• 대한화학회지
• /
• 제23권2호
• /
• pp.88-93
• /
• 1979

구리(Ⅱ)를 이온교환한 제올라이트 Y에서 프로필렌의 흡착을 부피법, 온도상승에 따른 탈착법 및 전자스핀공명스펙트럼을 사용하여 검토하였다. 프로필렌의 흡착량은 구리이온의 교환도가 증가함에 따라 증가하였다. 흡착된 상태는 최소한 4가지로서 $6.4^{\circ}C$/min으로 온도를 상승시켰을 때 탈착온도가 $108^{\circ}C({\alpha})$ , $243^{\circ}C({\beta})$, $284^{\circ}C({\gamma})$ 및 $420^{\circ}C({\delta})$ 였다. 이중 ${\alpha}$피이크는 제올라이트 격자내에 흡착된 것이었고, ${\beta}$ 및 ${\gamma}$는 구리 이온과 구리 이온에 의해 생성될 수 있는 Br$\"{o}$nsted 산점에 의해 흡착된 것이라고 생각되며 ${\delta}$피이크는 Br$\"{o}$nsted 산점에 의한 프로필렌의 중합체의 분해물이라고 생각된다.

• Bulletin of the Korean Chemical Society
• /
• 제32권6호
• /
• pp.1980-1984
• /
• 2011

A temperature- and coverage-dependant quasi-reversible change in two-photon photoemission (2PPE) of chemisorbed 1-phenyl-1-propyne (PP) on Cu(111) is reported. For PP on Cu(111) at 300 K probed at a photon energy of 4.13 eV, two broad peaks of comparable intensity show final state energies of 7.25 and 7.75 eV above the Fermi level. The former peak could be assigned to the first image potential state (IS, n = 1) and/or unoccupied molecular orbital (UMO), located at 3.1 eV above the Fermi level. The latter is plausibly attributed to a mix of unoccupied higher-order IS (and/or UMO) and occupied surface state (SS) of Cu(111). With decreasing the temperature, the former 2PPE peak shows a shift in position by about 0.2 eV, and the latter exhibits a dramatic increase in intensity. In the system, intermolecular interactions (and/or order-disorder transition) of PP and substrate lattice temperature may play a significant role in change in photoexcitation lifetime (or excitation cross-section), and the unoccupied molecular orbital (UMO)-metal (IS) charge transfer coupling. Our unique 2PPE results provide a deeper insight for understanding photoexcitation charge transfer with temperature in an organic molecule/metal system.

• Bulletin of the Korean Chemical Society
• /
• 제32권4호
• /
• pp.1253-1257
• /
• 2011

The surface structures, adsorption conditions, and thermal desorption behaviors of cyclopentanethiol (CPT) self-assembled monolayers (SAMs) on Au(111) were investigated by scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and thermal desorption spectroscopy (TDS). STM imaging revealed that although the adsorption of CPT on Au(111) at room temperature generates disordered SAMs, CPT molecules at $50^{\circ}C$ formed well-ordered SAMs with a $(2{\surd}3{\times}{\surd}5)R41^{\circ}$ packing structure. XPS measurements showed that CPT SAMs at room temperature were formed via chemical reactions between the sulfur atoms and gold surfaces. TDS measurements showed two dominant TD peaks for the decomposed fragments ($C_5H_9^+$, m/e = 69) generated via C-S bond cleavage and the parent molecular species ($C_5H_9SH^+$, m/e = 102) derived from a recombination of the chemisorbed thiolates and hydrogen atoms near 440 K. Interestingly, dimerization of sulfur atoms in n-alkanethiol SAMs usually occurs during thermal desorption and the same reaction did not happen for CPT SAMs, which may be due to the steric hindrance of cyclic rings of the CPT molecules. In this study, we demonstrated that the alicyclic ring of organic thiols strongly affected the surface structure and thermal desorption behavior of SAMs, thus providing a good method for controlling chemical and physical properties of organic thiol SAMs.

• Bulletin of the Korean Chemical Society
• /
• 제35권3호
• /
• pp.875-880
• /
• 2014

Adsorption of 4,4'-bis(mercaptomethyl)biphenyl (44BMBP) on silver nanoparticles has been investigated by surface-enhanced Raman scattering (SERS) spectroscopy. In addition, the Raman spectra of 44BMBP in solid state and in basic condition have been obtained for comparative study to elicit the characteristics of adsorption. The observed Raman and SERS spectra were analyzed comparing with the normal modes and vibrational frequencies from density functional theory (DFT) calculations performed for the feasible structures of 44BMBP molecule. On the basis of excellent agreement between the calculated and the experimental results, the molecule is found to have both the cis- and trans-forms for the mercaptomethyl groups in the solid state as well as in the basic condition. In contrast, the molecule is found to be chemisorbed on the silver surface by forming two Ag-S linkages only in the cis-form but not in the trans-form due to the steric interruption, which indicates the parallel orientation of molecules on the surface. Particularly, the spectral features in the SERS spectra such as the absence of the C-H stretching band and enhancement for the out-of-plane skeletal modes are confirmatory for the parallel geometry through ${\pi}$ interaction between the phenyl rings and the metal surface, based on the electromagnetic surface selection rule.

• 마이크로전자및패키징학회지
• /
• 제11권4호
• /
• pp.87-91
• /
• 2004

[ $Sr_{0.8}Bi_{2.4}Ta_2O_9(SBT)/Pt$ ] 구조에서 $350^{\circ}C$ 온도로 수소열처리에 의한 강유전특성 열화를 방지하기 위한 W-N/Pt 하부전극의 효과를 살펴보았다. 그 결과 Pt와 SBT 박막사이에 증착된 W-N박막에 의해 수소의 확산을 차단할 수 있었다. Pt 표면에서 수소원자가 화학적인 흡착이 일어나지 않음으로써 흡착된 수소가 SBT 박막내의 산소와 결합하게 됨으로써 oxygen deficiency가 발생하는 것을 막을 수 있었다. W-N 박막이 양호한 확산방지막으로 작용하여 강유전특성의 열화현상을 방지 할 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.217-217
• /
• 2012

Solution-processed tungsten oxide thin film with thickness of about 30 nm is prepared from ammonium tungstate. This layer is introduced into the interface between the poly(3-hexylthiophene):[6,6]-phenyl-C61-butyric acid methyl ester (P3HT:PCBM) layer and the ITO electrode to be used as an electron blocking layer. The annealed tungsten oxide thin films at $150^{\circ}C$ and $300^{\circ}C$ show amorphous phase, while the $400^{\circ}C$ -annealed tungsten oxide film shows crystalline phase. At $150^{\circ}C$ annealing temperature, the conversion efficiency is significantly improved from 0.71% to 1.42% as the condition is changed from vacuum to air atmosphere, which is related to oxidation state of tungsten in amorphous phase. For the air annealing condition, the conversion efficiency is further increased from 1.42% to 2.01% as the temperature is increased from $150^{\circ}C$ to $300^{\circ}C$, which is mainly due to the removal of the chemisorbed water. However, a slight deterioration in photovoltaic performance is observed when the temperature is increased to $400^{\circ}C$, which is ascribed to poor electron blocking ability due to the formation of crystalline phase. It is concluded that $W^{6+}$ oxidation state and amorphous nature in tungsten oxide interlayer is essential for blocking electron effectively from the active layer to the ITO electrode.

• Korean Chemical Engineering Research
• /
• 제46권6호
• /
• pp.1069-1074
• /
• 2008

구리 나노입자의 표면에 화학흡착한 octanethiol, decanethiol 및 dodecanethiol의 3D SAMs를 연구하였고, dodecanethiol의 투입량 변화에 따른 구리 나노입자의 산화 안정성을 고찰하였다. 제조 공정은 산소로부터 보호하기 위해 질소 분위기에서 수행하였고, 합성된 입자는 원심분리를 통하여 획득하였다. 구리 전구체는 Copper(II) nitrate, 환원제는 sodium borohydride를 사용하였으며, 반응은 단일상에서 진행하였다. 나노 크기의 구리입자는 TEM 분석을 통하여 확인하였고, 그 크기는 약 3~6 nm였다. FT-IR, XPS와 열중량분석(TGA) 결과 alkanethiol의 thiol기가 구리 표면에 화학흡착 한다는 것과 alkyl기의 사슬이 길수록 alkanethiol의 흡착양이 증가한다는 것을 확인하였고, XRD 패턴으로부터 구리 나노입자의 거대격자회절(superlattice diffraction)을 관측할 수 있었다. 그리고 dodecanethiol의 투입양이 구리의 투입양보다 적을 경우 구리는 $Cu_2O$의 형태로 산화되었으며, 구리보다 1.25배 많이 투입할 경우 더욱 조밀한 SAMs를 형성하였다.

• 한국자동차공학회논문집
• /
• 제14권3호
• /
• pp.125-132
• /
• 2006

Transient kinetics of $NH_3$ adsorption/desorption and of SCR(selective catalytic reduction) of NO with $NH_3$ were studied over vanadium based catalysts, such as $V_2O_5/TiO_2$ and $V_2O_5-WO_3/TiO_2$. In the present catalytic reaction process, NO adsorption is neglected while $NH_3$ is strongly chemisorbed on the catalytic surface. Accordingly, it is ruled out the possibility of a reaction between strongly adsorbed $NH_3$ and NO species in line with the hypothesis of an Eley-Rideal mechanism. The present kinetic model assumes; (1) non-activated $NH_3$ adsorption, (2) Temkin-type $NH_3$ coverage dependence of the desorption energy, (3) non-linear dependence of the SCR reaction rate on the $NH_3$ surface coverage. Thus, the surface heterogeneity for adsorption/desorption of $NH_3$ is taken into account in this model. The present study extends the pure chemical kinetic model based on a powdered-phase catalytic system to the chemico-physical one applicable to a realistic monolith reactor.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.145-146
• /
• 2007

Dye-Sensitized Solar Cell Solar cells(DSSC) were appeared for overcoming global environmental problems and lack of fossil fuel problems. And it is one of study field that is getting into the spotlight lately because manufacturing method is more simple and inexpensive than existing silicon solar cells. Oxide semiconductor is used for adsorption of dye and electron transfer in DSSC study, and $TiO_2$ is used most usually. Overall light conversion efficiency is changed by several elements such as $TiO_2$ particle size and structure, pore size and shape. In this study, we report the solar cell performance of titania$(TiO_2)$ film electrodes with various particle sizes. $TiO_2$ particle size was 16 nm, 25 nm, and mixture of 16nm and 25 nm, and manufactured using Doctor blade method. When applied each $TiO_2$ film to DSSC, the best efficiency was found at 16nm of $TiO_2$ particle. 16nm of $TiO_2$ particle has the highest efficiency compared to the others, because particles with smaller diameters would adsorb more dye due to larger surface area. And in case of the mixture of 16nm and 25 nm, the surface area was smaller than expected. It is estimated that double layer is adsorbed a large amount of chemisorbed dye and improved light scattering leading due to efficiency concentration light than mono layer.

• Bulletin of the Korean Chemical Society
• /
• 제19권9호
• /
• pp.934-942
• /
• 1998

$^13CO$ chemisorbed on platinum particles in L-zeolite has been investigated by static and magic angle spinning NMR spectroscopy. The representative spectra are composed of a broad asymmetric peak with a center of gravity at 230±30 ppm and a sharp symmetric peak at 124±2 ppm which is tentatively assigned to physisorbed $CO_2$, on inner walls of L-zeolite. Overall, the broad resonance component is similar to our previous results of highly dispersed (80-96%) CO/Pt/silica or CO/Pt/alumina samples, still showing metallic characters. The principal difference is in the first moment value. The broad peak in the spectra is assigned to CO linearly bound to Pt particles in the L-zeolites, and indicates a distribution of isotropic shifts from bonding site to bonding site. The NMR results reported here manifest that the Pt particles inside of the L-zeolites channels are not collectively the same with the ones supported on silica or alumina with similar dispersion in terms of Pt particle shape and/or ordering of Pt atoms in a particle. As a result, Pt particles of CO/Pt/L-zeolite were agglomerated accompanying CO desorption upon annealing. There were no definite changes in the NMR spectra due to differences of exchanged cations. Comparison of our observation on CO/Pt/L-zeolite with Sharma et al.'s reveals that even when the first moment, the linewidtb, and the relaxation times of the static spectra and the dispersion measured by chemisorption are similar, the properties of Pt particles can be dramatically different. Therefore, it is essential to take advantage of the strengths of several techniques together in order to interpret data reliably, especially for the highly dispersed samples.