• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.631-637
• /
• 1999

An investigation was carried out to study the effects of aging time, storage temperature, and drying type on the physical, chemical and sensory properties of Korean rice cake. Water content and cooking properties were significantly influenced by aging time and storage temperature. However, aging time did not affect the soup turbidity. Difference in water content was noticeable by drying type. The microwave treated rice cake (MW) showed a higher water content than the other ones. The lightness (L-value) was not affected by the aging time and drying type. Rice cake storaged at 4oC showed the highest L-value. The textural properties of rice cake were influenced by the all sources of variables. There was a significant difference in hardness between microwave and hot air treated rice cake (MWH), and microwave and vacuum treated rice cake (MWV). In the sensory properties, mean intensities of all attributes except chewiness were significantly different among drying types. The MWV showed a higher acceptability than the MW and the MWH. Scanning electron photomicrographs revealed that the MWV has more porous structure. The MWV was the most desirable one as determined by the physical, chemical and sensory evaluation.

• Korean Journal of Food Science and Technology
• /
• v.17 no.4
• /
• pp.253-257
• /
• 1985

Effects of four kinds of phosphate complex on the water holding capacity (W.H.C) and protein solubility of yellow-corvenia (Pseudosciance manchurica) and hair tail (Tichurus lepturus) meat paste were investigated. The formulations of four kinds of phosphate complex employed to this experiment were made by mixing several phosphates such as sodium polyphosphate, sodium pyro-phosphate, sodium acid pyro-phosphate, potassium pyro-phosphate, sodium tetra meta-phosphate, sodium ultra meta-phosphate and sodium hexa meta-phosphate, and monoglyceride at different mixture ratios. Among the four kinds of phosphate complex, phosphate B complex which was formulated by mixing sodium poly-phosphate 50%, sodium pyrophosphate 20%, sodium tetra meta-phosphate 20%, sodium acid pyrophosphate 5% and sodium ultra meta-phosphate 5% was most effective on enhancing the W.H.C and protein solubility of yellow corvenia meat paste, and in case of hair tail meat paste, phosphate C complex which was formulated by mining sodium poly-phosphate 40%, sodium pyro-phosphate 30%, potassium pyro-phosphate 15%, sodium tetra meta-phosphate 10%, and sodium hexa meta-phosphate 5% was more effective than other phosphate complex, and their optimum addition level was 0.4% respectively in weight of fish meat paste. Texture characteristics such as hardness, cohesiveness, and springiness value of Kamaboko (fish meat paste product) were evaluated as best when 0.3% of phosphate B complex was added. The optimum cooking condition of Kamaboko to get good texture was heating for 45 mimutes at $85^{\circ}C$.

• Fire Science and Engineering
• /
• v.30 no.1
• /
• pp.111-120
• /
• 2016

This study is intended to provide legislative direction for fire products life expectancy. Domestic and international laws relating to fire products life expectancy have been reviewed, and the results of a Fire Safety Manager Consciousness (FSMC) survey were analyzed. The FSMC survey has been designed in order to assist with the establishment of appropriate fire safety policy. A questionnaire survey was conducted with 660 fire safety administrators from 17 municipal and provincial districts, with the intention of gaining expertise on the extension of life-span for 32 fire products. The survey also asked for candidates opinions on future policy direction. Based on the survey results and the review of policies within other nations, we have devised a set of policy issues with the intention of extending the life-span of fire-safety items. The survey result revealed that 79.3% of Fire Safety Managers (FSMs) concurred with the establishment of legislation regarding the maintenance and correct care of fire-safety products. Overall, over 30% of FSMs were in favor of regulations regarding Ddry chemical fire extinguishers (77.3%), fire detectors (44.6%), fire hoses (44.4%), gaseous agent fire extinguisher (40.6%), automatic descending life lines (36.2%), exit lights (35.9%), air respirators (35.9%), extinguishing systems for residential cooking facilities (33.9%), automatic spray-type extinguishing units (33.9%), emergency lights (31.2%), and gas leakage detectors (30.7%). Especially, among these, dry chemical fire extinguishers (60.0%), detectors (20.0%), and fire hose (18.8%) were identified as the fire products primarily in need of maintenance legislation. The general consensus is that fire products older than 10 years need to be replaced. Based on the survey results, there was general agreement that fire product life expectancy is in need of legislation. This study recommends the introduction of fire product life expectancy legislation in phases.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.29 no.3
• /
• pp.242-253
• /
• 1984

Four different levels of nitrogen were applied to 3 naked barley cultivars (Hordeum vulgare L.) Yonezawa, Baekdong and Yeongsanbori. Changes in physico-chemical properties were examined upon these treatments. Total protein content as well as glutelin increased as N level increased. Baekdong contained the highest protein content (13.7%) at N$_2$. Yonezawa and Baekdong contained more lysine than Yeongsanbori. Increased lysine was measured in all cultivars by increased nitrogen application. Among all amino acids proline was the highest in all cultivars, and its increase was paralled to the N levels. Magnesium and potassium were declined and calcium was increased with increased levels of nitrogen fertilizer. Ash content was decreased as nitrogen increased and as the plants have become matured. Three minutes pearling in Yonezawa was not sufficient in terms of water absorption ratio and whiteness. Sixty percent pearling rate in Yonezawa showed a higher absorption ratio and cooking whiteness than non-waxy Baekdong and Yeongsanbori. Gelatinization temperature was lower but maximum viscosity was higher in waxy than non-waxy barley.

• Korean Journal of Food Science and Technology
• /
• v.35 no.3
• /
• pp.335-341
• /
• 2003

The physicochemical characteristics and chemical compositions of six Korean traditional soybeans were studied namely, cheongtae, seoritae, jinjoori, subaktae, yutae and huktae. The characteristics of imported soybean were also investigated for comparison. The average weight of one hundred-seed for huktae, which is normally used as nutritional supplement by adding to rice during cooking, was 43.1 g. The average whole length and long and short width for six varieties of the bean were $5.68{\sim}10.15\;mm$, $5.10{\sim}9.33\;mm$ and $4.30{\sim}7.48\;mm$, respectively. Color of cheongtae and subaktae were green, while that of seoritae, jinjoori, and huktae were black with yutae having yellow seed coat. Moisture, crude fat, crude protein and ash content of soybean seeds were all in the ranges of $8.5{\sim}11.5%$, $14.0{\sim}20.8%$, $38.0{\sim}49.2%$ and $4.2{\sim}5.0%$, respectively, showing differences among cultivars. Methionine, cysteine and histidine were the minor components of soybean protein and percentage of methionine to the total proteins showed significant varietal differences. Subaktae contained the highest content of methionine with 4.0 mg/g protein, while jinjoori the lowest with 1.8 mg/g protein. The main fatty acids of total lipid were linoleic, oleic and palmitic acids, which comprised over 80% of total fatty acids. Cultivar yutae had higher content of neutral lipid but lower content of glycolipid and phospholipid. Among the fatty acids, content of linoleic acid were the highest $(41.4{\sim}54%)$ and ratios of unsaturated fatty acid to the total fatty acid was $82.7{\sim}85.2%$. The main fatty acid of neutral lipid, glycolipid, and phospholipid was linoleic acid.

• Journal of the Korean Wood Science and Technology
• /
• v.7 no.2
• /
• pp.3-30
• /
• 1979

Larch ($\underline{Larix}$ $\underline{leptolepis}$ GORDON), one of the major afforestation species in Korea in view of its growing stock and rate of growth, is not favored as a raw material for pulp due to its low yield of pulp and difficulties with bleaching arising from the high content of extractives in wood, and the high heartwood ratio and the active phenolics, respectively. The purpose of this study is to investigate the characteristics of firstly pulping with various additives of cellulose protector for the yield of pulp, and secondly bleaching with oxygen for chlotination-alkali extraction of five stage-sequence to reduce chlorine compounds in bleaching effluents. The kraft cooking liquor for five age groups of larchwood was 18 percent active alkali with 25 percent sulfidity and 5 : 1 liquor-to-wood ratio, and each soda liquor for sap-and heart-wood of the 15-year-old larchwood was 18 percent alkali having one of the following cellulose protectors as the additive; magnesium sulfate ($MgSO_4$, 2.5%), zinc sulfate ($ZnSO_4$, 2.5%), aluminium sulfate ($Al_2(SO_4)_3$, 2.5%), potasium iodide (KI, 2.5%), hydroquinone (HQ, 2.5%), anthraquinone (AQ, 0.1%) and ethylene diamine (EDA, 2.5%). Then each anthraquinone-soda liquor for the determination of suitable cooking condition was the active alkali level of 15, 17 and 19 percent with 1.0, 0.5 and 0.1 percent anthraquinone, respectively. The cooking procedure for the pulps was scheduled to heat to 170$^{\circ}C$ in 90 minutes and to cook 90 minutes at the maximum temperature. The anthraquinone-soda pulps from both heartwood and sapwood of 15-year-old larchwood prepared with 0.5 percent anthraquinone and 18 percent active alkali were bleached in a four-stage sequency of OCED. (O: oxygen bleaching, D: chlorine dioxide bleaching and E: alkali extraction). In the first stage oxygen in atmospheric pressure was applied to a 30 percent consistency of pulp with 0.1 percent magnesium oxide (MgO) and 3, 6, and 9 percent sodium hydroxide on oven dry base, and the bleached results were compared pulps bleached under the conventional CEDED (C: chlorination). The results in the study were summarized as follows: 1. The screened yield of larch kraft pulp did not differ from particular ages to age group, but heartwood ratio, basic density, fiber length and water-extractives contents of wood and the tear factor of the pulp increased with increasing the tree age. The total yield of the pulp decreased. 2. The yield of soda pulp with various chemicals for cellulose protection of the 15-year-old larchwood increased slightly more than that of pure soda pulp and was slightly lower than that of kraft pulp. The influence of cellulose protectors was similar to the yield of pulps from both sapwood and heartwood. The effective protectors among seven additives were KI, $MgSO_4$ and AQ, for which the yields of screened pulp was as high as that of kraft pulp. Considering the additive level of protector, the AQ was the most effective in improving the yield and the quality of pulp. 3. When the amount of AQ increased in soda cooking, the yield and the quality of the pulp increased but rejects in total yield increased with decreasing the amount of active alkali from 19 to 15 percent. The best proportion of the AQ seemed to be 0.5 percent at 17 percent active alkali in anthraquinone-soda pulping. 4. On the bleaching of the AQ-soda pulp at 30 percent consistency with oxygen of atomospheric pressure in the first stage of the ODED sequence, the more caustic soda added, the brighter bleached pulp was obtained, but more lignin-selective bleaching reagent in proportion to the oxygen was necessary to maintain the increased yield with the addition of anthraquinone. 5. In conclusion, the suitable pulping condition for larchwood to improve the yield and quality of the chemical pulp to the level for kraft pulp from conventional process seemed to be. A) the selection of young larchwood to prevent decreasing in yield and quality due to the accumulation extractives in old wood, B) the application of 0.5 percent anthraquinone to the conventional soda cooking of 18 percent active alkali, and followed, C) the bleaching of oxygen in atmospheric pressure on high consistency (30%) with 0.1 percent magnesium oxide in the first stage of the ODED sequence to reduce the content of chlorine compounds in effluent.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.1
• /
• pp.21-48
• /
• 1974

The studies were carried out to disclose the physical and chemical properties of sericin fraction obtained from silk cocoon shells and its characteristics of swelling and solubility. The following results were obtained. 1. The physical and chemical properties of sericin fraction. 1) In contrast to the easy water soluble sericin, the hard soluble sericin contains fewer amino acids include of polar side radical while the hard soluble amino acid sach as alanine and leucine were detected. 2) The easy soluble amino acids were found mainly on the outer part of the fibroin, but the hard soluble amino acids were located in the near parts to the fibroin. 3) The swelling and solubility of the sericin could be hardly assayed by the analysis of the amino acid composition, and could be considered to tee closely related to the compound of the sericin crystal and secondary structure. 4) The X-ray patterns of the cocoon filament were ring shape, but they disappeared by the degumming treatment. 5) The sericin of tussah silkworm (A. pernyi), showed stronger circular patterns in the meridian than the regular silkworm (Bombyx mori). 6) There was no pattern difference between Fraction A and B. 7) X-ray diffraction patterns of the Sericin 1, ll and 111 were similar except interference of 8.85A (side chain spacing). 8) The amino acids above 150 in molecular weight such as Cys. Tyr. Phe. His. and Arg. were not found quantitatively by the 60 minutes-hydrolysis (6N-HCI). 9) The X-ray Pattern of 4.6A had a tendency to disappear with hot-water, ether, and alcohol treatment. 10) The partial hydrolysis of sericin showed a cirucular interference (2A) on the meridian. 11) The sericin pellet after hydrolysis was considered to be peptides composed with specific amino acids. 12) The decomposing temperature of Sericin 111 was higher than that of Sericin I and II. 13) Thermogram of the inner portioned sericin of the cocoon shell had double endothermic peaks at 165$^{\circ}C$, and 245$^{\circ}C$, and its decomposing temperature was higher than that of other portioned sericin. 14) The infrared spectroscopic properties among sericin I, II, III and sericin extracted from each layer portion of the cocoon shell were similar. II. The characteristics of seriein swelling and solubility related with silk processing. 1) Fifteen minutes was required to dehydrate the free moisture of cocoon shells with centrifugal force controlled at 13${\times}$10$^4$ dyne/g at 3,000 R.P.M. B) It took 30 minutes for the sericin to show positive reaction with the Folin-Ciocaltue reagent at room temperature. 3) The measurable wave length of the visible radiation was 500-750m${\mu}$, and the highest absorbance was observed at the wave length of 650m${\mu}$. 4) The colorimetric analysis should be conducted at 650mu for low concentration (10$\mu\textrm{g}$/$m\ell$), and at 500m${\mu}$ for the higher concentration to obtain an exact analysis. 5) The absorbing curves of sericin and egg albumin at different wave lengths were similar, but the absorbance of the former was slightly higher than that of the latter. 6) The quantity of the sericin measured by the colorimetric analysis, turned out to be less than by the Kjeldahl method. 7) Both temperature and duration in the cocoon cooking process has much effect on the swelling and solubility of the cocoon shells, but the temperature was more influential than the duration of the treatment. 8) The factorial relation between the temperature and the duration of treatment of the cocoon cooking to check for siricin swelling and solubility showed that the treatment duration should be gradually increased to reach optimum swelling and solubility of sericin with low temperature(70$^{\circ}C$) . High temperature, however, showed more sharp increase. 9) The more increased temperature in the drying of fresh cocoons, the less the sericin swelling and solubility were obtained. 10) In a specific cooking duration, the heavier the cocoon shell is, the less the swelling and solubility were obtained. 11) It was considered that there are differences in swelling or solubility between the filaments of each cocoon layer. 12) Sericin swelling or solubility in the cocoon filament was decreased by the wax extraction.. 13) The ionic surface active agent accelerated the swelling and solubility of the sericin at the range of pH 6-7. 14) In the same conditions as above, the cation agent was absorbed into the sericin. 15) In case of the increase of Ca ang Mg in the reeling water, its pH value drifted toward the acidity. 16) A buffering action was observed between the sericin and the water hardness constituents in the reeling water. 17) The effect of calcium on the swelling and solubility of the sericin was more moderate than that of magnecium. 18) The solute of the water hardness constituents increased the electric conductivity in the reeling water.

• Food Science of Animal Resources
• /
• v.30 no.6
• /
• pp.997-1006
• /
• 2010

The objective of this study was to investigate the proximate composition, pH, meat color, water holding capacity (WHC), cooking loss (CL), cholesterol content, and trans-fatty acid content of Hanwoo beef according to quality grade and cut. Five cuts [Cheggt (strip loin), Dngsim (loin), Moksim (chuck roll), Udoon (top round), Yanggi (brisket)] were obtained from 15 Hanwoo animals [3 bulls and 12 steers, 24-30 months old]. Three animals were selected from each quality grade of $1^{++}$, $1^+$, 1, 2, and 3. The protein and moisture contents (%) were significantly higher, and the fat contents (%) were significantly lower in 3 quality grade compared to the other grades (p<0.05). pH values of chuck roll and strip loin were significantly lower in $1^+$ quality grade (5.61 and 5.51) than those in 3 quality grade (5.88 and 5.92) (p<0.05). CIE L* values were significantly higher in the $1^{++}$ quality grade group (38.52-42.69%) than in 3 quality grade (33.02-36.08) (p<0.05). In the $1^{++}$ and 2 quality grade groups, CIE $L^*$ values of loin were significantly higher than those of other cuts (p<0.05). CIE $a^*$ values of loin (28.11) in 1 quality grade were the highest, whereas those of strip loin (15.36) in 3 quality grade were the lowest (p<0.05). WHC was not significantly different among the five cuts or quality grades. In CL, loin and strip loin were significantly lower in $1^{++}$ quality grade than in 3 quality grade (p<0.05), and they were also significantly lower (22.21-24.81%) than the other cuts in the same quality grade (p<0.05). The loin in $1^{++}$ (41.26 mg/100 g), $1^+$ (43.23), and 1 quality grades (48.63) had higher cholesterol contents (%) than in 2 (36.02) and 3 quality grades (29.84) (p<0.05). Cholesterol contents of the five cuts in $1^{++}$ quality grade (39.44-43.31%) were significantly higher than those in 3 quality grade (28.09-32.39%). The trans-fatty acid contents of the five cuts were 1.08-2.72%. The loin, strip loin, brisket, and top round in 3 quality grade had significantly higher trans-fatty acid contents than those of the other grades (p<0.05).

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.1039-1046
• /
• 2003

In a trial involving 240pigs, the proximate composition, physico-chemical properites, color, amino acid composition and fatty acid composition of loin muscle were investigated in feeding various finished pig feeds. The treatments included feeding control) the low-nutrient density diet(2,960cal/kg ME, 12.25% CP, 0.41% lysine and 0.70% Ca), T1) the medium-nutrient density diet(3,220cal/kg ME, 15.50% CP, 0.87% lysine and 0.90% Ca) and T2) the hight-nutrient density diet(3,350cal/kg ME, 17.50% CP, 1.05% lysine and 0.90% Ca). The crude ash contents of T1 were significantly(p〈0.05) higher than those of control and T2. The pH$_{u}$ of T2 were significantly higher than those of control and T1, but cooking loss were significantly(p〈0.05) lower than those of control. In compositions amino acid, aspartic acid, threonine, iso-leucine and histidine of T2 were higher than those of control, but proline and glycine were significantly(p〈0.05) lower then those of control. The oleic acid(18:1) contents of control were significantly higher than those of T1 and T2, but the contents of linoleic acid(C18:2) and arachidonic(C20:4) acid were significantly(p〈0.05) lower. Inconclusion, the results of the experiments suggest that the high-nutrient density diet for pigs tended to improve the postmortem pH$_{u}$ and cooking loss.

• Korean Journal of Poultry Science
• /
• v.38 no.4
• /
• pp.293-304
• /
• 2011

The current work was carried out to investigate the effect of crossbred Korean native chickens (KNC) on performance and meat quality. A total of 720 chicks (1d of age) was used in this work and were divided into groups by crossbreds (A, B, C and D) and sex (male and female). Crossbreds were A) (KNC egg-meat type C strains ${\times}$ KNC meat type S strains) ${\times}$ Ross broiler, B) (KNC egg-meat type C strains ${\times}$ KNC meat type H strains) ${\times}$ KNC meat type S strains, C) (KNC native R strains${\times}$KNC meat type S strains)${\times}$KNC meat type H strains and D(White Semibroiler Chickens). Experimental diets consisted of 3 phases such as starter (0~5 weeks; CP 20.0%, ME 3,050 kcal/kg), earlier (5~8 weeks; CP 18.0%, ME 3,100 kcal/kg) and finisher (8~12 weeks; CP 16.0%, ME 3,150 kcal/kg). They were fed the broiler diets for 12 weeks at the flat house and thirty six chickens were slaughtered at week 5 and 10. There was no significant difference on the fertility of crossbred KNCs, and the hatchability of B crossbred was low compared to other crossbreds. On body weight (BW), D crossbred resulted in a higher BW after 5 weeks (P<0.05). Body weight gain (BWG) and feed intake (FI) of A crossbred were also significant higher compared to the other crossbreds for all periods. On carcass ratio (CR), A crossbred showed higher CR at 5 weeks, there was no significant among crossbreds at 10 weeks. The partial meat ratio(ala, breast, neck, leg) of C crossbred was the lowest among other crossbreds (P<0.05), but the back meat ratio was not difference among treatments at 5 and 10 weeks. pH of meats have no difference among crossbreds at 5 week, and A crossbred was high compared to other crossbreds at 10 week (P<0.05). The moisture content of D crossbred meat and the protein content of B crossbred meat were high compared to other crossbreds at 5 week. Chemical compositions of meats have no difference among crossbreds at 10 week. Lightness and redness have not significance among crossbreds at 5 week, and redness of A crossbred was the highest among all crossbreds (P<0.05). Shear force and cooking loss of A crossbred were high at 5 week, and cooking loss of A crossbred was low compared with other crossbreds at 10 week. These results suggested the basic data that needed to develope the new strains.