• Korean Journal of Environmental Agriculture
• /
• v.42 no.4
• /
• pp.435-443
• /
• 2023

Global concern over climate change, driven by greenhouse gas emissions, has prompted widespread interest in sustainable solutions. In the agricultural sector, biochar has emerged as a focal point for mitigating these emissions. This study investigated the impact of continuous biochar application on CO₂ and N₂O emissions during the spring cabbage cultivation period. Greenhouse gas emissions in the biochar treatment groups (soils treated with 1, 3, and 5 tons/ha of rice husk biochar) were compared to those in the control group without biochar. During the spring cabbage cultivation period in 2022, the total CO₂ emissions were in the range of 71.6-119.0 g/m² day, and in 2023, with continuous biochar application, they were in the range of 71.6-102.1 g/m² day. The total emissions of N₂O in 2022 and 2023 were in the range of 11.7-23.7 and 7.8-19.9 g/m² day, respectively. Overall, greenhouse gas emissions decreased after biochar treatment, confirming the positive influence of biochar on mitigating greenhouse gas release from the soil. Nevertheless, further research over an extended period exceeding five years is deemed essential to delve into the specific mechanisms behind these observed changes and to assess the long-term sustainability of biochar's impact on greenhouse gas dynamics in agricultural settings.

• Journal of Sensor Science and Technology
• /
• v.32 no.5
• /
• pp.328-333
• /
• 2023

This study experimentally verified the etch rate of the SiO₂ sacrificial layer etching process with a single etch hole using vapor-phase hydrogen fluoride (VHF) etching. To fabricate small-sized polysilicon etch holes, both circular and triangular pattern masks were employed. Etch holes were fabricated in the polysilicon thin film on the SiO₂ sacrificial layer, and VHF etching was performed to release the polysilicon thin film. The lateral etch rate was measured for varying etch hole sizes and sacrificial layer thicknesses. Based on the measured results, we obtained an approximate equation for the etch rate as a function of the etch hole size and sacrificial layer thickness. The etch rates obtained in this study can be utilized to minimize structural damage caused by incomplete or excessive etching in sacrificial layer processes. In addition, the results of this study provide insights for optimizing sacrificial layer etching and properly designing the size and spacing of the etch holes. In the future, further research will be conducted to explore the formation of structures using chemical vapor deposition (CVD) processes to simultaneously seal etch hole and prevent adhesion owing to polysilicon film vibration.

• Annals of Occupational and Environmental Medicine
• /
• v.35
• /
• pp.34.1-34.8
• /
• 2023

Background: Hydrogen sulfide is a toxic substance that humans can be exposed to occupationally, and cases of hydrogen sulfide poisoning of workers in industrial sites are commonly reported. However, there have been no cases of poisoning of the public due to an unauthorized discharge of wastewater, so it is important to describe this incident. Case presentation: In a small village in Jeollanam-do, Republic of Korea, accounts of a terrible stench had been reported. A 26-year-old man who lived and worked in a foul-smelling area was taken to the emergency room with a headache, dizziness, nausea, and repeated syncope. A subsequent police and Ministry of Environment investigation determined that the cause of the stench was the unauthorized discharge of 9 tons of wastewater containing hydrogen sulfide through a stormwater pipe while the villagers were sleeping. The patient had no previous medical history or experience of symptoms. Leukocytes and cardiac markers were elevated, an electrocardiogram indicated biatrial enlargement, left ventricular hypertrophy, and corrected QT interval prolongation. Myocardial hypertrophy was detected on a chest computed tomography scan, and hypertrophic cardiomyopathy was confirmed on echocardiography. After hospitalization, cardiac marker concentrations declined, symptoms improved, and the patient was discharged after 7 days of hospitalization. There was no recurrence of symptoms after discharge. Conclusions: We suspect that previously unrecognized heart disease manifested or was aggravated in this patient due to exposure to hydrogen sulfide. Attention should be paid to the possibility of unauthorized discharge of hydrogen sulfide, etc., in occasional local incidents and damage to public health. In the event of such an accident, it is necessary to have government guidelines in place to investigate health impact and follow-up clinical management of exposed residents.

• Journal of Microbiology and Biotechnology
• /
• v.34 no.6
• /
• pp.1229-1238
• /
• 2024

This study aimed to develop and assess a chitosan biomedical antibacterial gel ZincOxide-GrapheneOxide/Chitosan/β-Glycerophosphate (ZnO-GO/CS/β-GP) loaded with nano-zinc oxide (ZnO) and graphene oxide (GO), known for its potent antibacterial properties, biocompatibility, and sustained drug release. ZnO nanoparticles (ZnO-NPs) were modified and integrated with GO sheets to create 1% and 3% ZnO-GO/CS/β-GP thermo-sensitive hydrogels based on ZnO-GO to Chitosan (CS) mass ratio. Gelation time, pH, structural changes, and microscopic morphology were evaluated. The hydrogel's antibacterial efficacy against Porphyromonas gingivalis, biofilm biomass, and metabolic activity was examined alongside its impact (MC3T3-e1). The findings of this study revealed that both hydrogel formulations exhibited temperature sensitivity, maintaining a neutral pH. The ZnO-GO/CS/β-GP formulation effectively inhibited P. gingivalis bacterial activity and biofilm formation, with a 3% ZnO-GO/CS/β-GP antibacterial rate approaching 100%. MC3T3-e1 cells displayed good biocompatibility when cultured in the hydrogel extract.The ZnO-GO/CS/β-GP thermo-sensitive hydrogel demonstrates favorable physical and chemical properties, effectively preventing P. gingivalis biofilm formation. It exhibits promising biocompatibility, suggesting its potential as an adjuvant therapy for managing and preventing peri-implantitis, subject to further clinical investigations.

• Journal of Environmental Health Sciences
• /
• v.50 no.4
• /
• pp.237-256
• /
• 2024

Background: Human health and environment exposure assessments of chemicals are essential part for REACH and BPR as well as K-REACH and K-BPR. Several useful exposure assessment tools have been developed and updated to become extensively used during more than fifteen years of chemical registrations under REACH and their updates are still going on. Objectives: Evolution of regulatory tools for environment, workers and consumers exposure assessments under REACH is investigated focusing on why and how tools have been developed and updated for the future regulatory tools in Korea. Methods: REACH regulatory tools including EUSES, ECETOC TRA and CHESAR as well as built-in models SimpleTreat and SimpleBox were chosen with other frequently used Tier 1 and 2 tools. Available resources such as homepage information, background documents, related scientific reports, relevant journal publications, up-to-date lists of new version publications, release notes and user guides were reviewed extensively and summarized using easy-readable Tables and Figures. Results: SimpleTreat and SimpleBox are built-in models both for EUSES and ECETOC TRA (Environment). ECHA's CHESAR contains ECETOC TRA (Workers) and ECETOC TRA (Consumers) as well as EUSES and ECETOC TRA (Environment) for environment exposure assessment while results of Tier 2 Stoffenmanager and ConsExpoWeb can be imported. Evolution of CHESAR from version 1 (2010) to 3.8 (2023) has focused on the compatibility of frequent updates of IUCLID, importing functionality, editability, updated use maps, harmonised conditions of use as well as updates of the built-in tools evolved according to scientific development, refinements of the tool, increased conservatism and user-friendliness. CHESAR Platform 1.0 will soon be published to serve both for REACH and BPR. Conclusions: Updates of the tools can be successfully continued by transparency of the tools, participation of industry sectors for tool refinements and tool developers'/authorities' encouragements of partners/users to jointly innovate tools through scientific researches, tool validations and user feedback.

• Korean Journal of Ecology and Environment
• /
• v.34 no.1 s.93
• /
• pp.20-29
• /
• 2001

The amount, chemical composition and optical property of extracellular dissolved organic carbon (EOC) by phytoplankton were examined using axenic cultures of Microcystis aeruginosa, Anabaena flos-aquae, and Oscillatoria agardhii. The extracellular organic matter was categorized into five fractions (hydrophobic acids; AHSs, hydrophobic neutrals; HoNs, hydrophilic acids; HiAs, hydrophilic bases; HiBs, and hydrophilic neutrals; HiNs) using three adsorbent resins(XAD-8, cation, and anion). The release pattern and chemical composition of EOC varied with algal species and their growth phases. Percentage of extracellular release increased with age in all cultures. HiAs were the dominant component of EOC in all cultures, whereas the proportion of HiAs decreased with age in all cultures. In contrast, the proportions of HiBs and HiNs increased as cultures aged. In particular, the HiN fraction increased from 0% to 44% of EOC in M. aeruginosa and from 3.0% to 28% in A. flos-aquae, respectively. The proportion of AHSs was higher in the cultures of A. flos-aquae(7.5${\sim}$16%) and O. agardhii (8.7${\sim}$16%) than M. aeruginosa(0.2${\sim}$2.5%). The proportions of AHSs increased with culture age in M. aeruginosa and O. agardhii, but decreased in A. flos-aquae. The specific UV absorbance also varied among species; 1.9 Abs${\cdot}$cm$^{-1}$/mgC${\cdot}$L$^{-1}$ for M. aeruginosa, 3.7 Abs${\cdot}$cm$^{-1}$/mgC${\cdot}$L$^{-1}$ for A. flos-aquae, and 13.0 Abs${\cdot}$cm$^{-1}$/mgC${\cdot}$L^{-1}$ for O. agardhii. The results of this study indicates that DOC excreted by three blue-green algae differed with species and the growth phase.

• The Korean Journal of Pharmacology
• /
• v.29 no.2
• /
• pp.213-223
• /
• 1993

To investigate the endothelium dependent vascular reactivity of the systemic arterial and the pulmonary arterial system in acute renal hypertensive rats of 2-kidney, 1-ligation type (RHRs), acetylcholine (ACh)-induced vasodilation and depressor effects were evaluated in isolated arteries and in vivo, respectively, in the presence and absence of functional endothelium. ACh $(10^{-5}\;M)$ relaxed the intact thoracic aortas from RHRs and normotensive rats (NRs), but the effect was significantly smaller for those from RHRs (34 and 86%, respectively, p<0.01). ACh-induced vasodilation was completely abolished after removal of endothelial cell or pretreatment with EDRF inhibitors, L-NAME and MB, indicative of its dependence on intact endothelial or EDRF function. ACh also induced vasorelaxation of the intact pulmonary arteries from RHRs and NRs; however, unlike the effects on the thorcic aorta, no significant difference in amplitude was noted between two groups. ACh $(0.1{\sim}10\;{\mu}g/kg,\;i.v.)$ reduced mean systemic arterial pressure in anesthetized RHRs and in NRs to the similar magnitude (% change: 39 and 46% at $10\;{\mu}g/kg$, respectively) and these hypotensive effects were significantly decreased after pretreatment with L-NAME (30 mg/kg, i.v.). Deprssor effects of ACh on mean pulmonary arterial pressure were similar in RHRs and NRs with and without pretreatment of L-NAME. However, in both NRs and RHRs, the depressor effects of ACh on mean pulmonary arterial pressure were significantly reduced compared with those for mean systemic arterial pressure, and the increment of mean pulmonary arterial pressure noted after L-NAME $(0.1{\mu}100\;mg/kg,\;i.v.)$ was significantly smaller than that for mean systemic arterial pressure. These results indicate that in RHRs the endothelial cell function was impaired, at least in part, in systemic arterial system, but not in pulmonary arterial system, and both ACh-evoked and basal release of EDRF was less in the pulmonary arterial system than in systemic arterial system of both NRs and RHRs.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.215-224
• /
• 1989

Electrochemical reductions of $trans-[Co(en)_2X_2](ClO_4)_n$ (where X is cyanide, nitrite, ammonia, and isothiocyanate) were investigated by cyclic voltammetry and polarography at mercury and glassy carbon electrode. $trans-[Co(en)_2(CN)_2]ClO_4$ was reduced to Co(II) complex followed by adsorption to the mercury electrode. Cyanide ion was not released from the reduced Co(II) complex but the cyanide and (en) were released after the reduction to metallic cobalt. The other complexes except $trans-[Co(en)_2(CN)_2]ClO_4$ were reduced to cobalt(II) complexes followed by release of monodendate ligand, and (en) was released at the reduction step to metallic cobalt. $trans-[Co(en)_2(NO_2)_2]ClO_4$ was reduced to cobalt(Ⅱ) complex, and $NO_2^-$ ion was released followed by electroreduction through ECE mechanism at pH 2. On glassy carbon electrode, all complexes of Co(III) were reduced to Co(II) complexes with irreversible one-electron diffusion controlled reaction in which (en) was not released at this step. Increasing absorption wave number of complexes caused to negative shift of peak potential.

• Journal of the Korean Chemical Society
• /
• v.50 no.6
• /
• pp.464-470
• /
• 2006

the coricosteroid drug dexamethasone is an efficacious antiinflammatory drug, it is difficult to formulate in an injectable formulation due to its poor aqueous solubility. A lipid-based nanosphere formulation containing dexamethasone was designed for solubilization of the drug in aqueous solution and sustained release of the drug from the nanosphere. The lipid nanospheres, composed of phospholipid, cholesterol and cationic lipid, were prepared by self emulsification-solvent diffusion method followed by diafiltration. Physicochemical characteristics such as mean particle diameter, zeta potential and drug loading efficiency of the lipid nanospheres were investigated according to the variation of either the kind of lipid or the lipid composition. The lipid nanospheres had a mean diameter 80-120 nm and dexamethasone loading efficiency of greater than 80%. The drug loading efficiency increased with the increase of the length of aliphatic chain attached to the phospholipid. However, the drug loading efficiency was inversely proportional to the increase of cholesterol content in the lipid composition. The lipid nanosphere could not be prepared without the use of cationic lipid and the drug loading efficiency was proportional to the increase of cationic lipid content. The lipid nanospheres containing dexamethasone are a promising novel drug carrier for an injectable formulation of the poorly water-soluble drugs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.24 no.7
• /
• pp.929-939
• /
• 2011

The effects of micronization on in situ and in vitro nutrient disappearances of wheat, barley and corn were investigated in a series of experiments. In Experiment 1, chemical composition and in situ dry matter disappearance (DMD) of six varieties of wheat were determined. In addition, an in vitro study was completed using ground micronized and unmicronized wheat (var. Kansas). In Experiment 2, three varieties of wheat (Kansas, Sceptre and Laura) and in Experiment 3, three cereal grains (wheat, barley and corn) were either micronized for 1 min to attain internal kernel temperatures of 90-100$^{\circ}C$ or not (controls), and DM, protein and starch disappearances were estimated. In Experiment 2, an in vitro study was also completed using ground micronized and unmicronized wheat (var. Kansas). Wheat samples varied with respect to crude protein (10.0-21.2%), starch (61.6-73.9%), NDF (8.5-11.8%), volume weight (753-842 g/L) and kernel hardness (0.0-32.0). Rate (p = 0.003) and extent (p = 0.001) of in situ DMD differed among wheat varieties. Correlations between in situ kinetics, and chemical and physical properties of wheat varieties showed that protein content was negatively correlated with the rate of disappearance ($r^2$ = -0.77). Micronization of all grains markedly reduced (p = 0.001) the rate and extent of DM, and protein disappearances as compared to control samples. Micronization increased (p<0.05) the digestion of starch in wheat. However, release of ammonia into the incubation medium was markedly reduced (p<0.05), suggesting that micronization increased the resistance of protein to microbial digestion. Disappearances of DM, protein and starch differed (p = 0.001) among cereal grains with wheat>barley>corn. Micronization reduced the rate of DM disappearance (p = 0.011) and slowly degradable protein fractions (p = 0.03), however, increased (p = 0.004) slowly degradable starch fractions of all three cereals. Examination of in situ samples by scanning electron microscopy confirmed that microbial colonization focused on starch granules in micronized grains, and that the protein matrix exhibited resistance to microbial colonization. These results suggest that micronization may be used to increase the ruminal escape value of protein in cereal grains, but may lead to increased starch digestion if grains are finely ground.