• Elastomers and Composites
• /
• v.29 no.1
• /
• pp.18-29
• /
• 1994

The purpose of this study is to investigate reinforced effect between silica treated by coupling agents and rubber matrix under the configuration chemical bonds, and the effect of silica particles coated by organic polymers using aluminum chloride as the catalyst. In vulcanization characteristies were tested by Curastometer. The M-series vulcanizates were reached to the fastest optimum cure $time(t_{90})$ and R-series vulcanizates with the same formula had the shorted optimum cure times. Tensile characteristics measuring with a tensile tester revealed that the M-series vulcanizate was the best in the physical properties, such as tensile strength. In 100% modulus, however, the S-series vulcanizates appeared to be better than the other vulcanizates. Also, hardness showed the following order : S-series>R-series>M-series with the order of elongation R-series>M-series>S-series. In SEM test, shapes of chemical treated silicas were observed. The dispersion of filler in the SBR composite appeard uniformly. In RDS test for the dynamic characteristics, G' indicates that S-3 shows the highest value with the next order M-3>R-3, and the order of damping values are as followe: M-3>M-3>R-3.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.38 no.4
• /
• pp.37-44
• /
• 2001

The experimental results and application potentials of a ZVS Forward DC-DC converter based coreless PCB transformer and coreless inductor are presented. The experimental converter, that has a maximum power of 12W, maximum switching frequency of 2.2MHz and nominal input voltage of 24V, has been successfully implemented. The coreless PCB transformer and inductor are found to have many favorable characteristics to high frequency operations due to the absence of a core loss. A power conversion efficiency of the experimental converter was measured at 70${\sim}$80%, and the output was regulated at 12V within 0.7% tolerance.

• Journal of Environmental Science International
• /
• v.12 no.2
• /
• pp.171-177
• /
• 2003

This study gives prospects and tasks for the development of Korean herb industries and suggests as follows; There are some preconditions to be considered for the applications of functional traits of herbs and the effect of the profits when herb garden are promoted in Korea later. To activate Korean herb industries, the development of Korean unique herbs and aromatherapies should be settled down with training of specialists to reconcile the health, the beauty and interiors using herbs with human everyday lift in Korea and the effects of economic benefits should be reconsidered with the activation of processing industries by developing the competitive goods from natural plants outside. To continue the development of Korean herb industries, some businesses should be executed step by step like the expansion of recognition far herbs, the promotion of the bases for the herb industry development and the increase of earnings with using herbs while the industrial-educational cooperation system are built and the settlement of the herb industries should be promoted with systematic devices for those systems preceded.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.32 no.5
• /
• pp.35-42
• /
• 2004

This study examines the traffic noise reduction effects of the diverse efficiency features of a sunken square, and investigates the reduction effects and characteristics of noise alterations according to the construction conditions in order to verify its possibility as a new noise reduction facility. The measured data were analyzed. As a result, (1) the traffic noise from the roads around the sunken squares exceeded the regulatory standards; (2) the sunken squares were protected from noise; (3) the sunken spaces yielded a greater reduction by 6∼7dB than the flat ground thanks to the diffraction effect; and (4) there were fine changes to noise according to the conditions of space construction. In short, a sunken square has the potential to afford new applications as a noise reduction facility in a highly concentrated downtown with the existing defects solved. In addition, its use for effective noise control is evident based on the noise characteristics of a space. Future studies need to include efforts to provide clearer quantitative data, as well as research on shape, layout, and materials.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.16-26
• /
• 1999

Five soil mixture with seven turfgrass species when placed over a plastic sheet were evaluated for influence on covering rate, visual rating, visual color and sad development. The result were as follows. 1. The last covering rate was high on sand+bark and on Kentucky bluegrass, respectively while the early covering rate was high on sand+peat and on perennial ryegrass and tall fescue. respectively. 2. Both sand and sand+sandy loam caused poor effects on the covering rate and the visual rating. 3. The early growth was good on perennial ryegrass but the covering rate and the visual rating gradually turned poor because of summer drought. 4. Visual color was high on sand+bark and on Kentucky bluegrass, respectively. 5. Covering rate, visual rating and visual color was best evaluated on Kentucky bluegrass during winter. 6. Sad was highly developed on sand+bark and sand+peat as compared with on the other soil mixture. 7. The carpet-type sad was best developed on Kentucky bluegrass.

• Fashion & Textile Research Journal
• /
• v.6 no.5
• /
• pp.648-654
• /
• 2004

The purpose of this study was to develops of brassiere pattern for middle school students (15 ages ${\mp}$ 3). In order to design a brassiere pattern, the body surface shell was used as the basic pattern. The foundation pattern and the four-piece brassiere pattern with wire were designed and sewed. The results of this study can be summarized as follows. 1. The foundation pattern of the size 75A was proved proper for the body by the wearing tests. Each angle and length of the parts on the base line of the breasts played an important role on setting the pattern. 2. As based on the body surface shell extracted from a plaster mold, the cups of brassiere pattern were applied to the body surface shell, and full side stretch -wings were applied to 8% reduced body size. 3. As the result of the wearing test, the excellence of the experimental brassiere was recognized objectively, with high marks in all the items of clothing compensation, body motion, clothing pressure and breasts growth. The experimental brassiere was covering the whole breasts to cope with change according to breasts growth, It was designed to support the breasts firmly, not to press the middle part of them. Simultaneously, this has the advantages that satisfy a characteristic of a figure and the purpose of putting it on.

• Progress in Superconductivity
• /
• v.3 no.1
• /
• pp.49-55
• /
• 2001

Josephson junction arrays were fabricated by DC magnetron sputtering, self-aligning and reactive ion etching technique. The Al native oxide, formed by thermal oxidation, was used as the tunneling barrier of Nb/$Al-A1_2$$O_3$Nb trilayer. The arrays have 2,000 Josephson junctions with the area of $14\mu\textrm{m}$ $\times$ $46\mu\textrm{m}$. The gap voltages were in the range of 2.5 ~2.6 mV and the spread of critical current was $\pm$11~14%. When operated at 70~94 ㎓, the arrays generated zero-crossing steps up to 2.1~2.4 V. To improve transmission of microwave power and prevent diffusion of oxygen into Nb ground-plane while depositing $SiO_2$dielectric, we applied a plasma nitridation process to the Nb ground-plane. The microwave power was well propagated in Josephson junction arrays with nitridation. The difference in microwave transmission 7an be interpreted by the surface impedance change depending on nitridation.

• Applied Microscopy
• /
• v.27 no.4
• /
• pp.417-432
• /
• 1997

The structures of the fertilized egg envelope in three species of cichlidae, golden severum (Cichlasoma severum var.), convic cichlid (Cichlasoma nigrofasciatum) and discus (Symphysodon aequifasciatus) were investigated by routine light and electron microscopies. The fertilized eggs of all three species were of the non-transparent, ellipsoidal, adhesive and non-floted type. The egg envelopes have a single micropyle, which is thought to the pathway of sperm in the area of the animal pole. In golden severum, an outer surface of egg envelope was covered by a reticular layer, that of convic cichlid was covered by an amorphous reticular layer and that of discus was covered by a branched reticular layer. The fertilized egg envelopes consisted of two distinct layers, an adhesive outer layer and an inner layer, consisted of lamellae alternating with interlamellae of lower electron density, in all three species; an inner layer of golden severum was $15\sim17$ layers, that of convic cichlid was $14\sim16$ layers, and that of discus was $18\sim19$ layers.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.28 no.4
• /
• pp.69-78
• /
• 2005

RFID is a technique that plays an important role in identifying and tracking the movement of objects by inserting small chips in objects. It is somewhat similar to bar codes from the various points of applications, but is hopefully considered to lead to tremendous development by solving the present drawbacks of bar codes such as slow identification. Speed, low rate of identification, limitation on the distance of identification and on the amount of saving capacity. Through the development of RFID technique, revolutionary growth is anticipated in the area of logistics and commodity distributional systems. Futhermore, the self processing RFID makes the communications between man and objects possible, and through which introduction of ubiquitous atmosphere will be accelerated. Therefore RFID is considered as one of the most attracting area of investment by developed countries as well as Korea. In this paper, we analyze the world wide tendency on RFID, and propose the conditions for activating RFID industry and also suggest directions for national strategy for diffusing RFID.

• Journal of the Korean Chemical Society
• /
• v.36 no.1
• /
• pp.75-80
• /
• 1992

The electrochemical spectral sensitization of a $SnO_2$ electrode with eosin B, a Xanthene dye, has been studied in acetonitrile. Measurements of the photocurrent have been carried out in the presence of supersensitizers such as thiourea, 1-allyl-2-thiourea, NaSCN, and NaI. The magnitude of the supersensitized photocurrent was greater than that of the sensitized photocurrent for all of the supersensitizers studied. However, the long time span of irradiation causes a significant decrease of the supersensitized photocurrent as well as the absorbance. These results, together with infrared spectra and fluorescence spectra, are taken into account to elucidate the mechanism of photoreaction between eosin B and supersensitizers in acetonitrile.