• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.2045_2046
• /
• 2009

광역상수도관에 대하여 외면부식직접평가(ECDA)를 실시하였다. ECDA평가는 과거 방식이력 등에 대한 사전검사, CIPS-DCVG-비저항 측정의 3단계 간접검사를 통해서 배관의 부식가능성이 큰 지점을 검출하여 위험성 우선순위를 판정하고 최종적으로 굴착을 통한 직접 검사 우선순위를 선정하였다. 직접 검사후 사후단계로 수집한 모든 데이터를 종합적으로 분석하여 검사구간의 건전성을 종합 평가를 하였다. 이러한 검사기법을 도입함으로써 배관의 부식위험지역을 파악하고 적절한 조치를 취할 수 있는 체계적인 근거를 마련한 것으로 판단하였다.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2783-2786
• /
• 2005

본 논문은 레이저 비젼 센서를 이용하여 측정 대상의 3차인 위치 정보를 측정하기 위한 방법을 제안하였으며, 이를 이용한 측정 시스템을 개발하였다. 레이저센서는 물체의 평면방정식을 찾기 위해 사용되었으며, 측정된 물체의 평면의 방정식과 Camera를 이용한 물체 위치 정보와 함께 측정 대상의 3차원 정보를 얻는다. 이러한 고정밀 고속 계측을 위한 레이저 모듈 및 소프트웨어를 개발하고 전용 JIG장치에 의하여 측정하던 방식을 Robot과 Laser Vision Sensor를 이용하여 자동으로 측정하는 시스템을 구현하였다.

• Archives of Reconstructive Microsurgery
• /
• v.17 no.1
• /
• pp.51-54
• /
• 2008

We experienced a case of 49-year-old male patient with amputated two fingers preserved in Soju (Korean traditional liquor, a kind of alcoholic beverages). The amputation level of the two fingers was at the distal interphalangeal joint. The Soju was not an adequate physiologic solution for preserving the amputated tissues. Even though arterial anastomosis was successful, there was no venous drainage visible in the operative field. On the first day after the initial operation, we succeeded in the anastomosis of one vein in one of the two amputated fingers. This was 12 hours after arterial anastomosis was carried out. But no venous dranage was visible in the other finger. In spite of a salvage procedure sustained with external bleeding for 7 days, this replanted fingertip eventually fell into necrosis.

• Earthquakes and Structures
• /
• v.6 no.3
• /
• pp.237-250
• /
• 2014

This paper experimentally investigates the seismic performance of RC columns retrofitted with Super Reinforcement with Flexibility (SRF), which is a polyester fiber reinforced polymer. A total of three specimens with a scale factor of 1/2 were constructed and tested in order to assess the structural behavior of the retrofitted RC columns. One specimen was a non-seismically designed column without any retrofit, while others were retrofitted with either one or two layers of the polyester belt with urethane as the adhesive. Static cyclic testing with a constant axial load was conducted to assess the seismic performance of the retrofitted RC columns. It is concluded that the SRF retrofitting method increases the strength and ductility of the RC columns and can also impact on the failure mode of the columns.

• Journal of Industrial Technology
• /
• v.27 no.A
• /
• pp.69-76
• /
• 2007

The body of an excavator, one sort of the construction equipment, consists of mainframe part, track frame part, boom part and arm part. The all parts are manufactured in the body welding operation. The scheduling in the body welding operation of a construction equipment manufacturing is to take all the various constraints into consideration. The offset time, due date, daily capacity of operations, daily jig's capacity, precedence relation, outsourcing, alternative resource and all of the shop floor environment should be considered. An APS(Advanced Planning & Scheduling) system is a proper and efficient system in such circumstance. In this paper, we present an APS system, the optimal scheduling system for the construction equipment manufacturing specifically for the body welding operation, using ILOG Solver/Scheduler. ILOG Solver/Scheduler is a general purposed commercial software which supports to find a feasible or optimal solution using object oriented technique and constraints satisfaction programming, given constraints and objectives.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.11a
• /
• pp.271-273
• /
• 2005

In order to carnation productivity improvement, ozonizer and negative ionizer has been designed and manufactured. The ozone is generated by DC positive streamer discharge and the negative ion is generated by DC negative discharge. When the ozone and negative ion are supplied growth room and farm to carnation cultivation, the carnation productivity is improved.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2004.05a
• /
• pp.308-312
• /
• 2004

In this paper, a silent discharge type ozonizer has been designed and fabricated for environment improvement. After that discharge and ozone generation characteristics in accordance with frequency of power supply and input voltage were investigated Consumed discharge un of silent discharge type ozonizer was calculated by computer program designed in "Sigma Hot 2000" program. The data needed for calculation was stored as ASCII file type from oscilloscope.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.87-91
• /
• 2013

Rubber Components have been playing important role for the isolation of noise and vibration of vehicle. This paper is presented the new method of dynamic modeling of rubber component for simulating the dynamic characteristics of it under the varing loading condition. Rubber dynamic model consists of the hyperelastic, viscoelastic and elasto-plastic characteristics of rubber. Dynamic proporties of rubber are calculated at each preload and frequency conditions, compared to test data, and evaluated the validity of rubber dynamic model. This technique is expected to understand and improve the characteristics of noise and vibration with relation to rubber components.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.6
• /
• pp.642-649
• /
• 2001

Precision parts and instruments are tested to evaluate performance in development-process and product-step to prement a potential defect due to a failure design. In this paper, Environmental test technology, which is the basis of reliability analysis, is introduced with examples of test criterion, test method for products, encoder and traffic signal controller, and measuring instruments. Recently, as the importance of the environmental test technology is recognised. It is proposed that tranining of test technician and technology of jig design and failure analysis are very essential.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.2
• /
• pp.171-183
• /
• 2001

The purpose of this study was compare the fracture strength of the IPS Empress ceramic crown according to the occlusal depth (1.5mm, 2.0mm, 2.5mm) and axial inclination ($4^{\circ},\;8^{\circ},\;12^{\circ}$) of the upper first molar. After 10 metal dies were made for each group, the IPS Empress ceramic crowns were fabricated and were cemented with resin cement. The cemented crowns mounted on the testing jig were inclined 30 degrees and a universal testing machine was used to measure the fracture strength. The results of this study were as follows: 1. The fracture strength of the ceramic crown with 2.5mm depth and $8^{\circ}$ inclination was the highest (1393N). Crowns of 1.5mm depth and $4^{\circ}$ inclination had the lowest strength (1015N) 2. There were no significant differences of the fracture strength according to occlusal depth and axial inclination. 3. Most fracture lines began at the loading area and extended through proximal surface perpendicular to the margin, irrespective of occlusal depth. 4. There was positive correlation between the fracture strength and the fracture surface area of crowns.