• Journal of the Korean Wood Science and Technology
• /
• v.44 no.2
• /
• pp.231-240
• /
• 2016

The change in chemical compositions of leachate and medium density fiberboard (MDF) from a laboratory-scale simulated landfill which constructed in a plastic container containing alternating layers of soil and MDF was investigated to evaluate decomposing of MDF in soil. Four treatments were conducted: 1) MDF in soil, 2) MDF only, 3) cured UF resin in soil, and 4) soil only. Molecular weight (MW) distribution of compounds in leachate from soil only treatment did not change over time. In UF resin in soil treatment, the MW distribution shifted to a lower MW distribution over time, while the peak shifted to the left indicated changing to higher MW distribution in leachate from treatment 1 and 2 contained MDF. Higher percent nitrogen in leachate was observed in MDF containing treatments due to the UF resin in the MDF. The percent carbon slightly increased in MDF only while that greatly decreased in MDF in soil treatment maybe due to bacterial activity. The percent of extractable materials from the MDF decreased greatly on day 35 compare to day 0, and subsequently did not change much on day 77. In contrast, percent holocellulose and lignin did not change much over time. No structural change of the wood fiber in MDF occurs during the study. Water-soluble materials from MDF in soil contributed the change in chemical composition of leachate.

• Macromolecular Research
• /
• v.17 no.7
• /
• pp.483-490
• /
• 2009

Stable poly(styrene-co-divinylbenzene) [P(St-co-DVB)] micro spheres with narrow size distribution were synthesized in the presence of 2,2'-azobis(2,4-dimethyl valeronitrile) (V-65) and co-initiator in an acetone/water mixture in the precipitation polymerization at $53^{\circ}C$ for 24 h. Potassium peroxodisulfate (KPS), ammonium peroxodisulfate (APS) and sodium peroxodisulfate (NaPS) were used as co-initiators. The optimum ratio of acetone to water for the formation of a narrow distribution of P(St-co-DVB) particles was 49:11 (g/g). The optimum co-initiator compositions for narrow distribution were 9:1 (g/g) for V-65 to KPS, 11:1 for V-65 to APS and 6:1 for V-65 to NaPS. The yield for these compositions was $54{\sim}57%$ and the largest particle size was obtained with the lowest zeta-potential and CV values. From the XPS measurements, the charge density was increased but the zeta potential decreased with increasing sulfur content, implying that the sulfate group provides the electrostatic stabilization on the particle surface. This suggested that the self-crosslinking between styrene and DVB, the electrostatic stabilization of initiators, and the balanced hydrophobic and hydrophilic properties of the solvents are responsible for the formation of stable P(St-co-DVB) spherical particles with narrow size distribution.

• Journal of the Korean Chemical Society
• /
• v.63 no.1
• /
• pp.12-23
• /
• 2019

The new experimental data of liquid-liquid equilibrium (LLE) of aqueous two-phase system (ATPS) consisting of poly(ethylene glycol) 3000 + tri-potassium citrate at different pH were presented. It was found that an increase in pH resulted in the expansion of the two-phase region. The TLL and STL increased with increasing the pH values. The Merchuk equation can be appropriately employed to correlate the binodal curves and also the tie-line compositions were adjusted to both the Othmer-Tobias and Bancroft equations. In order to calculate the compositions of the phase and the ends of the tie-lines, density and refractive indices as two physical properties were used. Finally, the extended UNIQUAC, UNIFAC, Virial-(Mobalegholeslam & Bakhshi) and modified UNIQUAC-FV were used to measure the phase equilibria at different pH. The results of the models suggested that it can be used quite well to correlate the LLE in an aqueous solution of polymer-salt.

• Korean Chemical Engineering Research
• /
• v.52 no.2
• /
• pp.233-239
• /
• 2014

The slagging which generated from ash deposition on furnace wall and tube in boiler reduces the heat transfer efficiency and damages to safety of boiler. The slag flow behavior in boiler is affected by melting temperature which is related to ash compositions. In this study, the behavior of slag is researched by using ash fusibility test, called TMA (Thermo-Mechanical Analysis). The technique measures the percentage shrinkage as the function of temperature, T25%, T50%, T75%, T90%. These temperatures indicate different stages of melting. Then, the effect of ash chemical compositions measured from XRF (X-ray Fluorescence Spectrometer) to ash fusion temperatures is discussed. Among the chemical compositions, refractory and fluxing influence on ash fusibility is described. High levels of refractory component and limited amount of fluxing components ($Fe_2O_3$, $K_2O$, CaO) increase overall melting temperatures. High $SiO_2/Al_2O_3$ ratio decrease high melting temperatures (T75%, T90%). Meanwhile, the presence of reasonable levels of fluxing components reduces overall melting temperature. A presence of fluxing component such as $K_2O$ and CaO is found to decrease the T25% values significantly. From this research, it is possible to make a reasonable explanation and prediction of ash fusion characteristic from analysis of TMA results and ash chemical compositions.

• Economic and Environmental Geology
• /
• v.23 no.1
• /
• pp.11-23
• /
• 1990

Pyrophyllite, kaolinite, and alunite deposits distributing in Southwestern parts of Cheonnam are classified into three types of minerals assemblages by the results of X-ray diffraction analysis etc. The first mineral assemblages contains pyrophyllite, kaolinite, dickite, quartz, diaspore and/or corundum, the second one contains alunite inseads of corundum, and the third one contains alunite without pyrophyllite and diaspore. It is can be considered that the depoSits which consist mainly of pyrophyllite are formed higher temperature than the other deposits. Judging form the chemical analyses the chemical compositions of hydrothermal solutions acting to the deposits seem to be relatively simple. But the hydrothermal solutions which generated Dogcheon, Jugjcon, Ogmaesan, and Seongsan mine contain rather somewhat higher $K_2O$. The values of the Trace Elements and REE analysis of the host rocks of deposits suggest that the host rocks are these deposits are the last products of magmatic differentiation.

• Journal of Chest Surgery
• /
• v.25 no.1
• /
• pp.112-116
• /
• 1992

I clinically analysed 13 cases of broncholithiasis which treated surgically and found only four cases of broncholithiasis caused by the erosion of the peribronchial lymph node named by extrinsic formation[Group II], and nine cases of broncholithiasis caused by intrinsic formation[group I] which indicates that no evidence of the erosion of the calcified per-ibronchial lymph node into the bronchial tree was found. This study is performed to see any differences between two groups regarding presenting symptoms, locations of broncholith, preoperative diagnosis, a history of pulmonary tuberculosis, a procedure of operation, and chemical compositions of broncholiths from both groups. There was no difference between two groups in the presenting symptoms, the procedure of operation, and chemical compositions of broncholiths. The broncholits from group two is located in the right middle lobe bronchus, and the broncholiths of group one were distributed at various bronchi, In group one, only five cases out of nine had preoperative diagnosis[55.5%], but in group two, all four had preoperative diagnosis. All cases had good postoperative courses without any complication and recurrences.

• Journal of the Mineralogical Society of Korea
• /
• v.12 no.2
• /
• pp.77-90
• /
• 1999

Characteristics and variations of chemical compositions in Co-rich crusts occurred in the EEZ of the Republic of Marshall Islands were reviewed. Correlation coefficient analysis, hierarchical cluster analysis, and Q-mode factor analysis for 62 samples were done in this study. All data were selected and gathered from the open file report of the cooperative cruise done by United States Geological Survey with Scripps Institute of Oceanography, University of Hawaii or Korea Ocean Research Development Institute. The average of crust thickness. Co content, and Ni content of 62 samples from the 21 seamounts were 30mm, 0.58 wt% and 0.40%, respectively. The mineral phases and associated elements assigned by correlation coefficients, cluster analysis and Q-mode factor analysis are following four. 1) CFA: P, Ca, CO2, Y, Sr: 2) Mn-oxide mineral: As, Mn, Co, Na: 3) Al-silicate mineral: Pd,Si, Al, Cu, Fe: 4) PGE-bearing mineral: Rh, Pt, Ir.

• Journal of the Korea Safety Management & Science
• /
• v.21 no.4
• /
• pp.45-49
• /
• 2019

The basalt fiber is expected to become a trend for industrial fibers as they have better properties of heat-resistant, non-combustion, absorbent, soundproof, moistureproof, lightweight, corrosion resistant, and high strength properties. Also, the fiber is found to be non-toxic and harmless to the human body. Therefore, in this study, we analyzed the chemical and mineral compositions of powdered sludge of basalt produced at seven sites on Jeju Island for the development of fire resistance insulating material for a building. The results showed that the basalt stone sludge is made from only sodium calcium aluminum silicate and ferridioside components unlike the basalt rock.

• Macromolecular Research
• /
• v.9 no.6
• /
• pp.319-326
• /
• 2001

Fatigue crack growth (FCG) behavior of natural rubber/ethylene-propylene-diene rubber (NR/EPDM) blend vulcanizates under dynamic tearing condition was investigated by using a fracture mechanics approach. It appeared that variation of crack growth rate with blend compositions was dependent on the level of imposed tearing energy G. At low tearing energy region, the FCG rates of the blend were lower as the EPDM content was increased, while at high tearing energy region, the trend was reversed. Over the measured range of tearing energy G, all blend compositions showed the lower crack growth rates compared to the average of properties of component elastomers. When the blends were thermally aged, the fatigue resistance of the blends was deteriorated in proportion to the concentration of EPDM phase. Fatigue crack growth behavior of the blends was supposed to be associated with the inhomogeneities of the crosslink structure of the blends arising from cure incompatibility of the EPDM and NR when they are sulphur cured.

• Bulletin of the Korean Chemical Society
• /
• v.13 no.6
• /
• pp.642-647
• /
• 1992

Second-order rate constants have been measured spectrophotometrically for the reactions of substituted phenyl acetates with butane-2,3-dione monoximate and p-chlorophenoxide anions in MeCN-H$_2$O mixtures of varying compositions. The reaction rate, unexpectedly, decreased remarkably upon initial additions of MeCN to H$_2$O up to 30-40 mole ${\%}$ MeCN, and followed by a gradual increase upon further additions of MeCN. The change in solvent composition also influenced the magnitude of the ${\alpha}$-effect, i.e., the ${\alpha}$-effect increased as the mole ${\%}$ MeCN increased. The solvent dependent ${\alpha}$-effect for the present system appears to indicate that the differential solvation between the ${\alpha}$-effect nucleophile and the corresponding normal nucleophile is not solely responsible but the difference in the transition-state stabilization is also responsible for the ${\alpha}$ -effect in organic solvent-rich region.