• Journal of Microbiology and Biotechnology
• /
• v.19 no.7
• /
• pp.734-741
• /
• 2009

Recently, strains of methicillin-resistant Staphylococcus aureus (MRSA) with reduced susceptibility to vancomycin (VCM) have been clinically isolated. The antibacterial activity of a new drug, linezolid (LZD), in such a strain was evaluated by measuring bacterial metabolic activity. A total of 73 MRSA strains having various susceptibilities to VCM were subjected to a novel and highly sensitive chemiluminescence-based assay. LZD MIC in the tested strains, measured by the microbroth dilution method, was within the range 1-4 mg/l (mostly ${\leq}2$mg/l), except for one LZD-resistant strain (NRS127; MIC=7 mg/l), and showed no correlation with VCM resistance. The chemiluminescence assay demonstrated that bacterial metabolic activity was strongly suppressed with increasing LZD concentration. The chemiluminescence intensity curve had a low baseline activity without tailing in most strains. The present results suggest that LZD has strong antibacterial activity against MRSA strains, and would be effective for treatment of infections that are poorly responsive to VCM. The chemiluminescence assay facilitated sensitive and discriminative susceptibility testing within a relatively short time.

• Bulletin of the Korean Chemical Society
• /
• v.23 no.2
• /
• pp.291-294
• /
• 2002

The reactions of triplet oxygen atom with halomethanes as a potential fire extinguisher were studied by a discharge flow-chemiluminescence imaging method. The experiments were carried out under second order conditions. The bimolecular atom-molecule reaction rate constants were determined in terms of the initial rate method. The initial concentration of oxygen atom was also determined under second order rate law instead of the pseudo-first order conditions with $[O(^3P)]_0{\ll}[sample]_0$. The second order conditions were more reliable than pseudo-first order conditions for the determinations of rate constants. The rate constants of the reactions $CF_3I\;+\;O(^3P)$, $CH_3PI\;+\'O(^3P)$, and $CHBrCl_2\;+\;O(^3P)$ were determined to be $5.0\;{\times}\;10^{-12}$ , $1.1\;×\;0^{-11}$ , and $1.9\;{\times}\;10^{-14}cm^3molecule^{-1}s^{-1}$, respectively.

• Bulletin of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.171-176
• /
• 2012

A novel chemiluminescence (CL) system was established for the determination of cytosine arabinoside (Ara-C) in pharmaceutical preparations. It was showed that a clear CL signal was observed when Eosin Y mixed with Fenton reagent. The CL intensity was decreased significantly when Ara-C was added to the reaction system and partially scavenged the hydroxyl radicals in the solution. The extent of decrease in the CL intensity had a good stoichiometrical relationship with the Ara-C concentration. Based on this, we developed a new method for the determination of Ara-C using a flow injection analysis (FIA) technique with CL detection. Under the optimal conditions, the linear range of Ara-C concentration was $6.0{\times}10^{-9}\sim1.0{\times}10^{-7}mol/L$ (R = 0.9982) with a detection limit of $7.6{\times}10^{-10}mol/L$ (S/N=3), the RSD was 5.6% for $6.0{\times}10^{-8}mol/L$ Ara-C (n = 11). The method was successfully applied to the determination of Ara-C in injection samples. The possible chemiluminescence reaction mechanism was discussed.

• Applied Chemistry
• /
• v.15 no.1
• /
• pp.33-36
• /
• 2011

A chemiluminescent method with gold nanoparticles for determination of vitamin C has been presented. Gold nanoparticles highly increased chemiluminescence intensity of lumimol-H₂O₂ system by its catalytic effect. The gold nanoparticles enhanced chemiluminescent method is applicable for the determination of an antioxidant such as vitamin C. When vitamin C was introduced to the lumimol system with gold nanoparticles, chemiluminescence intensity was reduced with the concentration of the added vitamin C. Low concentrated vitamin C solutions in the range of 1×10^-3-1×10^-9 M were produced reduced chemiluminescence intensity of lumimol-H₂O₂ with gold nanoparticles system.

• Journal of the Korean Chemical Society
• /
• v.46 no.2
• /
• pp.145-150
• /
• 2002

A Method to determine Cr(III)ion in aqueous solution by chemiluminescence method using a stopped flow system has been studied. The method is based on the increased chemiluminescence intensity with the addition of Cr(III) to a solution of lucigenin a nd hyrogen peroxide. The effects of pH, injection volumes of reagent and sample, and concentration of lucigenin and hyrogen peroxide on the chemiluminescence intensity have been investigated. The calibration curve for Cr(III) ion was linear over the range from 1.0${\times}$$10^{-6}$ to 1.0${\times}$$10^{-3}$M and the detection limit was 5.2${\times}$$10^{-8}$M under the optimal experimental condition of 437nm, 12.8,and 1.0${\times}$$10^{-6}$ and 2.0M for emission wavelength, pH, and concentration of lucigenin and hyrogen peroxide, respectively.

• 한국연소학회:학술대회논문집
• /
• 2014.11a
• /
• pp.91-94
• /
• 2014

In this study, the laminar burning velocities of SNG fuel were studied using both experimental measurements and kinetic simulations. They were measured using the angle method of Bunsen flame configuration and the annular diverging channel combustor. And they were also numerically calculated by CHEMKIN Package with GRI 3.0 mechanisms. Spectrometer was used for characteristics of flame chemiluminescence of SNG fuels. From results of this work, first, we found that according to adding $H_2$ contents in the fuels the laminar burning velocities of SNG fuels were increased. And second, we also discovered existence of OH*, CH*, $C_2*$, HCO*, $CH_2*$ radicals and their correlation.

• Journal of Mechanical Science and Technology
• /
• v.18 no.11
• /
• pp.2058-2065
• /
• 2004

A light collecting probe named Multi-color Integrated Cassegrain Receiving Optics (MICRO) is applied to spark-ignited spherical spray flames to obtain the flame propagation speed in freely falling droplet suspension produced by an ultrasonic atomizer. Two MICRO probes are used to monitor time-series signals of OH chemiluminescence from two different locations in the flame. By detecting the arrival time difference of the propagating flame front, the flame propagation speed is calculated with a two-point delay-time method. In addition, time-series images of OH chemiluminescence are simultaneously obtained by a high-speed digital CCD camera to ensure the validity of the two-point delay-time method by the MICRO system. Furthermore, the relationship between the spray properties measured by phase Doppler anemometer (PDA) and the flame propagation speed are discussed with three different experimental conditions by changing the fuel injection rate. It was confirmed that the two-point delay-time method with two MICRO probes is useful and convenient to obtain the flame propagation speed and that the flame propagation speed depends on the spray properties.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.474-477
• /
• 1998

A simple and rapid method for preparation of standard phosphatidylcholine hydroperoxide (PCOOH) in chemiluminescence-HPLC assay (CL-HPLC) was developed using the rose bengal dependent spectrofluorometric oxidation. The concentration of obtained PCOOH was determined by FOX (ferrous oxidation-xylenol orange) assay and then subjected to a CL-HPLC system.

• Journal of the Korean Society of Safety
• /
• v.7 no.4
• /
• pp.23-32
• /
• 1992

Surface treatment and chemiluminescence characteristics of the polymer film. It was studied that the Intensities and rates of treatments are in proportional to condition of the treatment, considering the results of study on treatments to polymer film with discharge and ultraviolet irradiation through the methods such as surface resistance, contact angle, dyeing method, solace ten-sion and so on. It was also studied that the said has a nice correlation with the concerned result studied by chemiluminescence. Since the chemiluminescence will enable the Investigators to grasp a eertain condition caused by quitely slight deterioration with high sensitivity, it can be also used as a way for getting an information regarding the decision for degradation-condition and life-estimating of insulation material basically related to some security matters as well as surface condition of treatments through the above method.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.27 no.12
• /
• pp.609-619
• /
• 2015

A preprocessing scheme utilizing multi-division of the ROI (region of interest) in a chemiluminescence image during inversion is proposed. The resulting inverted image shows the flame's structure, which can be useful for studying combustion instability. The flame structure is often quantitatively visualized with PLIF (planar laser-induced fluorescence) images as well. The chemiluminescence image, which is a line-integral of the flame, needs to be preprocessed before inversion, mainly due to the inherent noise and the assumption of axisymmetry during the inversion. The feasibility of the multi-division preprocessing technique has been tested with experimentally-obtained OH PLIF and $OH^*$ chemiluminescence images of jet and swirl-stabilized flames burning substitute natural gas (SNG). It turns out that the technique outperforms two conventional methods, specifically, the technique without preprocessing and the one with uni-division, reconstructing the SNG flame structures much better than its two counterparts when compared using corresponding OH PLIF images. The characteristics of the optimum degree of polynomials to be applied for curve-fitting of the flame region data for the multi-division method involving two flames has also been investigated.