• Macromolecular Research
• /
• v.16 no.2
• /
• pp.139-148
• /
• 2008

Biodegradable and elastic poly(L-lactide-co-$\varepsilon$-caprolactone) (PLCL) was electrospun to prepare nanofibers, and N-isopropylacrylamide (NIPAAm) was then grafted onto their surfaces under aqueous conditions using $^{60}Co-{\gamma}$ irradiation. The graft yield increased with increasing irradiation dose from 5 to 10 kGy and the nanofibers showed a greater graft yield compared with the firms. SEM confirmed that the PLCL nanofibers maintained an interconnected pore structure after grafting with NIPAAm. However, overdoses of irradiation led to the excessive formation of homopolymer gels on the surface of thc PLCL nanofibers. The equilibrium swelling and deswelling ratio of the PNIPAAm-g-PLCL nanofibers (prepared with 10 kGy) was the highest among the samples, which was consistent with the graft yield results. The phase-separation characteristics of PNIPAAm in aqueous conditions conferred a unique temperature-responsive swelling behavior of PNIPAAm-g-PLCL nanofibers, showing the ability to absorb a large amount of water at < $32^{\circ}C$, and abrupt collapse when the temperature was increased to $40^{\circ}C$. In accordance with the temperature-dependent changes in swelling behavior, the release rate of indomethacin and FITC-BSA loaded in PNIPAAm-g-PLCL nanofibers by a diffusion-mediated process was regulated by the change in temperature. Both model drugs demonstrated greater release rate at $40^{\circ}C$ relative to that at $25^{\circ}C$. This approach of the temperature-controlled release of drugs from PNIPAAm-g-PLCL nanofibers using gamma-ray irradiation may be used to design drugs and protein delivery carriers in various biomedical applications.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.493-502
• /
• 2021

We prepared and investigated a biosynthesized nanoparticulate system with high adsorption and release capacity of letrozole. Silver nanoparticles (AgNPs) were biosynthesized using olive leaf extract. Cysteine was capped AgNPs to increase the adsorption capacity and suitable interaction between nanoparticles and drug. Morphology and size of nanoparticles were confirmed using transmission electron microscopy (TEM). Nanoparticles were spherical with an average diameter of less than 100 nm. Cysteine capping was successfully confirmed by Fourier transform infrared resonance (FTIR) spectroscopy and elemental analysis (CHN). Also, the factors of letrozole adsorption were optimized and the linear and non-linear forms of isotherms and kinetics were studied. Confirmation of the adsorption data of letrozole by cysteine capped nanoparticles in the Langmuir isotherm model indicated the homogeneous binding site of modified nanoparticles surface. Furthermore, the adsorption rate was kinetically adjusted to the pseudo-second-order model, and a high adsorption rate was observed, indicating that cysteine coated nanoparticles are a promising adsorbent for letrozole delivery. Finally, the kinetic release profile of letrozole loaded modified nanoparticles in simulated gastric and intestinal buffers was studied. Nearly 40% of letrozole was released in simulated gastric fluid with pH 1.2, in 30 min and the rest of it (60%) was released in simulated intestinal fluid with pH 7.4 in 10 h. These results indicate the efficiency of the cysteine capped AgNPs for adsorption and release of drug letrozole for breast cancer therapy.

• Biomaterials Research
• /
• v.22 no.4
• /
• pp.346-351
• /
• 2018

Background: Carbonate apatite ($CO_3Ap$) and silica-calcium phosphate composite (SCPC) are bone substitutes with good prospect for dental application. SCPC creates a hydroxyapatite surface layer and stimulate bone cell function while, $CO_3Ap$ induce apatite crystal formation with good adaptation providing good seal between cement and the bone. Together, these materials will add favorable properties as a pulp capping material to stimulate mineral barrier and maintain pulp vitality. The aim of this study is to investigate modification of $CO_3Ap$ cement combined with SCPC, later term as $CO_3Ap-SCPC$ cement (CAS) in means of its chemical (Calcium release) and physical properties (setting time, DTS and pH value). Methods: The study consist of three groups; group 1 (100% calcium hydroxide, group 2 $CO_3Ap$ (60% DCPA: 40% vaterite, and group 3 CAS (60% DCPA: 20% vaterite: 20% SCPC. Distilled water was employed as a solution for group 1, and $0.2mol/L\;Na_3PO_4$ used for group 2 and group 3. Samples were evaluated with respect to important properties for pulp capping application such as pH, setting time, mechanical strength and calcium release evaluation. Results: The fastest setting time was in $CO_3Ap$ cement group without SCPC, while the addition of 20% SCPC slightly increase the pH value but did not improved the cement mechanical strength, however, the mechanical strength of both $CO_3Ap$ groups were significantly higher than calcium hydroxide. All three groups released calcium ions and had alkaline pH. Highest pH level, as well as calcium released level, was in the control group. Conclusion: The CAS cement had good mechanical and acceptable chemical properties for pulp capping application compared to calcium hydroxide as a gold standard. However, improvements and in vivo studies are to be carried out with the further development of this material.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.5 no.6
• /
• pp.469-474
• /
• 2000

In order to enhance the degradation efficiency of waste activated sludge (WAS) by thermophilic aerobic digestion, an ultrasonic pretreatment was examined. It was observed that ultrasonic pretreatment increased the solubilization of organic matter in the WAS and that the solubilization ratio of the organics increased during the first 30 min but did not extensively increase thereafter. Therefore, a pretreatment time of 30 min was determined to be the economical pretreatment time from the experimental results. From the digestion experiments, which was conducted using the WAS collected from an oil refinery plant in Inchon, Korea, investigating the effects of an ultrasonic pretreatment on thermophilic aerobic digestion, it was confirmed that the proposed ultrasonic pretreatment was effective at enhancing the release of the cellular components in WAS and the degradation of released components in the thermophilic aerobic digestion.

• Microbiology and Biotechnology Letters
• /
• v.47 no.1
• /
• pp.96-104
• /
• 2019

Beauveria bassiana, one of the most common entomopathogenic fungi, has been isolated, pre defined and characterized in-house from soil of tea cultivation area. Experiments have been performed to verify the presence of chitinase as intracellular metabolite and its release as extracellular product rendering the spores with biopesticide activity. Although there are many responsible enzymes for the pest killer action of B. bassiana, binding property of chitinase depending on presence as well as absence of serine supplemented in the media has been studied with respect to the production and kinetics. A programmed investigation conclusively indicates that the isolated spore (hyphae) of B. bassiana has been metabolically enriched with the enzyme chitinase in presence of an externally added amino acid serine with its inhibitory kinetics.

• Journal of The Korean Society of Clinical Toxicology
• /
• v.13 no.2
• /
• pp.78-86
• /
• 2015

Purpose: The purpose of this study is to understand what kinds of chemical substances have been used annually and to investigate incidents that occurred due to chemical hazard release and to analyze statistically clinically chemical injury patients who visited one regional emergency medical center in Gumi city with documented references review. Methods: Annual chemical waste emission quantity (Kg/Year) (Cwep) was reproduced using national web site data governed by the Ministry of Environment and 5 years (from 1 .Jan. 2010 to 31. Dec. 2014) of medical records of chemical injury patients who visited our emergency department were reviewed retrospectively. By applying exclusion criteria, 446 patients of 460 patients were selected. Results: Dichloromethane, Toluene, Trichloroethylene, and Xylene were always included within Top 5 of Cweq. Six cases of chemical incidents were reported and in 3 of 6 cases involving Hydrogen fluoride were included during the study period. Male gender and twenties were the most prevalent group. Injury evoking chemicals were Hydrogen fluoride, unknown, complex chemicals (over 2 substances) in sequence. The most frequent site of wounds and injuries was the respiratory tract. Gas among status, intoxication among diagnosis, and discharge among disposition was most numerous in each group. Conclusion: There have been no uniform clinical protocols for chemical wounds and injuries due to various kinds of chemicophysical properties and ignorance of antidotes. Therefore conduct of a multicenter cohort study and experiments for ruling out chemicals according to chemicophysical priority as well as development of antidotes and clinical protocols for chemical injury patients is needed.

• Nuclear Engineering and Technology
• /
• v.47 no.5
• /
• pp.608-616
• /
• 2015

The migration of silver (Ag) in silicon carbide (SiC) and $^{110m}Ag$ through SiC of irradiated tristructural isotropic (TRISO) fuel has been studied for the past three to four decades. However, there is no satisfactory explanation for the transport mechanism of Ag in SiC. In this work, the diffusion coefficients of Ag measured and/or estimated in previous studies were reviewed, and then pre-exponential factors and activation energies from the previous experiments were evaluated using Arrhenius equation. The activation energy is $247.4kJ{\cdot}mol^{-1}$ from Ag paste experiments between two SiC layers produced using fluidized-bed chemical vapor deposition (FBCVD), $125.3kJ{\cdot}mol^{-1}$ from integral release experiments (annealing of irradiated TRISO fuel), $121.8kJ{\cdot}mol^{-1}$ from fractional Ag release during irradiation of TRISO fuel in high flux reactor (HFR), and $274.8kJ{\cdot}mol^{-1}$ from Ag ion implantation experiments, respectively. The activation energy from ion implantation experiments is greater than that from Ag paste, fractional release and integral release, and the activation energy from Ag paste experiments is approximately two times greater than that from integral release experiments and fractional Ag release during the irradiation of TRISO fuel in HFR. The pre-exponential factors are also very different depending on the experimental methods and estimation. From a comparison of the pre-exponential factors and activation energies, it can be analogized that the diffusion mechanism of Ag using ion implantation experiment is different from other experiments, such as a Ag paste experiment, integral release experiments, and heating experiments after irradiating TRISO fuel in HFR. However, the results of this work do not support the long held assumption that Ag release from FBCVD-SiC, used for the coating layer in TRISO fuel, is dominated by grain boundary diffusion. In order to understand in detail the transport mechanism of Ag through the coating layer, FBCVD-SiC in TRISO fuel, a microstructural change caused by neutron irradiation during operation has to be fully considered.

• Korean Journal of Soil Science and Fertilizer
• /
• v.38 no.5
• /
• pp.269-273
• /
• 2005

A field experiment was conducted to evaluate the effect of slow-release fertilizer on the yield and quality of the third-harvest tea leaves. The yield of the third harvested tea leaves was decreased to 5.8-14.4% in slow-release fertilizer block, except to the N $50kg\;10a^{-1}$ ($316kg\;10a^{-1}$), compared to traditional urea treatment ($313kg\;10a^{-1}$). Nitrogen uptake and nitrogen uptake efficiency of slow-release fertilizer was reduced as nitrogen application level increased. The contents of chemical components related to the tea quality such as total-nitrogen, total amino acid, chlorophyll and theanine were somewhat lower in the slow-release fertilizer treatments, except to the treatment of N $50kg\;10a^{-1}$, than those in the traditional urea application, but those of tannin, caffeine and vitamin C were not different among the treatments. In scoring test, apparence and quality of green tea of the slow-release fertility treatments were not different, except to the N $40kg\;10a^{-1}$ treatment, compared to those in the treatment of urea. In conclusion, slow-release fertilizer and conventional urea treatments showed not different in both yield and quality of green tea.

• 한국생물공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.580-583
• /
• 2005

The aim of this study was to prepare a hydrogels composed of alginate blended with a carboxymethyl scleroglucan (CMSC) and evaluate the feasibility of the hydrogels as a drug delivery system for a protein. The main advantage of the alginate/CMSC hydrogels is to improve a restricted drug release from alginate hydrogels. The CMSC was chemically synthesized with chloroacetic acid and confirmed using a FT-IR. The alginate/CMSC hydrogels were prepared at distinct compositions by crosslinking with calcium ions. The swelling ratios of these hydrogels increased significantly with increasing the content of CMSC. At pH 7.4, the swelling ratios of the hydrogels increased remarkably as compared to those at pH 1.2. In ovalbumin (OVA) release test, the amount of OVA released from the hydrogels showed higher as compared to those released at pH 1.2. In addition, the release of OVA was improved with increasing the content of CMSC. Thus, the alginate/CMSC hydrogels may be used as a potential system for oral delivery of protein drugs.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.63-66
• /
• 2008

Not only mechanical properties, bonding properties, electro chemical properties, etc. but also fire safety is required in patch repair materials such as polymer modified cement mortar (PCM) which are used to deteriorated reinforced concrete structure. Unfortunately, it is very difficult to choice the appropriate repair materials because there are not enough information about fire safety properties of PCM. In this study, The combustion characters of PCM were evaluated through the heat release rate test and non-combustibility test. The pyrogenicity test uses the cone calorimeter based on the oxygen consumption method. The non-combustibility test is from the temperature change inside the furnace during the test. The effect of the types of polymer and polymer content were evaluated from the series of test. The results are like followings. 1) The higher the W/C of PCM, the lower the gross calorific value and heat generation rate in the heat release rate test. The amount of heat generation of PCM is like the order of VVA, EVA, and SBR in this study. 2) Some materials such as E45-100, E50-100, E60-100, S50-50, and S50-100 were estimated as not appropriate building materials in the non combustibility test.