor system with variable parameters. Simulation results show that the adaptive controller is superior to the PI controller.