• Journal of Conservation Science
• /
• v.37 no.1
• /
• pp.63-76
• /
• 2021

The purpose of this study is to scientifically analyze physicochemical characteristics of the roof tiles used for palaces in the Joseon Dynasty which stored in Changdeokgung material storage and Seooreung Jaesil and the modern handmade ones which made by N company to understand the differences between their manufacturing techniques. Through chromaticity, cross-sectional observation, component analysis, and crystal structure analysis, it was possible to confirm the physicochemical properties and fired properties of the roof tile. Roof tiles from the Joseon Dynasty have a wider colorimetric range and higher apparent porosity and water absorption, on average, than the modern roof tiles. The cross section of the Joseon Dynasty roof tiles shows that most clay minerals have not been vitrified, remaining in the form of atypical particles, while the modern roof tiles have denser clay materials. X-ray diffraction analysis identified low-temperature minerals such as micas in Joseon roof tiles but no peak of these minerals was observed in the modern roof tiles, implying that the modern ones are fired at higher temperature than the Joseon ones. Therefore, the modern roof tiles are fired at higher temperature and have higher density than the Joseon ones due to the use of pugmills. The general content of main ingredients was similar between the two. Additionally, the principal component analysis of trace elements in the Joseon roof tiles showed that most samples were from similar areas. It seems that the Joseon roof tiles were manufactured using soils supplied from a specific region at the same timeframe and their consistency in the content of principal components implies that they also have similar mix proportions of clay.

• Culinary science and hospitality research
• /
• v.20 no.2
• /
• pp.89-99
• /
• 2014

This study aims to make stock using cod bones with the hot water extraction method. Moisture content, chromaticity, pH, salinity, sugar content, mineral contents, quantitative analysis, and overall acceptance were studied to determine the standard formula. The results are as follows. The moisture content decreased (p < 0.001) and color value increased as heating time increased. The pH was highest in CS5 which was heated for 30 minutes and lowest in CS1. The salinity and sugar content significantly increased with more heating time (p < 0.001). In terms of mineral contents, sodium was highest in 138.87~154.17 mg, magnesium and iron showed proportion difference with increased heating time. The mineral analysis test result revealed that sodium, magnesium and iron showed proportional difference with increased heating time, while potassium and calcium did not change. The result of quantitative analysis test showed transparency, fishy smell, delicate flavor, savory flavor, salt taste and umami taste became stronger as high-pressure heating time increased. From these result, CS4 was evaluated to be the best in appearance, flavor, taste, aftertest and overall acceptance. Also, 60 minute high-pressure heating time is the most desirable to produce stock using cod bones as a main ingredient.

• Journal of Conservation Science
• /
• v.35 no.6
• /
• pp.612-620
• /
• 2019

A woolen tapestry curtain, owned by the Seoul Museum of Craft Art, is composed of tabby by cotton-warp and wool-weft threads and its patterned part is shown as a tapestry; paint with pigment has been added to it. The chromaticity of this curtain was measured and the substances in the deep red color were confirmed as Hg by an analysis of the ingredients through X-ray fluorescence. This is presumed to be cinnabar or vermilion. Analyses were performed on a total of seven fabric samples, including the warp & weft of the fabric, its trimming, and its back fabric. As a result, the warp of the woolen tapestry curtain was determined to be a cotton fiber with a middle hole or lumen in the cross-section. Furthermore, an infrared peak likewise showed O-H and C-O binding. Wool fibers as wefts were identified with circular and oval cross-sections and IR peaks showed N-H/O-H stretching and amide(-CONH-). The animal hair samples used in the wool fiber are believed to have come from long-tailed goral or goats and the possibility of using easy-to-spin sapsal dog hair is also not to be overlooked. This was determined through a contrast analysis by the Cultural Heritage Administration to identify the animal species used in the tapestry.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.3
• /
• pp.326-344
• /
• 2020

Laccase was applied to improve the drying speed of urushi lacquer to confirm a potential use of laccase as an enzyme additive. As a result of applying laccase of lacquer and white-rot fungi, drying times for both Korean and Chinese specimens were reduced. All of the specimens to which laccase was applied were dried(set to touch) within 60 minutes from the start of the drying, and the drying rate was improved as the content ratio of laccase increased. In addition, although there were differences in hardening drying time between Korean and Chinese lacquers, it was confirmed that hardening drying took place even at room with temperature of 20 ± 2 ℃ and humidity of 55-60%. As a result of lacquer layer analysis of the dried specimens, the drying speed was improved when the content ratio of laccase to urushiol was 5:1, and there were no differences in chromaticity and adhesion, confirmed that the layers were stable. It was observed that the gloss of both Korean and Chinese lacquers were reduced when laccase was applied. However, according to the analysis of FT-IR and Py-GC/MS, the changes in components were not as sufficient to affect the physical properties. Thus, its applicability as an additive was confirmed.

• Applied Chemistry for Engineering
• /
• v.28 no.3
• /
• pp.345-350
• /
• 2017

The sintered density of uranium oxide pellets for pressurized water reactors is generally analyzed with pellet's samples completed with the sintering process. In this paper, the sintered density was analyzed by the newly developed method measuring the chromatography of ammonium diuranate, a precursor of uranium oxide, by a spectrophotometer (CM-5, Konica Minolta) before completing the sintering process. As a result of the sintered density analysis based on the brightness, color coordinate values (L, a, b) obtained from five ammonium diuranate samples by a spectrophotometer and the trend line of sintered density analyzed by a previous method, the sintered density with respect to the L value was observed with 0.9967 of the decision factor $R^2$. In case of a value, $R^2$ value was 0.9534 indicating lower reliability than that of the L value. However, b value with $R^2$ value of 0.4349 showed a very low correlation.

• Journal of Conservation Science
• /
• v.28 no.2
• /
• pp.153-164
• /
• 2012

The major petroglyphs of Bangudae site were composed mainly of hornfelsed shale. Surface of the rock was formed weathering layer (average porosity 25%) that discriminated mineral and chemical composition against fresh rock (average porosity 0.4%). The lost area of major petroglyphs in the past up images carved to the present was calculated about 23.8%. And occurrence area of exfoliation indicated 1.2% of the whole petroglyphs. As a result of the chromaticity analysis, color of the major petroglyphs was changed brighter and yellower than fresh rock by chemical and biological weathering factors. Average ultrasonic velocity of petroglyphs was measured 2,865m/s. This result indicated that ultrasonic velocity decreased especially bottom of petroglyphs than measured result in 2003 year. The results of the evaluation for slope stability, it identified the possibility of toppling, planar and wedge failure in host rock. The 3D image analysis and modeling data of the cavern obtained for structural reinforcement.

• Culinary science and hospitality research
• /
• v.17 no.2
• /
• pp.209-220
• /
• 2011

This research intends to research on the optimal cooking techniques by adding perilla leaves to raw noodles, in which it has various effects and functions in sterilization. The water content measured in the dough added with raw perilla leaf juice came out high as more perilla leaves were added. More freeze-dried perilla leaf powder decreased water content. The pH of the dough increased significantly as the added ingredients increased with significant differences among the samples. The chromaticity of the dough deliberately decreased in both a and b as the amount of raw perilla leaves in dough increased. The L value of raw noodles with freeze-dried perilla leaves tended to decrease as more ingredients were added. The result of the RVA analysis on the dough with raw perilla leaves showed that the gluten decreased with more raw perilla leaves added. The result of the RVA analysis on the dough with freeze-dried perilla leaf powder indicated that the initial pasting tempo tended to increase significantly with more powder added except for 5% and 7% of powder added with no significant difference. The values dropped as the freeze-dried powder was added Minimum viscosity tended to decrease definitely as more freeze-dried perilla leaf powder was added. The dough's measurement results of WRC showed that water absorbing power of both dough with raw perilla leaves and that with freeze-dried perilla leaf powder reduced significantly as more perilla leaf powder were added.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.567-573
• /
• 2012

Compared with the natural marble, the artificial marble has the advantages of excellent appearance, high degree of finish, even color, fine pressure and wear resistance, bear erosion and weathering, etc. It can be widely used in kitchen countertops, bath vanity tops, table tops, furniture, reception desks, etc. However, large amounts of artificial marble waste such as scraps or dust have been generated from sawing and polishing processes in artificial marble industry. Waste from artificial marble industry is increasing according to demand magnification of luxurious interior material. Artificial marble wastes can be recycled as aluminum oxide used as raw materials in electronic materials, ceramics production, etc., and methyl methacrylate(MMA) which become a raw material of artificial marble by pulverization, pyrolysis and distillation processes. The characteristics of artificial marble wastes was analyzed by using TGA/DSC and element analysis. Crude aluminum oxide was obtained from artificial marble waste by pulverization and thermal decomposition under nitrogen atmosphere. In this work, Box-Behnken design was used to optimize the pyrolysis process. The characteristics of crude aluminum oxide was evaluated by chromaticity analysis, element analysis, and surface area.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.201-216
• /
• 2022

Materials and techniques used for two portraits (Jo-nyeon Lee and S ung-in Lee) of the Lee family from Seongju enshrined in Seongsan temple were scientifically analyzed, and based on the data, an optimal replica restoration method was designed. According to the expression technique investigation, both portraits were expressed mainly in line drawing, but there were differences in shoes, pupils, the color expression of flesh, overpainting, and traces of reinforcement. Pigment analysis revealed that a mixture of cinnabar and minium, organic pigment, azurite, malachite, lead white, and yellow pigment were used in common. In the case of Sung-in Lee's portrait, seokganju and atacamite were also used. In addition, comparison with the contemporaneous portraits of gentry showed that the portrait style at the time was found in the two portraits, but the singularity was modified differently there. Based on the scientific analysis, it was decided to replicate the old color restoration for Jo-nyeon Lee's portrait while for Sung-in Lee's portrait, it was decided to replicate the phenomenon. Detailed coloring techniques were presented by supplementing the expression techniques that are difficult to confirm visually using scientific data. In addition, by measuring the chromaticity of representative positions in the portrait for each color and presenting the color reference value calculated as the average value, the current color of the artifact can be replicated and restored based on the objective data as much as possible.

• Journal of Conservation Science
• /
• v.25 no.4
• /
• pp.439-450
• /
• 2009

The purpose of this study is to find out characteristics of the fillers made by epoxy resin (L-30) and filling epoxy resin (L-50) with talc, quartz sand and wollastonite with different mixture ratio of 5%, 50%, 80%, 120%, and 150%. The viscometer and colorimeter were used to measure the viscosity and chromaticity of the fillers. Additionally, IC and SEM were used to reveal characteristics of the filler, and checked ultrasonic wave velocity, compressive strength and contact angle to estimate the stability between the filler and stones which are essential for conservation treatments. The filler mixed with the talc had the lowest value in the ultrasonic wave velocity analysis, and its compressive strength decreased as the mixing rate of talc increased. On the other hand, wollastonite had higher values than others in the ultrasonic wave velocity and the compressive strength regardless of epoxy resin type, also, these values increased as mixing rate increased. The properties of the filler, which include the granularity and shape, have influence on characteristics of the stone conservation adhesives. Thus, the filler type, characteristic, and mixture ratio must be considered for effective conservation treatment.