• 디지털산업정보학회논문지
• /
• 제8권1호
• /
• pp.117-123
• /
• 2012

This paper implements mobile Worldwide Interoperability for Microwave Access (WiMAX) receiver using Software Defined Radio (SDR) technology. SDR system is difficult to implement on the mobile handset because of restrictions that are computing power and under space constraints. The implemented receiver processes mobile WiMAX software modem on Open Multimedia Application Platform (OMAP) System on Chip (SoC) and Field Programmable Gate Array (FPGA). OMAP SoC is composed of ARM processor and Digital Signal Processor (DSP). ARM processor supports Single Instruction Multiple Data (SIMD) instruction which could operate on a vector of data with a single instruction and DSP is powerful image and video accelerators. For this reason, we suggest the possibility of SDR technology in the mobile handset. In order to verify the performance of the mobile WiMAX receiver, we measure the software modem runtime respectively. The experimental results show that the proposed receiver is able to do real-time signal processing.

• 디지털산업정보학회논문지
• /
• 제8권4호
• /
• pp.91-98
• /
• 2012

This paper implements 2X2 MIMO Long Term Evolution (LTE) base station using Software defined radio (SDR) technology. The implemented base station system processes baseband signals on a Graphics Processor Unit(GPU). GPU is a high-speed parallel processor which provides very important advantage of using a very powerful C-based programming environment that is Compute Unified Device Architecture (CUDA). The implemented software-based base station system processes baseband signals through GPU. It utilizes USRP2 as its RF transceiver. In order to guarantee a real-time processing of LTE baseband signals, we have adopted well-known signal processing algorithms such as frame synchronization algorithms, ML detection, etc. using GPU operating in parallel processing.

• 대한핵의학회:학술대회논문집
• /
• 대한핵의학회 1996년도 제35차 춘계학술대회 초록집
• /
• pp.178-178
• /
• 1996

• 대한치과기공학회지
• /
• 제37권2호
• /
• pp.63-67
• /
• 2015

Purpose: This study, it was observed on the effect of material and thickness of the mouth guard on postural balance in order to assess the influence of the use of a mouth guard. Methods: The mouth guards of 10 adults selected as the experiment subject was sorted into each of hard and soft material, and these were made as thickness of 2.0 mm, 2.5 mm, 3.0 mm, 3.5 mm by each of the material. Results: The results of this study are expected to wear the mouthguard hard to influence positive influence on the improvement of the muscle strength, static balance. Conclusion: Suggest the need for additional research on dynamic balance.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1655-1657
• /
• 2009

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2005년도 춘계학술대회 논문집
• /
• pp.383-388
• /
• 2005

In this paper Research development about a micro metal forming manufacturing system has been developed. A micro forming system has been achieved in Japan and it's developed micro press is limited to single forming process. To coincide with the purpose to be more practical, research and development is necessary about the press which the multi forming process is possible. We set the development of the equipment including micro deep drawing, micro punching and micro restriking process to the goal. To achieve this goal, Research about micro forming process to be related to multi process forming must be preceded first. Material selection and analysis about micro forming process are accomplished in this paper. And the basis research to make actual system is accomplished.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.409-413
• /
• 2008

In this paper, we introduce a platform of advanced multiple antenna system based on orthogonal frequency-division multiplexing (OFDM). The advanced multiple antennas have beamforming gain using array antenna. In array antenna systems, received signal has phase delay caused distance of each antennas, therefore it should compensate with optimum weight vector which calculated by Lagrange algorithm. To implement the presented above procedures using Digital Signal Processor (DSP), we should fixed-point design. The performance of implemented platform is verified through MATLAB$^{(R)}$ simulations with various signal environments.

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2012년도 심포지엄 및 춘계학술발표회
• /
• pp.269-270
• /
• 2012

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2012년도 심포지엄 및 춘계학술발표회
• /
• pp.267-268
• /
• 2012

• 한국약용작물학회:학술대회논문집
• /
• 한국약용작물학회 2012년도 심포지엄 및 춘계학술발표회
• /
• pp.263-264
• /
• 2012