• Composites Research
• /
• v.12 no.4
• /
• pp.71-78
• /
• 1999

To determine the effect of chemical structure of linear amine curing agents on thermal and mechanical properties, standard epoxy resin DGEBA was cured with diaminodiphenyl methane (DDM), diaminodiphenyl sulphone (DDS) in a stoichiometrically equivalent ratio. From this work, the effect of aromatic amine curing agents. In contrast, the results show that the DGEBA/DDS cure system having the sulfone structure between the benzene rings had higher values in the conversion of epoxide, density, shrinkage (%), glass transition temperature, tensile modulus and strength, flexural modulus and strength than the DGEBA/DDM cure system having methylene structure between the benzene rings, whereas the DGEBA/DDM cure system presented higher values in the maximum exothermic temperature, thermal expansion coefficient, and thermal stability. These results are caused by the relative effects of sulfone group having strong electronegativity and methylene group having (+) repulsive property and stem from the effect of the conversion ratio of epoxide group. The result of fractography shows that the each grain size of the DDM/DGEBA system with feather-like structure is larger than that of the DDS/DGEBA system.

• Korean Journal of Soil Science and Fertilizer
• /
• v.25 no.4
• /
• pp.325-333
• /
• 1992

An investigation was carried out to find out the effects of long-term application (14 and 28 years) of rice straw, compost and wheat straw on changes in soil chemical and physical properities, aspests of releasing potential nitrogen and nitrogen uptake by rice and maize from fine textured paddy soils with double cropping system in warm temperate area. The result obtained were summarized as follows : 1. The long-term application of organic matters improved plow layer and soil physical properties : bulk density and solid phase were decreased, while porosity and gaseous phase were decreased. 2. Average increment of total carbon per year was 0.0371% and 0.0407% for rice straw and compost, respectively, from 1 through 14 years ; it was 0.0007% and 0.0014% for the rice straw and compost, respectively, from 15 years through 28 years. The average increment of total notrogen per year was 0.0025% and 0.038% for the rice straw and compost, respectively, from 1 through 14 years ; 0.0014% and 0.0024% for the same treatments from 15 through 28 years. 3. $NH_4-N$ and amide-N were high in the soils with wheat straw application for 28 years ; the amino sugar-N in the soils with compost application for 28 years ; amino acid -N in the soils with rice straw application for 14 and 28 years ; and unidentified-N, in the control. 4. The released amount of available nitrogen with the submerged condition was higher at $30^{\circ}C$ than at $25^{\circ}C$ during the incubation. The amount of released available nitrogen at the field was aproximately same as that of $25^{\circ}C$ incubation. However, the released amounts from the incubation and the field were always lower than those extracted with reagents. 5. The amount of nitrogen uptake by rice and maize was highly correlated with available nitrogen extracted with phosphate buffer(pH 7.0). 6. The ratio of yield increase(milled rice) was 17, 12 and 7%, respectively, by application of rice straw, compost and wheat straw for 28 years, and 11% by application of rice straw for 14 years.

• Applied Biological Chemistry
• /
• v.14 no.2
• /
• pp.121-129
• /
• 1971

During the Brewing of Soy Sauce on an industrial scale, Saccharomyces rouxii $T_9$ was cultured and added to the soy sauce mash. The comparative experiments of soy sauce mash in non-addition and addition group of yeast were examined in this report. The yeast flora and chemical composition of Soy sauce mash through out the brewing were observed and the results obtained were as follows. (1) The number of Osmophilic yeast in one ml of soy sauce mash showed $185{\times}10^3$ 1 month after mashing and $750{\times}10^3$ 4 months after mashing in case of yeast group, while presented as $98{\times}10^3$ 1 month after mashing and $394{\times}10^3$ 4 months after mashing in case of non-yeast group. And the number of Osmphilic yeast in yeast group was twice of that in non-yeast group. (2) The number of ordinary yeast of TTC red group was shown as $2132{\times}10^3\;to\;3252 ×10^3$ 5 to 6 months after mashing in case of yeast group, while presented $752{\times}10^3\;to\;1251{\times}10^3$ in case of non-yeast group. And the yeast group was shown more than non-yeast group in ordinary, red pink and pink yeast number. (3) TTC red yeast were strongly appeared in both addition and non-addition group of yeast from 1 month after mashing to 6 months after mashing. (4) Though total nitrogen, pure extract, pH and buffer action contents of soy sauce showed similiar tendency in yeast and non-yeast group, alcohol and color density contents were highly appeared in yeast group and reducing sugar content was in non-yeast group respectively. (5) By the results of Organic function test of soy sauce mash, the difference of taste quality in yeast and non-yeast group were not evidently appeared, however, the appearance and flavour of the soy sauce were better in yeast group than in non-yeast group.

• Korean Journal of Environmental Agriculture
• /
• v.13 no.2
• /
• pp.223-230
• /
• 1994

A practical study on a drying and fermentation system equipped with a stirring machine operated mechanically, of pig manure was conducted to prove the efficiency of and practicability to an ordinary pig farm. The type of the drying bed was a round-shaped (r=3m) concrete structure and the stirring machine was adopted to stir and transfer dried pig manure to the fermentation tank. The dried pig manure was put into a fermentation tank ($V=18m^3$), which was aerated from pipe lines installed at the bottom. While water content of pig manure passing through a drying bed was remarkably reduced than before drying, the drying efficiency of this system decreased in winter. However, the temperature of pig manure piled up in the fermentation room in winter reached over $60^{\circ}C$ and excess water of pig manure was removed during the fermentation process. The reduction rate of water content of pig manure, to which dried pig manure was added as bulking material on the drying bed, was 52.1%, but when dried without bulking material it was only 19.7%. Although the content of $P_2O_5$ of dried pig manure was slightly higher than that of fresh pig manure, progressive changes in chemical composition between fresh and dried pig manure made no great difference. Among the contents of minerals of fresh and dried pig manure, CaO was the highest and the rest were in the decreasing order of $K_2O$, MgO, and $Na_2O$. Population density of E. coli and Streptococci of dried pig manure was reduced by 142 and 236 times that of fresh pig manure, respectively. The installation cost of this drying and fermentation system was 4,185,630 won (approximately 5,232 US $) and operating cost per year was 190,000 won (237.5US $) on the basis of self-labor condition.

• Journal of Food Hygiene and Safety
• /
• v.32 no.1
• /
• pp.1-7
• /
• 2017

This study was conducted to investigate the microbial loads in mulberry fruits depending on cultivation environment and fruit ripeness. The population levels of total aerobic bacteria in mulberry fruits collected from open field orchards were higher than those from three plots protected within plastic green houses. In regards to fruit ripeness, the levels of total aerobic bacteria in ripe black fruits were higher than those in unripe green and red mulberry. From the farms into where livestock animals were allowed to enter, Escherichia coli was detected in soil at a level of 4.26~4.94 log CFU/g and in mulberry fruits at 5.03~6.07 log CFU/g, while no coliform and E. coli were detected from where the intrusion of livestock was prevented. We also examined the density change of inoculated E. coli in mulberry fruits as they were becoming mature. While E. coli did not increase in green fruits, two and four log CFU/g increases at $20^{\circ}C$ and $37^{\circ}C$, respectively, were observed with red and fully mature black mulberries during 48 hours incubation. To ensure the food safety of mulberry, it is suggested that the introduction of E. coli into a farm through livestock should be prevented and more hygienic caution should be taken especially when the fruits are ripe.

• Current Research on Agriculture and Life Sciences
• /
• v.17
• /
• pp.21-29
• /
• 1999

This study was carried out to determine the promising method for the production of mother bulbs using garlic bulbs at the experimental field of Ange high school, Eusung in Korea from 1996 to 1998. The bulbs and bulbils were taken from a local cultivar 'Eusung' garlic. The growth of bulbil and yield potential were compared with different harvesting times and cultivation methods of bulbil. The harvesting time of bulbils which were capable of producing the mother bulbs was ranged from 15 days to 30 days after the emergence of flower stalks. The best results based on the yield and number of bulbs were obtained from the bulbils sampled at the just before garlic harvesting, 30 days after flower-stalk emergence. The mulching with transparent polyethylene(PE) film in bulbil cultivation was more effective for the plant growth and bulb formation than that with black PE film. The PE mulching from 30 days after seeding of bulbils to 30 days (late-April) before bulb harvesting was the moot effective for the increase of bulb yield. In the cultivation of garlic bulbils, application of lime (150 kg/10a) and compost (3,000 kg/10a) without any chemical fertilizers produced more bulbs in comparison with the standard level of fertilizer (N - $P_2O_5$ - $K_2O$ - compost - lime = 24.8 - 8.0 - 19.2 - 3,000 - 150 kg/10a). It was determined that the involucre seeding and assemble seeding of bulbils was effective and labour-saving methods for the production of mother bulbs from garlic bulbils. Input of labour force for the involucre seeding was decreased up to 61% as compared with the conventional drill seeding of bulbils. Mean yield from the cultivation of bulbil-derived single cloves was remarkably increased up to 95% in comparison with that of the common cloves. The larger size of single clove produced more yields, and the optimum planting density of single clove was $20{\times}10cm$. The cloves differentiated directly from bulbil showed to have higher yield potential than that from common cloves.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.1
• /
• pp.48-59
• /
• 2018

This study was conducted to suggest the effective management and recycling processes of coffee waste, which can be easily obtained from coffee shops and coffee-related products industries. Prior to the fabrication of pellets, the potential of coffee waste as a raw material of pellet was investigated through the examination of its chemical compositions and fuel characteristics. Major gradient included in coffee waste was holocellulose, followed by fat/oil and protein. Coffee waste contained a small quantity of ash (0.7%), such as calcium, sodium, potassium and magnesium. Interestingly, coffee waste was easily dried probably due to its porous structure. Pellets fabricated with coffee waste and larch sawdust showed good fuel characteristics, such as moisture content, ash content, density and durability. The pellets exceed greatly the minimum requirements of $1^{st}$-grade wood pellet standard designated by National Institute of Forest Science (NIFOS). Particularly, the high calorific value of coffee waste showed the potential as a raw material of pellet. However, owing to high nitrogen and sulfur contents, coffee waste is like to be used as a raw material of wood pellet for combined heat and power plants equipped with a reduction system of $NO_x$ and $SO_x$ gases. On the other hand, 91 wt% larch sawdust and 9 wt% coffee waste are required to fabricate the $1^{st}$-grade wood pellets designated by NIFOS. Pellets fabricated with the conditions are estimated to have nitrogen content of 0.298% and sulfur content of 0.03%. Lastly, if amounts of coffee waste and sawdust in the production of wood pellets are adequately adjusted according to its purchasing price, the manufacturing cost of pellet can effectively be reduced. In addition, it is expected tp prepare the effective recycling process of waste and to relieve the environmental burden with the reduction of waste from the commercialization of coffee waste/larch pellets.

• Korean Journal of Soil Science and Fertilizer
• /
• v.21 no.4
• /
• pp.373-379
• /
• 1988

This experiment was carried out to investigate the effects of long-term applications of rice straw and compost on the physical and mechanical properties of paddy fields and the yearly variation of rice yield in Fluvio-Marine plain of Jeonbug series. Amounts of rice straw and compost applied in this experiment were 500kg/10a, 1,000kg/10a respectively, and the nitrogen levels were 0, 15 and 20kg/10a. This experiment were continued for 9 years from 1979 to 1987. The results are summarized as follows: 1. Clay and silt ratios were decreased but versa in sand ratio, by the long-term application of rice straw and compost. 2. Bulk density in the long-term application of organic matter was lower in surface soil of non-application than nitrogen application (15kg/10a) and in rice straw than compost. 3. Solid ratio went down, but liquid and gaseous ratio went up especially, by organic matter application liquid ratio were increased by compost and gaseous ratio were increased by in rice straw. 4. Aggregates of bigger than 2mm were increased by long-term application of organic matter, and the effects was better in rice straw than compost. Accumulative aggregate of 2mm was 66.5% in nitrogen of 15kg/ 10a with rice straw, which showed the increase of 9.1% in comparison with the non-application of nitrogen and organic matter. 5. Liquid limit, plastic limit and plastic index were high in order of rice straw, compost and control, and liquid index was lower in compost than in rice straw. 6. Cole value was higher in vertical than horizontal and highest in the application of rice straw with nitrogen of 15kg/10a. Cone and shearing resistance were lowest in the application of rice straw with nitrogen. In total vertical pressure friction was higher in the long-term application of organic matter than control. 7. The change of yield index was higher in the long-term application of compost than rice straw in non-nitrogen and it showed the yearly competitive variation between the long-term application of compost and rice straw in nitrogen of 10kg/10a. In nitrogen application of 20kg/10a, it was increased from 6th year by rice straw application.

• KSBB Journal
• /
• v.24 no.1
• /
• pp.1-8
• /
• 2009

In the past decade, we have observed rapid advances in the development of biochips in many fields including medical and environmental monitoring. Biochip experiments involve immobilizing a ligand on a solid substrate surface, and monitoring its interaction with an analyte in a sample solution. Metal nanoparticles can display extinction bands on their surfaces. These charge density oscillations are simply known as the localized surface plasmon resonance (LSPR). The high sensitivity of LSPR has been utilized to design biochips for the label-free detection of biomolecular interactions with various ligands. LSPR-based optical biochips and biosensors are easy to fabricate, and the apparatus cost for the evaluation of optical characteristics is lower than that for the conventional surface plasmon resonance apparatus. Furthermore, the operation procedure has become more convenient as it does not require labeling procedure. In this paper, we review the recent advances in LSPR research and also describe the LSPR-based optical biosensor constructed with a core-shell dielectric nanoparticle biochip for its application to label-free biomolecular detections such as antigen-antibody interaction.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.1
• /
• pp.39-45
• /
• 2009

Statement of problem: Recently precalcification treatment has been studied to shorten the period of the implant. Purpose: This study was performed to evaluate the effect of precalcification treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy. Material and methods: Specimens of $20{\times}10{\times}2\;mm$ in dimensions were polished sequentially from #220 to #1000 SiC paper, ultrasonically washed with acetone and distilled water for 5 min, and dried in an oven at $50^{\circ}C$ for 24 hours. The nanotubular layer was processed by electrochemical anodic oxidation in electrolytes containing 0.5 M $Na_2SO_4$ and 1.0 wt% NaF. Anodization was carried out using a regulated DC power supply (Kwangduck FA, Korea) at a potential of 20 V and current density of $30\;㎃/cm_2$ for 2 hours. Specimens were heat-treated at $600^{\circ}C$ for 2 hours to crystallize the amorphous $TiO_2$ nanotubes, and precalcified by soaking in $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. To evaluate the bioactivity of the precalcified $TiO_2$ nanotube layer, hydroxyapatite formation was investigated in a Hanks' balanced salts solution with pH 7.4 at $36.5^{\circ}C$ for 2 weeks. Results: Vertically oriented amorphous $TiO_2$ nanotubes of diameters 48.0 - 65.0 ㎚ were fabricated by anodizing treatment at 20 V for 2 hours in an 0.5 M $Na_2SO_4$ and 1.0 NaF solution. $TiO_2$ nanotubes were composed with strong anatase peak with presence of rutile peak after heat treatment at $600^{\circ}C$. The surface reactivity of $TiO_2$ nanotubes in SBF solution was enhanced by precalcification treatment in 0.5 M $Na_2HPO_4$ solution for 24 hours and then in saturated $Ca(OH)_2$ solution for 5 hours. The immersion in Hank's solution for 2 weeks showed that the intensity of $TiO_2$ rutile peak increased but the surface reactivity decreased by heat treatment at $600^{\circ}C$. Conclusion: This study shows that the precalcified treatment of $TiO_2$ Nanotube formed on Ti-6Al-4V Alloy enhances the surface reactivity.