• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2006년도 하계종합학술대회
• /
• pp.127-128
• /
• 2006

In this paper, we propose a novel signaling method using chirp signals in UWB radio with satisfaction of FCC regulation. Chirp signals have been used in many ranging systems such as radar because of its good correlation properties. Because it is important to use broader signal bandwidth in order to get higher precision of the ranging, according to the Cramer-Rao Lower Bound, UWB radio is extremely good as the ranging systems. But, it is very difficult to apply existing chirp signals to UWB, because FCC regulates that the systems operating in UWB radio must occupy signal bandwidth more than 500MHz on the condition of stopping the frequency sweeping. So, we propose multiple chirp signals which can satisfy the regulation of FCC while maintaining chirp signal's properties. The multiple chirp signals which are composed of the sub-chirps modulated by sub-carriers can expand the signal bandwidth with the same principle of OFDM systems. The simulation results show that the BER performance of the proposed multiple chirp signals is identical to that of conventional OFDM when it is applied to data communication, and that the correlation properties of the proposed signals are almost the same with properties as those of single chirp signals whose sweeping bandwidth is the same value with the proposed one.

• 디지털융복합연구
• /
• 제11권7호
• /
• pp.201-207
• /
• 2013

첩 신호는 그 양호한 코릴레이션 특성으로 인하여 전통적으로 레이더에서 주로 사용되어 왔으나, 최근에는 ISO/IEC 24730-5와 IEEE 802.15.4a 등에서 위치추적을 위한 표준규격으로 선정되어 여러 회사에서 이 방식을 구현하고 있다. 본 논문에서는 무선채널을 라이시안 채널로 모델링하고, 신호대 간섭 잡음비를 S/I = -30[dB], -20[dB], -10[dB]의 세가지 경우로 고려하고, 각 경우마다 라이시안 팩터 K=10과 K=20를 적용하여 성능을 시뮬레이션하여 평가하였다. 성능평가 결과, S/I = -30[dB]에서는 K=10에서 K=20으로 신호조건이 변화하면서 25%의 성능이 향상되었고, S/I = -20[dB]에서는 약 27%, S/I = -10[dB]에서는 약 50%의 성능이 향상되었다. 결과적으로 S/I=-20[dB] 미만인 경우 가시성분이 성능을 향상시킨다고 하더라도 신호의 전력은 필요한 최소값이 요구된다. 한편, 신호대 잡음비가 S/I=-20[dB] 이상으로 유지되는 경우 신호의 가시성분을 강화시킨다면 시스템의 성능을 크게 향상시킬 수 있다.

• 전자공학회논문지B
• /
• 제30B권5호
• /
• pp.73-81
• /
• 1993

We have developed a system which can analyze the status of signal sent from/received to a signalling service equipment within the fully electronic switching system such as TDX-10. The system has such functions that acquire PCM signal of the preferred channel from the subhighway of the thirth-two channel by which a Universal Signal Tr ansceiver Unit(USTU) is connected with Time Switch Unit (TSU), and then classify the type of signal such as R2MFC/DTMF/CCT/VOICE, and determine the digit. Up to now, we have analyzed the frequency spec trum using the FFT. This paper describes the developement of PCM acquirer which can analyze the signal characteristics by acquiring the PCM signal in SHW(subhighway), and proposes the CZT(Chirp Z-Transform) algorithm. An algorithm which analyzes the acquired signal and determines the signal frequency and the corresponding power spectrum using the CZT is also discussed here.