• International Journal of Naval Architecture and Ocean Engineering
• /
• v.10 no.2
• /
• pp.180-187
• /
• 2018

Corrugated bulkhead has been adopted for cargo tank bulkheads of commercial vessels such as bulk carriers, product oil carriers and chemical tankers. It is considered that corrugated bulkhead is a preferred structural solution, compared to the flat stiffened bulkhead, due to several advantages such as lower mass, easier maintenance and smaller corrosion problems. Many researches to find the optimum shape of corrugated bulkhead have been mostly carried out for bulk carriers. Compared to corrugated bulkheads of bulk carriers, ones of chemical tankers are more complicated since they are composed of transverse and longitudinal bulkheads, and they are made of higher priced materials. The purpose of this study is the development of minimum weight design method for corrugated bulkhead of chemical tankers. Evolution strategy is applied as an optimization technique. It has been verified from many researches that evolution strategy searches global optimum point prominently by using multi-individual searching technique. Multi-individual searching methods need excessive time if they connect to 3-D finite element model for repetitive structural analyses. In order to resolve this issue, 2-D beam element connected to deck and lower stool is substituted for a corrugated structure in this study. To verify the reliability of the structural responses by idealized 2-D beam model, they have been compared with ones by 3-D finite element model. In this study, optimum design for corrugated bulkhead of 30 K chemical tanker has been carried out, and the results by developed optimum design program have been compared with design data of existing ship. It is found out that optimum design is about 9% lighter than one of existing ship.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.1-7
• /
• 2013

In past decades, a maximum standard vessel size for chemical tankers is not normally larger than 55,000 TDW due to the characteristic of chemical product shipment which is so variable but small quantity unlike single product carries such as crude oil tankers. These days, as demand of very large chemical tanker is rising due to the change of market trend of chemical product shipment, 75,000 TDW class chemical tanker has been developed. The newly developed vessel's structure has been designed based on CSR (Common Structural Rule) for double hull oil tankers (hereafter CSR) published by IACS (International Association of Classification Societies). However, due to the large difference from typical oil tankers, many items should be specially considered such as on deck transverse and corrugated bulkheads. In addition, two longitudinal bulkheads without upper stool have been constructed in order to maximise the number of cargo tanks and the volume of each cargo tanks. In this study, key word of the vessel has been briefly reviewed and the structural reliability of the proposed vessel has been investigated.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.51-56
• /
• 2016

Corrugated bulkheads have many advantages compared to stiffened bulkheads, and they have thus been used for the cargo tank bulkheads of commercial vessels, such as bulk carriers, product oil carriers, and chemical tankers. Various studies have been carried out to find the optimum corrugation shape for bulk carriers, but optimum design studies for chemical tankers with bulkheads made of high-priced materials are scarce. The purpose of this study is to develop a minimum weight design method for horizontal corrugated bulkheads for a chemical tanker. An evolution strategy (ES) that searches for a reliable global optimum point was applied as an optimization technique, and the structural safety of the optimum design was verified through structural analysis using the finite element method (FEM). The results were compared with those of an existing ship, which showed a weight reduction of about 14% with equivalent structural strength.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.439-450
• /
• 2015

This study objects to find characteristics in chemical tanker markets and to determine optimal chemical tanker size using a total shipping cost in main trading route of asia chemical tankers .Precedent studies of determination of the optimal ship size and case studies about chemical tankers was carried out and tried to introduce a cost model which is applicable to chemical tanker. This study is dependant on numerical analysis and involves scenario analysis to minimize sensitivity of results. This analysis shows as follows. First, 12,000DWT tanker is an optimal size on the 'Far East-Middle East' services, 9,000DWT tanker is a most competitive on the 'Far East-South East Asia' services and 3,000DWT tanker is a most economic size on the 'Inner Far East' services at average market situation. Second, the bigger size of chemical tanker, the more competitive advantage the tanker will obtain when bunker fuel prices rise. Small size ship gets more competitive during bunker prices down. Third, market fluctuation of time charter rate for chemical tanker is less than 20% against its average time charter hire which means less volatile. And tanker's competitiveness per each size is remained mostly same when time charterer rates rise at same proportion. Fourth, bigger size chemical tankers have cost advantages when tanker's quantity of each part cargo increase. And small-sized tanks are more competitive when part cargo scales decrease. For the last, ship's port stay strongly influences on the determination of the optical tanker size. When vessel has shorter port stay, bigger-sized tanker will be more competitive and even can be competitive if applies in short voyage as well.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.4
• /
• pp.301-306
• /
• 2016

During the initial stage of propulsion shaft design, the shaft alignment process includes a thorough consideration of lateral vibration to verify the operational safety of the shaft. However, a theoretical method for analyzing forced lateral vibrations has not been clearly established. The methods currently used in classification societies and international standards can only ensure a sufficient margin to avoid the blade-passing frequency resonance speed outside the range of ${\pm}20%$ of the maximum continuous rating (MCR) for the engine. Typically, in shaft alignment analyses, longer center distances between the support bearings promote affirmative results, but the blade order resonance speed can approach the lower limit for lateral vibration. Therefore, this matter requires careful attention by engineers, and a verification of the theoretical analysis by experimental measurements is highly desirable. In this study, both theoretical and experimental analyses were conducted using strain gauges under two draught conditions of vessels used as 50,000-DWT oil/chemical tankers, introduced recently as eco-friendly ships. Based on the analyses, the influence of the lateral vibration on the shafting system and the system's reliability was reviewed.

• Journal of Ocean Engineering and Technology
• /
• v.24 no.2
• /
• pp.41-46
• /
• 2010

This paper deals with the problem of developing a new decision procedure for the freeboard of a coastal chemical tanker going on the coast. The decision procedure is mainly constructed with the algorithm of estimating statistically the time period that deck wetness will last on the deck of the ship. Deck wetness is one of the most important safety factors for sailing of a coaster. It generally means the situation in which the amplitude of the relative motion between the deck and the surface of the wave exceeds the freeboard. Therefore, in this paper, we proposed that the time during which the amplitude remains above the level of the freeboard should be appraised on the basis of statistical theory. A series of numerical calculations were executed for four different coastal chemical tankers (199G/T Type II, III & 499G/T Type II, III). It was demonstrated that the present decision procedure of freeboard is practical for planning the type of coaster sailing in the sea.

• Journal of Korea Port Economic Association
• /
• v.21 no.4
• /
• pp.121-139
• /
• 2005

The case, Papera Traders Co. Ltd. and Others v. Hyundai Merchant Marine Co. Ltd and Another(The Eurasian Dream), was occurred on July, 1998 when the ISM Code became mandatory under SOLAS and from that date it applied to oil tankers, chemical tankers, gas carriers, bulk carriers and cargo high-speed craft of 500 gross tonnage and above. On July 23, 1998, a fire started on the deck of pure car carrier Eurasian Dream while in port at Sharjah. The source of fuel was the stevedores action of pouring petrol or transferring fuel in some way - refueling or pouring into a carburettor. The fire eventually destroyed or damaged the vessels cargo of new and second-hand vehicles and rendered the vessel itself a constructive total loss. Justice Cresswell held that the fire that destroyed or damaged the cargo was due to the unseaworthiness of the vessel they have the burden of proving that the vessel was unseaworthy before and at the beginning of the voyage and that the loss or damage was caused by that unseaworthiness. This case was a dispute between dependent and claimant alleging that the carrier should provide "properly man, equip and supply the ship and keep the ship so manned" under Hague-Visby Rules. Although ISM code was not officially applied to the carriage by car carriers until July 2002, a rule based on the code had customarily been employed as a mean for international dispute resolution. Examining the above case closely, the purpose of this study is to explore the relation of ship management and obligation to exercise due diligence in making the vessel seaworthy.

• Journal of Korea Port Economic Association
• /
• v.23 no.3
• /
• pp.103-126
• /
• 2007

As a result of the development of heavy and chemical industries during the Economic Development Plan, Korean shipbuilding industry expanded its capacity rapidly and became a strategic export industry. The 1973 Arab oil crisis and the subsequent doubling of oil prices greatly reduced world demand for tankers and the market was crashed as numberous orders for tankers were cancelled in Japan and Europe. Under these circumstances, Korean Shipping industry also experienced a decrease in overseas demand for shipbuilding. The Korean government established the 'planned shipbuilding' scheme. The primary purpose of the scheme was to develop the shipbuilding industry, to link the industry to the shipping industry and to develop both industries together. However, Japanese shipping established goals linking with macro-national economic policy, such as saving foreign currencies and freight of importing goods, also assisting reconstruction and development of shipbuilding industry. To accomplish these goals, Japanese government used several policy tools such as financial assistance, law, guidance.

• Journal of Mechanical Science and Technology
• /
• v.16 no.1
• /
• pp.24-31
• /
• 2002

The leak-before-break (LBB) behaviors of a structural component under high and low fatigue loads are an important problem in nuclear power plants, liquid nitrogen gas tankers and chemical plants. This paper is an experimental study to evaluate the crack opening behavior after penetration for plate and pipe specimens. Crack opening displacement after penetration under low fatigue load could be satisfactorily determined at the center of the plate thickness regardless of the specimen size. In the case of high fatigue load, it is shown that the crack opening displacement at the center of a penetrated crack carl be derived using the gross stress, $\sigma$/sug G/, and the front surface crack length, a$\_$s/, together with the back surface crack length, a$\_$b/.

• Journal of Navigation and Port Research
• /
• v.29 no.7
• /
• pp.595-601
• /
• 2005

The IMO manoeuvrability standard was established for preventing sea accidents such as collisions and strandings due to the lack of manoeuvrability. The standard of ship manoeuvrability enforced by resolution MSC.l37(76) has been applied to vessels of 100m or more in length and all chemical tankers and gas carriers regardless of the length, which were constructed on or after 1 July 1994. The IMO manoeuvrability standard is able to be divided into three kinds as followings; (1) Turning capability standard: Estimated values in design stage are to be certified by turning circle test of the actual vessel. (2) Course keeping quality standard : Estimated values in design stage are to be certified by 10 deg. and 20 deg. zig-zag tests of the actual vessel. (3) Shortest stopping distance standard : Estimated value in design stage is to be certified by the shortest stopping distance tested by the actual vessel. In this paper, the authors verified the criteria of IMO manoeuvrability standard comparing them with the values resulted from sea trial tests of various kinds of actual vessels and examined separately the validity of all criteria of the standard.