• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4138-4146
• /
• 2011

In surface mount technology, with cellular phones and flat panel displays shrinking in size, the electric goods for making these things are getting smaller as well. Therefore, the technology of mounting components such as 0402 and 0603 Chip is on the rise. The chip mount manufacturing companies have studied the mount technology to prevent the missing insertions or improper insertion. This study suggests arranging the mechanical structure by using fiber sensors to eliminate missing insertions or improper insertions and developing the technology for upgrading system algorithms.

• Journal of Korean Society on Water Environment
• /
• v.23 no.1
• /
• pp.33-37
• /
• 2007

Microelectrodes for measuring nitrogenous compounds (${NH_4}^+$, ${NO_3}^-$) that were applied into the microfluidics chips was investigated, and the effect of temperature was especially examined. In this specific research, microelectrodes were first calibrated to check the function, and then microsensor that was combined microelectrode with microfluidic chip was re-calibrated. Experimental results showed that there are no change in the function between microelectrode and microfluidic chip. The electro motive force (EMF) for the ${NH_4}^+$ microsensor was similar to the one theoretically calculated from Nernst equation, but the EMF for ${NO_3}^-$ showed minor change.

• Journal of Power System Engineering
• /
• v.17 no.2
• /
• pp.38-45
• /
• 2013

In this study, for carrying out the spray and combustion experiment using a Common Rail Direct Injection(CRDI) system, the controller was fabricated to drive a high speed camera, a injector and a laser beam sequentially at a low cost. CB280 module of one-chip micro processer was used for the controller. In order to confirm responsibility and utility of the controller, the current drive performance, the spray behavior and the injection rate were tested and analyzed under various experimental conditions. As this research results, we found that the fabricated controller was able to control the devices for the spray experiment precisely with the input value in program and it had the dynamic load responsibility and repetition. Also, we found that the injection rates of our experimental results were higher than those of others at the same injection pressure and the controller connected with the laser system and the data acquisition system had validity for carrying out the spray visualization experiment.

• 지역과문화
• /
• v.6 no.1
• /
• pp.57-80
• /
• 2019

In this study, we will investigate Nujung culutre of Seobuk-jung in Hamra, which is representative Nujung in the modern period Iksan region, and examine how to use it as local contents. Hamra, where Seobyeog-jeong is located, was an economic center in the Joseon Dynasty. Under the historical and economic background, Seobyeong-jeong was erected by Lee, Chip-chon in 1926. The study of Seobyeong-jeong and Nujung culture erected by the Landloard family of Honam in modern times can be used as an important data for understanding the Nujung culture of modern Iksan Proviance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6B
• /
• pp.456-468
• /
• 2008

In this paper, we design Input/Output modules as a preference work for implementation of hybrid two stage AWG based WDM-PON and verify operations of each function modules through the logic simulation. This WDM-PON system provides service to 128 ONUs through 32 wavelength and one wavelength is shared for upstream transmission with four ONU while each wavelength is allocated to each ONU for downstream transmission. The designed WDM-PON MAC chip is based on sub-MAC which consists of one control unit and reception unit and four transmission unit. To design the reception and transmission unit of sub-MAC, we define the functions of the sub-MAC, pins of the modules, control signal and timing of each signal. We intend to design MAC chip with 1Gbps transmission rate. Thus the designed MAC chip is worked on 125MHz clock rate. We define FSM and design Input/Output modules with VHDL. The logic simulation of the modules is executed by the ModelSIM simulator.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.8B
• /
• pp.646-656
• /
• 2008

In this paper, we design and verify the MAC chip of the two-stage AWG-based WDM-PON which considers 128 ONUs and 32 wavelengths. Each wavelength with the capacity of 1Gbps is allocated to ONU for downstream transmission but each wavelength for upstream transmission can be shared by four ONUs. Therefore, MAC protocol is required to avoid the collision and use the network resource efficiently among ONUs which are sharing the same wavelength. To design a request/permit-based MAC protocol, we define a unit-chip module called sub-MAC. The WDM-PON with 128 ONUs can be implemented by using 32 sub-MAC modules. The sub-MAC consists of one control unit, one receipt unit and four transmission units. The state transition diagram of the module is described by the internal/external control signals among the functional units. The function of the sub-MAC module is verified through logic simulation using ModelSIM.

• Proceedings of the KIPE Conference
• /
• 2001.10a
• /
• pp.151-154
• /
• 2001

In this paper, a two-level switching algorithm of the deadbeat to control PWM inverter is proposed. A modified algorithm of the deadbeat is suitable for the UPS system. Two levels in the pulse pattern are used. This scheme allows the use of higher switching frequency for a given computation time delay, which results in lower total harmonic distortion at the output. The proposed control scheme is implemented using TMS320F240 DSP chip for controlling on inverter.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2003.11a
• /
• pp.69-72
• /
• 2003

This paper presents a signal processing IC for digital HDTV, which is designed to operate in bunt-in HDW or in HD-set-top Box. The chip supports de-multiplexing an ISO/IEC 13818-1 MPEG-2 TS stream. It decodes MPEG-2 MP@HL video bitstream, and provides high-quality scaled video for display on HDTV monitor. The chip consists of ARM7TDMI for TS-Demux, PCI interface, Audio interface, MPEG2 MP@HL video decoder Display processor, Graphic processor, Memory controller, Audio int3face, Smart Card interface and UART. It is fabricated using Sam sung's 0.18-um and the package of 492-pin BGA is used.

• ETRI Journal
• /
• v.38 no.3
• /
• pp.417-424
• /
• 2016

In this paper, an accurate characterization of a fabricated X-band transmit/receive module is described with the process of generating control data to correct amplitude and phase deviations in an active electronically scanned array antenna unit. In the characterization, quantization errors (from both a digitally controlled attenuator and a phase shifter) are considered using not theoretical values (due to discrete sets of amplitude and phase states) but measured values (of which implementation errors are a part). By using the presented procedure for the characterization, each initial control bit of both the attenuator and the phase shifter is closest to the required value for each array element position. In addition, each compensated control bit for the parasitic cross effect between amplitude and phase control is decided using the same procedure. Reduction of the peak sidelobe level of an array antenna is presented as an example to validate the proposed procedure.

• Korean Journal of Optics and Photonics
• /
• v.16 no.4
• /
• pp.345-353
• /
• 2005

We proposed a new and cost-effective method fer assembling holographic pickup modules without any high resolution vision system. Assembling was accomplished by adjusting photodiode package only, leading to a low cost, holographic pickup module. Focus and tracking error signals were simply determined by comparing spot sizes and by using the 3 beam method, respectively, based on four-sectional holographic optical elements. In experiment, we assembled a hologram module and estimated performance of the proposed method fur a holographic pickup module used in compact disc system.