• Journal of Dairy Science and Biotechnology
• /
• v.33 no.1
• /
• pp.47-57
• /
• 2015

Sodium is an essential nutrient with very important functions, including regulation of the extracellular fluid volume and active transport of molecules across the cell membranes. Since high levels of dietary sodium are associated with a high prevalence of hypertension, prehypertension, and other adverse effects on health, many national and international health organizations (WHO, FAO, etc.) recommend that sodium intake should be significantly decreased. In developed nations, cheese products, from among many processed foods, can cause high salt intake. Hence, there is an urgent need to reduce the content of salt in cheese processing, using various substitutes of sodium chloride (NaCl). In general, salt (NaCl) has been used as a food preservative to limit and (or) kill the growth of foodborne pathogens and spoilage organisms by decreasing the water activity, and to improve texture and flavor. To maintain public health, the salt content in cheese should be decreased without influencing the physicochemical properties of cheese. Therefore, the objective of this review is to outline the upcoming technologies used to reduce the salt content in different types of cheese using various substitutes.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.127-137
• /
• 2019

Zr electrorefining is demonstrated herein using Zirlo tubes in a chloride-fluoride mixed molten salt in the presence of $AlF_3$. Cyclic voltammetry reveals a monotonic shift in the onset of metal reduction kinetics towards positive potential and an increase in intensity of the additional peaks associated with Zr-Al alloy formation with increasing $AlF_3$ concentration. Unlike the galvanostatic deposition mode, a radial plate-type Zr growth is evident at the top surface of the salt during Zr electrorefining at a constant potential of -1.2 V. The diameter of the plate-type Zr deposit gradually increases with increasing $AlF_3$ concentration. Scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDX) and X-ray photoelectron spectroscopy (XPS) analyses for the plate-type Zr deposit show that trace amount of Al is incorporated as Zr-Al alloys with different chemical compositions between the top and bottom surface of the deposit. Addition of $AlF_3$ is effective in lowering the residual salt content in the deposit and in improving the current efficiency for Zr recovery.

• Korean Journal of Soil Science and Fertilizer
• /
• v.42 no.spc
• /
• pp.1-3
• /
• 2009

Silver nanoparticles have been used in agricultural practice because of their biocide effect. However, limited information is available for the effect of silver nanoparticles on soil quality. Therefore, the main purpose of this study was to evaluate effect of silver nanoparticle application on soil especially when fertilizer is applied. To simulate potassium fertilizer, potassium chloride was mixed with silver nanoparticles in soil. Concentration of silver and chloride was measured and result showed that concentration of both compounds was decreased at the range of $3.4mg\;kg^{-1}$ and 78-84% respectively after treatment. In addition, analysis of microbial population after treatment showed that microbial population was increased when silver nanoparticles and KCl were mixed. Those results indicated that application of fertilizer has impact on biocide effect of silver nanoparticles in soil.

• Applied Chemistry for Engineering
• /
• v.31 no.5
• /
• pp.552-559
• /
• 2020

Activated carbon-nickel (II) oxide (AC-NiO) electrodes were studied as materials for the capacitive deionization (CDI) of aqueous sodium chloride solution. AC-NiO electrodes were fabricated through physical mixing and low-temperature heating of precursor materials. The amount of NiO in the electrodes was varied and its effect on the deionization performance was investigated using a single-pass mode CDI setup. The pure activated carbon electrode showed the highest specific surface area among the electrodes. However, the AC-NiO electrode with approximately 10 and 20% of NiO displayed better deionization performance. The addition of a dielectric material like NiO to the carbon material resulted in the enhancement of the electric field, which eventually led to an improved deionization performance. Among all as-prepared electrodes, the AC-NiO electrode with approximately 10% of NiO gave the highest salt adsorption capacity and charge efficiency, which are equal to 7.46 mg/g and 90.1%, respectively. This finding can be attributed to the optimum enhancement of the physical and chemical characteristics of the electrode brought by the addition of the appropriate amount of NiO.

• Korean Chemical Engineering Research
• /
• v.54 no.2
• /
• pp.229-233
• /
• 2016

In this study, an efficient ultrasound-assisted liquid-liquid extraction process was developed for recovering of paclitaxel from plant cell cultures. The optimal ultrasonic power and operating time were 250 W and 15 min at fixed ratio of bottom phase, methylene chloride to top phase, MeOH (25%, v/v). Under the optimal conditions developed in the present method, most of the paclitaxel (~92%) was recovered from crude extract by a single extraction step. Due to the synergistic effect of ultrasound by the addition of inorganic salt, an appropriate inorganic salt concentration and the ultrasonic power were found to be required for the effective recovery of paclitaxel using ultrasound-assisted liquid-liquid extraction.

• Magazine of the Korea Concrete Institute
• /
• v.11 no.2
• /
• pp.221-230
• /
• 1999

Corrosion of rebars can occur if there are cracks, moisture and availability of oxygen or carbonation proceeds, chloride penetrates and diffuses in concrete. Once rebars in concrete corrodes, subsequently accompanied with scaling, spalling in concrete cover. As a result of them, the RC structure is seriously deteriorated. In this study, theoretical review and experiments for cathodic protection(CP) have been performed to control corrosion of rebars in concrete contained chlorides and pre-crack. For CP the impressed current system was applied, the protection effect was investigated when rebars was directly contacted with salt water due to crack and open to much chlorides in concrete. In order to investigate the effect of protection, when CP was energized for 1 year, half-cell potential, potential-decay with current density, corrosion ratio, etc. were measured. With the cathodic protection by impressed current system, the depolarized values of all specimen were met NACE Standard, the effect of 34~84% of the ratio of corrosion area and 84~86% of cross-section reduction were calculated.

• Elastomers and Composites
• /
• v.35 no.4
• /
• pp.288-295
• /
• 2000

It has been tried to decrease the crosslink density of vulcanized EPDM (ethylone-propylene-diene terpolymer) rubber through a chemical devulcanization treatment. Phase transfer catalyst, alkali metal (i.e., sodium), and triphenylphosphine have been used as a chemical agent ul the devulcanization treatment. Also it has been estimated the effect of the devulcanization treatment in the case of utilization of 2-butanol as a devulcanization reaction solvent. In the devulcanization treatment using quaternary ammonium salt as a phase transfer catalyst. the devulcanization effect has been studied with the variation of catalyst molecular weight and the choice of bromide or chloride cation. In the devulcanization treatment using sodium, it has been estimated the devulcanization treatment effect depending upon the variation of reaction variables such as amount of sodium used, reaction temperature, pressure of hydrogen gas, which is used as a reaction environment. The $M_c$ value (number average molecular weight between two crosslink points) has been experimentally estimated by the equilibrium swelling method and it is quantitatively related to the crosslink density. The estimation of devulcanization effect for vulcanized EPDM rubber has been carried out by the comparison of the $M_c$ values between the untreated and the treated specimens.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.6
• /
• pp.83-90
• /
• 2017

Concrete structure for nuclear power plant is mass concrete structure with large wall depth and easily permits cracking in early age due to hydration heat and drying shrinkage. It always needs cooling water so that usually located near to sea shore. The crack on concrete surface permits rapid chloride intrusion and also causes more rapid corrosion in the steel. In the study, the effect of age and crack width on chloride diffusion is evaluated for the concrete for nuclear power plant with 6000 psi strength. For the work, various crack widths with 0.0~1.4 mm are induced and accelerated diffusion test is performed for concrete with 56 days, 180days, and 365 days. With increasing crack width over 1.0mm, diffusion coefficient is enlarged to 2.7~3.1 times and significant reduction of diffusion is evaluated due to age effect. Furthermore, apparent diffusion coefficient and surface chloride content are evaluated for the concrete with various crack width exposed to atmospheric zone with salt spraying at the age of 180 days. The results are also analyzed with those from accelerated diffusion test.

• Journal of the Korea Concrete Institute
• /
• v.24 no.5
• /
• pp.553-558
• /
• 2012

Airborne chlorides are transported to inland by sea wind to be attached to seashore concrete structure surface then penetrated into concrete structure members. Since the surface attached chloride amount are dependent on the amount of airborne chlorides, the prediction of distribution of airborne chlorides is important information in preventing chloride corrosion problems in seashore concrete structures. The prediction of surface chloride amount from airborne chlorides environment is extremely difficult than concrete directly in contact with seawater. In addition, their penetrating tendency is different from that of concrete immersed in seawater. In this study, properties of surface and penetrated chlorides under airborne chlorides environment are investigated. Concrete specimens were manufactured and exposed to marine environment for 3 years. The specimens were analyzed at the time durations of 1, 2, and 3 years to check surface chloride amount to penetrated chloride depth. The results revealed that there were certain differences according to surface roughness of concrete and with and without washing effect due to rainfalls. The evaluation results showed that penetrated chlorides depend on amount of airborne chlorides and duration of exposure. In addition, a notable tendency of having deeper chloride penetration and higher chloride content in concrete members under long-term exposure was observed.

• Textile Coloration and Finishing
• /
• v.9 no.2
• /
• pp.41-49
• /
• 1997

To control free formaldehyde release from fabric finished with N-methylol compounds, resin finished cotton fabric was treated with resorcinol solution, dried and cured. Factors affecting to control formaldehyde release have been investigated. It was shown that the aftertreatment with resorcinol greatly suppressed the free formaldehyde release. Up to concentration of about 5% of resorcinol, the concentration of resorcinol effected on the control of free and evolved formaldehyde. And at high concentration of resorcinol, however, the concentration became rather insensitive to contol formaldehyde release. Addition of some salt catalysts such as ammonium chloride, zinc nitrate, sodium acetate and ammonium acetate, was effective in decreasing formaldehyde release. Considering the effect on the control of formaldehyde and crease recovery, ammonium acetate was concidered to be the best catalyst. It was observed that the optimum curing temperature for the resorcinol treatment was about 15$0^{\circ}C$, and that the curing time did not affected formaldehyde release over three minutes. Although the treatment of resorcinol had a little adverse effect on crease recovery of resin finished fabric, this effect could be negligible.