• 한국안전학회지
• /
• 제32권2호
• /
• pp.59-65
• /
• 2017

Calculation of the damage impact of chemical accidents is an important element in site, and the initial isolation distance and the protective action distances are significant factors in coping the chemical accident. In this study, three major cities that represent each Province were selected, and the safety distances were calculated considering regional climate conditions. The results were compared with the prescribed values in Emergency Response Guidebook. It is concluded that the regional meteorological conditions such as temperature, vapour pressure, relative humidity, wind speed, and cloud cover should be reflected in estimating the initial isolation distance and the protective action distance.

• Journal of Microbiology and Biotechnology
• /
• 제5권4호
• /
• pp.218-223
• /
• 1995

Veratryl alcohol which has been reported as an inducer for lignin peroxidase showed different effects on the enzyme biosynthesis in Phanerochaete chrysosporium depending on the addition time. Enzyme expression was optimally induced by adding veratryl alcohol when the carbon source began to be depleted. Hydrogen peroxide, to some extent, stimulated production of lignin peroxidase, but beyond a certain concentration, inactivated lignin peroxidase. Tween 80 induced the formation of small pellets, which were resistant to the deactivation by shear stress. Lignin peroxidase production was increased twice compared with that of the control by adopting all the optimal factors in the culture system.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.421-421
• /
• 2012

Graphene has drawn enormous attention owing to its outstanding properties, such as high charge mobility, excellent transparence and mechanical property. Synthesis of Graphene by chemical vapor deposition (CVD) is an attractive way to produce large-scale Graphene on various substrates. However the fatal limitation of CVD process is high temperature requirement(around $1,000^{\circ}C$), at which many substrates such as Al substrate cannot endure. Therefore, we propose plasma enhanced CVD (PECVD) and decrease the temperature to $400^{\circ}C$. Fig. 1 shows the typical structure of RF-PECVD instrument. The quality of Graphene is affected by several variables. Such as plasma power, distance between substrate and electronic coil, flow rate of source gas and growth time. In this study, we investigate the influence of these factors on Graphene synthesis in vacuum condition. And the results were checked by Raman spectra and conductivity measurement.

• 한국작물학회지
• /
• 제47권
• /
• pp.163-174
• /
• 2002

Peanut is one of the principal oil seeds in the world as a rich source of edible oil and protein. Peanut quality arises as a result of a complex interaction of genetic, physiological and biochemistry processes that produce the chemical composition of the peanut seed. The major factors influencing seed quality are degree of maturity and digging and drying, curing and storage as a series of harvesting. The end products, peanut butter, salted seed, confections, roasting stock and by-products are favored in world-wide because of their unique roasted peanut flavor, Literatures are reviewed mainly focusing on the physiological properties and nutritional quality of oil, protein and flavor in peanut. Chemical properties of protein and oil, and volatile flavor component in peanut seeds are studied. The objectives of this paper were to review and summarize the results obtained from the improving quality breeding program and evaluation of the chemical composition in peanut up to now.

• Nuclear Engineering and Technology
• /
• 제15권1호
• /
• pp.11-22
• /
• 1983

가압 경수로의 노 냉각수 제어계통의 신뢰도를 해석하였다. 이 신뢰도 해석에서 붕소주입실패를 상위사고로 설정하였다. 신뢰도 해석은 고장계통도를 작성한 후 이 고장 계통도로부터 최소절군을 구하였다. 붕소주입실패에 의한 노 냉각수 제어계통의 불가용성은 1.497$\times$$10^{-5}$으로 계산되었다. 노 냉각수 제어계통의 불가용성에 가장 중요한 영향을 미치는 것은 붕산전달펄프의 신뢰도이며, 인간의 실수 역시 계통 신뢰도에 중요한 인자임이 나타났다.

• 대한화학회지
• /
• 제7권2호
• /
• pp.144-152
• /
• 1963

브리스톨釉藥을 콘 5, 8, 11 番으로 燒成했을때 나타나는 狀態에 對한 組成變化와 粒度의 京鄕을 硏究하여, 밝은 半艶消 또는 艶消釉藥을 얻을 수 있었다. 卽 各 釉藥에 對한 熱成範圍, 曲强度 및 光澤, 平滑性, 乳白度, Eggshelling, 龜裂, Pinholing, Crawling 等에 對한 因子를 決定하므로서 얼마나, 珪酸, 알카리, 石灰를 變化시켜 實際 使用可能한 良好한 釉藥을 얻었다. 製造된 브리스톨釉藥은 最低 콘 5番부터 11번 또는 그 以上에서 긴 熟成範圍를 나타냈다. Crawling의 傾向에 있어서는 ZnO 量이 增加될때 特히 甚했으나, $Al_2O_4:\;SiO_2$의 比가 크고 ZnO 量이 많을때 乳白度가 顯著하였다. 釉藥의 粒子를 가늘게 하면 熱成이 잘되나 微粒이면 Crawling이 커진다. 釉藥두께를 增加해도 Crawling 傾向이 커진다.

• Korean Membrane Journal
• /
• 제4권1호
• /
• pp.12-19
• /
• 2002

Nanofiltration of aqueous dye solutions was carried out using polyamide (PA) nanofiltration (NF) composite membranes. The PA composite membranes were prepared by the interfacial polymerization of piperazine (PIP) and trimesoyl chloride (TMC) on the surface of microporous polysulfone (PSf) ultrafi1tration (UF) membranes. After characterization in terms of their permeation performance and surface ionic property, they were used for the separation of dye solutions such as Direct Red 75, 80, 81, and Direct Yellow 8 and 27. The separation conditions were varied to study the factors affecting on the permeation performance of the membranes: different concentrations of dye solutions, operating temperature and time, and flow rate of a feed solution. The surface property of the membrane, especially its ionic property, as a function of operating time was examined with a zeta-potentiometer and the relationship between the surface chemistry of the membrane and its permeation properties was also studied.

• Korean Membrane Journal
• /
• 제5권1호
• /
• pp.54-60
• /
• 2003

The rejection properties and flux rates of silica nanoparticles in ultrafiltration membranes has been investigated. Cross-flow permeation experiments were conducted using polycarbonate track-etch flat membranes with pore sizes of 30 and 50 nm, and a silica nanoparticle solute with particle sizes of 5 and 18 nm with narrow size distributions. The fluxes and rejection factors were investigated at various particle concentrations, cross-flow velocities, pH, and ionic strengths of solution. Even though the size of the silica nanoparticles was much smaller than that of the membrane pores, the observed rejection rates were very high compared with those for a similar-sized polymer (dextran). The observed rejection rate decreased with increasing ionic strength, which implies that the transport mechanism of the silica nanoparticles is significantly influenced by electrostatic repulsion between particles and membranes.

• Journal of Microbiology and Biotechnology
• /
• 제5권3호
• /
• pp.172-176
• /
• 1995

Citrate is mainly produced from fungi and oxygen transfer has been known as one of the important factors in citric acid production. A bubble column bioreactor was used for citrate production after pellet was initially made using a stirred bioreactor for the inoculation. The relationship between the pellet size of Aspergillus niger and the oxygen transfer was elucidated by considering morphological characteristics of the pellet. The pellet size was determined by adjusting the impeller speed in the stirred bioreactor and the optimum diameter of the pellet was observed to be 2.2 mm under the experimental conditions. Pellet was maintained quite stable in the bubble column bioreactor and production of citric acid was significantly improved by maintaining optimal pellet conditions in the bubble column bioreactor.

• 한국신뢰성학회지:신뢰성응용연구
• /
• 제17권2호
• /
• pp.103-111
• /
• 2017

Purpose: Accelerated degradation tests can speed time to market and reduce the test time and costs associated with long term reliability tests to verify the required service life of a product or material. This paper proposes a service life prediction method for components or materials using an accelerated degradation tests based on the relationships between temperature and the rate of failure-causing chemical reaction. Methods: The relationship between performance degradation and the rate of a failure-causing chemical reaction is assumed and least square estimation is used to estimate model parameters from the degradation model. Results: Methods of obtaining acceleration factors and predicting service life using the degradation model are presented and a numerical example is provided. Conclusion: Service life prediction of a component or material is possible at an early stage of the degradation test by using the proposed method.