• 건축역사연구
• /
• 제31권6호
• /
• pp.59-68
• /
• 2022

This paper is an architectural historical study on Chimi of Hwangnyongsa Temple. In this research, the shape and cross-section of the chimi are reviewed. The results of the study are as follows. The chimi is a form in which the head part facing the maru is omitted, and the upper and lower body are separated. The upper and lower bonds are assembled into a two types of joint throughout the side of the torso, and then bound with an iron strap. Because of the absence of ridge line in the front, and the narrow curved surface which makes the side plate close to the plane, the entire cross-section is triangular, and the rear plate maintains the shape of the chimi. The naerimmaru connected to the side of the chimi has a slope, so it is clear that the chimi was used on the woojingak-jibung(hipped-roof), and the wing part and back of the chimi are erected on the side roof. The height of the yongmaru and chunyeomaru is about the same and the roofing tiles of those are in contact. The roofing tiles of chunyemaru should be cut to fit the angle of the contacting part. The maru is 30 stories high of roofing tiles as a result of the on-board survey. Based on reference on the shape and timing of the production of chimi, the height of chimi, and the maru is believed to have been built before the Unified Silla Period and used in buildings with at least seven-kan frontage. Buildings corresponding to these construction conditions can be seen as Central hall and East hall in Hwangnyongsa temple.

• 건축역사연구
• /
• 제26권5호
• /
• pp.19-26
• /
• 2017

This paper aimed to identify the architectural characteristics of the chimi excavated from ancient ruins, especially middle gate remains of Bunhwangsa Temple in the Unified Silla period. Middle gate had planned $3{\times}2$ with 295mm measuring unit and gabled building. Detailed study of the shape of chimi of the middle gate restored by related field experts reveals as follows. 1) Height of chimi is 4.5(130.6cm) of Tang's system of measurement classified as large one. 2) The front and back side square hole is made for transverse timber placement. 3) Position of chimi is not the end of the ridge of roof, it moved toward the center. 4) Construction method of chimi is structured with smaller beam and center column. 5) Width and height of the ridge is less than 38cm and 54cm to be approximately, Width and height of the gabled ridge is less than 38cm and 50cm. 6) This chimi is considered to be very unique when compared to existing ancient restored chimis, it is designed to be advantageous to the chimi construction.

• 박물관보존과학
• /
• 제27권
• /
• pp.1-22
• /
• 2022

부여 부소산사지 출토 치미는 지난 1978년 부여박물관에서 복원하였지만, 오랜 시간이 지남에 따라 복원재료인 석고가 열화되면서 치미의 무게를 감당하지 못해 부분적으로 심하게 파손되어 있었다. 이를 보강하기 위해 응급으로 에폭시 수지를 사용하여 몸통 내부와 일부 꼬리 부분을 여러 차례 보강한 흔적이 있었다. 전시 기간에 맞춰 치미를 이동하기 위해 상태 점검을 하던 중 치미의 하부 몸통 및 날개 부분의 안정성이 매우 취약하다고 판단되어 다시 복원하기로 하였다. 재 복원하기 위해 치미를 해체하는 과정에서 당시 도공의 제작 방법을 유추해볼 수 있는 여러 제작흔적이 남아 있어 치미의 제작 방법을 연구할 수 있는 좋은 자료로 판단되어 조사하였다. 본 논문은 재 복원을 위해 해체하는 과정에서 밝혀진 부소산사지 치미의 제작기법을 정리하였다. 3차원 기술을 이용해 치미를 스캔한 후 해체 과정에서 살펴본 치미의 제작기법을 바탕으로 수직적이고 경직된 형태를 자연스러운 형태로 수정하고 복원하여 이전 재료를 교체함으로써 복원제의 내구성을 강화하였다. 모델링한 출력물을 본래 편과 접합하고 소실된 형태를 새롭게 만들어 완형으로 재 복원하였다.

• 보존과학회지
• /
• 제35권3호
• /
• pp.217-225
• /
• 2019

왕흥사지 치미는 현존하는 우리나라 최고(最古)의 치미로 왕흥사의 동건물지 남측에서 상단이, 북측에서 하단이 출토되었다. 2개의 치미는 조형적 특징이 유사하고 동일한 건물지의 양쪽에서 출토된 점을 미루어 볼 때, 한 쌍의 치미인 것으로 판단되는데, 2점 모두 유실부가 큰 관계로 본래의 모습을 확인하지 못하는 아쉬움이 있다. 따라서 본 연구에서는 왕흥사지 치미의 역사적 가치 회복을 위해 3차원 스캐닝과 컴퓨터 수치제어 기술(computer numerical control, 이하 CNC)을 이용하여 유실부의 복원품을 제작하였다. 유실부 복원은 조형적 특성을 기준으로 진행되었으며, 특히 국내 치미에서 휘어짐 현상이 관찰됨에 따라 실제 편의 휘어지는 방향을 토대로 모델링데이터가 자연스럽게 휘어지도록 수차례 수정하였으며 상 하단 문양의 자연스러운 연결과 경계면의 이격이 발생되지 않는 것에 중점을 두어 진행하였다. 이를 통해 3D 스캐닝과 CNC를 접목한 복원 방법은 비접촉식으로 유물에 손상을 주지 않고 작업성과 재현성이 우수하여 유물 복원에 적합함을 확인하였다. 뿐만 아니라, 모델링 데이터는 반영구적으로 사용이 가능한 바, 유물의 특성에 맞게 활용된다면 향후 문화유산 복원분야를 비롯한 사이버 가상 전시, hands-on 전시와 같은 다양한 형태의 전시와 교구 및 기념품 제작 등 다양한 분야에서도 활발히 활용될 것으로 사료된다.

• 보존과학회지
• /
• 제35권5호
• /
• pp.518-527
• /
• 2019

원주 법천사지(사적 제466호)에서 파편 상태로 출토된 치미의 제작기법을 조사하고 보존처리(복원)를 진행하였다. 치미의 제작기법 조사 결과는 동체부 제작, 날개부와 깃 부착, 장식부 제작, 상·하단 사절흔, 상·하단 연결을 위한 투공, 조형적 특징 등으로 나누어 서술하였다. 보존처리는 예비조사, 이물질 제거, 강화처리, 접합 및 복원, 색맞춤 순서로 진행하였다. 특히 접합 후 결손 부위의 원형 복원을 위해 3차원스캐닝 데이터를 활용하여 위치, 크기, 각도 등을 추정하였다. 복원한 치미는 높이 118 cm, 무게 121 kg에 이르는 대형 치미로서 이는 국내 완형(복원) 토제 치미 중 5번째로 큰 크기이다. 또한 깃이 뾰족한 형태의 치미는 현재까지의 국내에 알려진 유사 사례가 없어 희귀한 자료가 될 것으로 예상한다.

• Preventive Nutrition and Food Science
• /
• 제1권2호
• /
• pp.159-167
• /
• 1996

Effect of covering various levels(0, 1, 3, 5 and 7% per Chinese radish weight) of bamboo(Pseudosasa japonica Makino) leaves on the surface of Dongchimi was studied in the course of fermenting at 1$0^{\circ}C$ up to 75 days. Physicochemical, microbiogical, and sensory characteristics of Dongchimi were analyzed at regular intervals of 5 to 7 days during fermentation. Both the degree of pH drop from the initial 6.47~6.54and increase total acid content from the initial 0.004%, with the accumulation of organic acids tended to be more gradual depending upon the amounts of bamboo leaves covered. The increases of total solid content and turbidity were also suppressed in similar patterns, notably after 13 days of fermentation. The growth of total bacteria(1.5$\times$10$^4$cfu/ml, initial)was partly inhibited while that of lactic acid bacteria(1.8$\times$10$^4$cfu/ml, initial)was favorably encouraged by the presence of bamboo leaves. As a result of sensory evaluation, Dong-chimi covered with 1 and 3% bamboo leaves on showed the higher scores significantly(p<0.05, p<0.01, p<0.001) in overall acceptability till 39 days. But after 61 days, those covered with 3 and 5% bamboo leaves were rather preferable than any other one.

• 한국농공학회논문집
• /
• 제63권3호
• /
• pp.35-45
• /
• 2021

Digestate or slurry produced from anaerobic digestion is mostly applied to crop lands for its disposal and recovering nutrients. However, minimizing nitrogen losses following field application of the digestate is important for maximizing the plant's nitrogen uptake and reducing environmental concerns. This study was conducted to assess the effects of three different biogas digestate application techniques (sawdust mixed with digestate (SSD), the hole application method (HA), and digestate injected in the soil (SD)) on nitrate leaching potential in the soil. A pot laboratory experiment was conducted at room temperature of 25 ± 2 ℃ for 107 days. The experimental results showed that sawdust application method turned out to be appropriate for quick immobilization of surplus N in the form of microbial biomass N, reflecting its lower total nitrogen and NH₄-N contents and low pH. The NH₄-N and total nitrogen fate in the soil fertilized with manure showed no statistically significant (p > 0.05) differences between the different methods applied during the incubation time under room temperature. In contrast, NO₃-N concentration indicates significant reduction in sawdust treatment (p < 0.05) compared to the control and other application methods. However, the soil sawdust mixed with digestate was more effective than the other methods, because of the cumulative labile carbon contents of the amendment, which implies soil net N immobilization.

• 건축역사연구
• /
• 제29권2호
• /
• pp.75-88
• /
• 2020

There are stone sculptures diversely shaped in several parts of Gyeongbokgung. Geunjeongjeon is a place where the stone sculptures are intensively placed among the various palace buildings of Gyeongbokgung, and it is more important because it contains the phases of the age of the dynasty and the symbolism of governing philosophy. What can be seen in the structure of auspicious animal sculptures is based on the form of instinctive thought that the heavenly and human order systems are in an organic correspondence with each other, especially with regard to astronomical events such as Samwon Sasin 12jisin 28su. The parts that have been interpreted only in Sasin and 12jisin in the interpretations such as wild dogs, Gyoryong, camels, wolves, and apes were able to clarify the contents by revealing the form of 28su. In particular, as Beopsu Ssangbeopsu at the corner may be related to the guardian deity who governs water, called Yimun, Chimi, and Chimun, it is one of Bibo's ways to protect the palace that was vulnerable to fire. In addition, the shape of the existing 28su placed Dambi, but Ha Woldae at the Geunjeongjeon was assumed to have a camel statue and a planned arrangement of double meaning with the Bibo form of Pungsu Sasinsa, and it is also a feature of the arrangement of Woldae at the Geunjeongjeon. The actual composition of auspicious animals at the Nambogye of Geunjeongjeon was in the order of Haechi, wild dogs, horses and Jujak, and the contents of "Gyeongbokgung Construction Daily Record" were in the order of Haechi, horses, wild dogs, and Jujak. As to different composition layouts, based on the contents of the "Gyeongbok palace Construction Daily Record", the composition of Samjae Cheonjiin (天地人) was interpreted differently from the conventional interpretation of the arrangement of Woldae. All of these forms are associated with defense systems in the four directions and have become animal representations of each direction. The auspicious animal statues placed on the railing of Geunjeongjeon Woldae can be seen as reflected in a single building with the three dimensional personality that includes Pungsu's Bibo personality with the symbolic meaning that reveals the centrality as Jeong Jeon, the nation's best politics let alone the ideological system of the ancient astronomical of the East called Men Heaven Unity.

• Journal of Forest and Environmental Science
• /
• 제38권3호
• /
• pp.184-194
• /
• 2022

Triplochiton scleroxylon K. Schum is the plant species most affected by logging activities in the East Region of Cameroon due to its market value. This logging has impacted the ecological niche of the fern plant for which limited research has been done. The aim of this study is to contribute towards improving knowledge of fern richness and biomass on T. scleroxylon within the Central African sub-region. Fern data collection was done on 20 felled/harvested T. scleroxylon where, in addition to fern inventory, fern biomass was collected by the destructive method. The diameter and height of T. scleroxylon measured were used as explanatory variables in allometric equations for fern biomass estimation. Fern inventory was characterized using diversity index. Eight fern species were recorded on T. scleroxylon (≈5 species/T. scleroxylon). The minimum diameter where fern could be found is 59.4 cm. The average fern biomass found was 23.62 kg/T. scleroxylon. Pearson correlation coefficient showed a positive correlation (r>0.55) between fern biomass and T. scleroxylon diameter. For allometric equation, the logarithmic model improved better the adjustment than the non-logarithmic model. However, the quality of the adjustment is improved more when only the diameter is considered as an explanatory variable. Fern biomass is estimated to 90.08 kg/ha^-1 with 76.02 kg/ha^-1 being lost due to T. scleroxylon exploitation in the study area. This study is a contribution towards increasing knowledge of fern diversity specific to T. scleroxylon, and also fern biomass contribution to climate change mitigation and the potential carbon loss due to T. scleroxylon exploitation.