• Economic and Environmental Geology
• /
• v.36 no.6
• /
• pp.415-429
• /
• 2003

This study was objected to identify the difference of water quality and the characteristics of water contamination in adjacent bed-rock areas of Upper Hwajeonni and Guryongsan Formations in Miwon, Choongchungbuk-do, Korea. Water samples showed mainly (Ca, Mg)-$HCO_3$ type in Upper Hawjeonni Formation and (Ca, Mg)-$SO_4$ and (Ca, Mg)-$HCO_3$ types in Guryongsan Formation indicating the enrichment of $SO_4$ in major compositions. Groundwater quality could be divided into two groups based on the major weathering processes, implied by the ratio of bicarbonate to silica. Carbonate-silicate weathering predominates in Upper Hwajeonni Formation, and silicate weathering in Guryongsan Formation. Stream-water quality also appeared to be controlled by water-rock interaction. Cluster analysis identified three groups of groundwater and four groups of stream-water with distinctive geochemical characteristics. The results of factor analysis indicated that the levels of each chemical constituent in water samples derived from both natural weathering reactions and anthropogenic contamination sources. To delineate the pollution potential of water resources, Modified Pollution Index(M.P.I.) was developed. M.P.I. scores of water samples ranged from -0.08 to 0.18, with mostly positive along the rock quarry in Guryongsan Formation areas. M.P.I. scores appeared to be a useful predictor of metal contamination of water resources.

• Analytical Science and Technology
• /
• v.11 no.6
• /
• pp.485-494
• /
• 1998

Ternary and quaternary alloys composed of Mo-Ru-Rh-Pd were prepared and their crystal structure and quantitative chemical compositions were analysed by XRD, WDX, EDX and ICP/AES. The results of X-ray diffraction studies showed that the alloys were crystallized in hexagonal close packing, well known as ${\varepsilon}$-phase with $P6_3/mmc$ of space group. The optimum accelerating voltage for Zr~Cd(40~48) analyzed by EPMA using PET crystal was found to be 15 kV and the linear regression coefficient(R) of atomic number and X-ray intensity was approximately 0.998 without Tc standard specimen. The WDX results of alloys of Mo and Pd by linear regression equations were detected to be 0.1% lower compared to WDX analysis results using standard specimen, while Ru, Rh were detected 3% higher. These alloys were completely dissolved in mixed acid of 12.5 mL HCl and 1 mL $HNO_3$, at $220^{\circ}C$ for 22 hours using autoclave with PTFE vessel. There was no reprecipitating phenomnon when diluted 100 times with 1N-HCl. The results of ICP/AES analysis deviated less than 4% comparing with those of normal WDX analysis.

• Journal of Animal Science and Technology
• /
• v.50 no.2
• /
• pp.247-254
• /
• 2008

A total of 40 pigs were used to investigate the feeding effects of supplementary wild grape wine by-product on pork quality of American Berkshire breed in the swine farm of Hamyang area. Treatments were C that was basal diet, and T that was treated by dietary wild grape wine by-product(5%) were added in feed. About 70 kg pigs were bred a period of 88 days, and slaughtered. The pork quality characteristic were measured in pork loin. In chemical composition, moisture and crude fat were not significantly different between C and T, but T were lower(p<0.05) than C. There were no difference in crude protein and crude ash(p<0.05). pH and water holding capacity(WHC) were not significantly different between C and T, whereas the cholesterol and fat shear force of T were lower(p<0.05) than C. There were no different in the meat color, but the Hunter’s L* and W value of T were higher(p<0.05) than C. Oleic acid(C18:1), linoleic acid(C18:2, n-6), arachidonic acid(C20:4, n-6), Essential fatty acid(EFA), and EFA/unsaturated fatty acid were significantly(p<0.05) different between C and T, in the fatty acid compositions of loins. Also, the total amino acid composition of pork were not significantly different between C and T, but essential fatty acid of T was significantly higher(p<0.05) than that of C. This observation suggests that wild grape wine by-product supplements may have some beneficial effects on improving backfat color, shear force, cholesterol and essential fatty acid content of pork loin.

• The Korean Journal of Food And Nutrition
• /
• v.15 no.3
• /
• pp.209-214
• /
• 2002

This study was carried out to investigate the physicochemical properties of aloe added bagel. The result of sensory evaluation showed that addition of the aloe powder above 1% was not advisable because of its bitterness. freeze dried aloe powder(0, 1%, 0.5%, 1%) was added to bagel and chemical compositions of doughs were evaluated. The ash content of control was 0.444% and each of the samples(0.1%, 0.5%, 1%) was 0.472%, 0.553%, and 0.633% respectively. Although the ash content of dough increased gradually according to the addition of aloe powder, the volume of the bagel was not affected much. As the amount of the aloe powder was changed, the water absorption rate, the extensibility, and the viscosity of the dough were affected. The physical characteristics of dough were as follows: 1) The water absorption rate of the dough was gradually decreased from 65.3% at control, to 65.2% at 0.1%, 64.2% at 0.5%, 63.5% at 1% each by farinograph. 2) The extensibility of the dough was significantly declined at 1% by extensograph; from 20.7cm at control, to 20.3cm at 0.1%, 18.8cm at 0.5%, and 16.4cm at 1% each. 3) The top viscosity of the dough was sharply declined between 575 B.U at control and 515 B.U at 0.1%, afterwards, 480 B.U at 0.5%, 475 B.U at 1% each by viscograph. Considering the result of the test, aloe added bagel could promote physicochemical properties of dough as well as health effects.

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.495-501
• /
• 2016

Mineral oil has been widely used as an insulating oil for electrical transformers for a long time, but the necessity of employing new insulation oil such as vegetable oil has been increased due to urgent needs for the biodegradability when it leaks and also for the thermal stability at a higher operation temperature. Although specific periods are required between the production and consumption, there are still short of the data to prove the insulation oils' storage stability depending upon various circumstances and their resources. Thus, this paper demonstrates the insulation oils' oxidation characteristics of both mineral and vegetable oils when each was exposed to different environments for 12 weeks. From this test, some properties including total acid number, water content and dielectric breakdown were changed under specific conditions and resources. Vegetable oils showed higher hydrophilicity and water saturation than those of mineral oils due to their molecular compositions. Under sunlight exposure condition, all insulation oils oxidized and changed their properties when exposing to the direct light, regardless of the resource used.

• Atmosphere
• /
• v.26 no.2
• /
• pp.257-275
• /
• 2016

Asian dust is a seasonal meteorological phenomenon influencing most East Asia, irregularly occurring during spring. Unusual heavy Asian dust event in winter was observed in Seoul, Korea, with up to $1,044{\mu}g\;m^{-3}$ of hourly mean $PM_{10}$, in 22~23 February 2015. Causes of such infrequent event has been studied using both ground based and spaceborne observations, as well as numerical simulations including ECMWF ERA Interim reanalysis, NOAA HYSPLIT backward trajectory analysis, and ADAM2-Haze simulation. Analysis showed that southern Mongolia and northern China, one of the areas for dust origins, had been warm and dry condition, i.e. no snow depth, soil temperature of ${\sim}0^{\circ}C$, and cumulative rainfall of 1 mm in February, along with strong surface winds higher than critical wind speed of $6{\sim}7.5m\;s^{-1}$ during 20~21 February. While Jurihe, China, ($42^{\circ}23^{\prime}56^{{\prime}{\prime}}N$, $112^{\circ}53^{\prime}58^{{\prime}{\prime}}E$) experienced $9,308{\mu}g\;m^{-3}$ of hourly mean surface $PM_{10}$ during the period, the Asian dust had affected the Korean Peninsula within 24 hours traveling through strong north-westerly wind at ~2 km altitude. KMA issued Asian dust alert from 1100 KST on 22nd to 2200 KST on 23rd since above $400{\mu}g\;m^{-3}$ of hourly mean surface $PM_{10}$. It is also important to note that, previously to arrival of the Asian dust, the Korean Peninsula was affected by anthropogenic air pollutants ($NO_3^-$, $SO_4^{2-}$, and $NH_4^+$) originated from the megacities and large industrial areas in northeast China. In addition, this study suggests using various data sets from modeling and observations as well as improving predictability of the ADAM2-Haze model itself, in order to more accurately predict the occurrence and impacts of the Asian dust over the Korean peninsula.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.3
• /
• pp.284-294
• /
• 2006

Statement of problem. Proliferation of Candida albicans is primarily within the plaque on the fitting surface of the denture rather than on the inflamed mucosa. Consequently, the treatment of the denture is equally important as treatment of the tissue. Cleansing and disinfection should be efficiently carried-out as the organisms can penetrate into the voids of the acrylic resin and grow in them, from which they can continue to infect and reinfect bearing tissues. Purpose. The purpose of this study was to evaluate the applicability of photocatalytic reaction to eliminate Candida albicans from acrylic resin denture base, and to investigate the anti-fungal effect with various UVA illumination time. Materials and Methods. The specimens were cured by the conventional method following the manufacturer's instruction using thermal polymerized denture base resin (Vertex RS: Dentimex, Netherlands). $TiO_2$ photocatalyst sol(LT), which is able to be coated at normal temperature, was made from the Ti-alkoxide progenitor. The XRD patterns, TEM images and nitrogen absorption ability of the $TiO_2$ photocatalyst sol(LT) were compared with the commercial $TiO_2$ photocatalyst P-25. The experimental specimens were coated with the mixture of the $TiO_2$ photocatalyst sol(LT) and binder material (silane) using dip-coater, and uncoated resin plates were used as the control group. Crystallinity of $TiO_2$ of the specimen was tested by the XRD. Size, shape and chemical compositions were also analyzed using the FE-SEM/ EDS. The angle and methylene blue degradation efsciency were measured for evaluating the photocatalytic activity of the $TiO_2$ film. Finally, the antifungal activity of the specimen was tested. Candida albicans KCTC 7629(1 ml, initial concentration $10^5$ cells/ ml) were applied to the experiment and control group specimens and subsequently two UVA light source with 10W, 353 nm peak emission were illuminated to the specimens from 15cm above. The extracted $2{\mu}l$ of sample was plated on nutrient agar plate ($Bacto^{TM}$ Brain Heart Infusion; BD, USA) with 10 minute intervals for 120 minute, respectively. It was incubated for 24 hours at $37^{\circ}C$ and the colony forming units (CFUs) were then counted. Results. Compared the characteristics of LT photocatalyst with commercial P-25 photocatalyst, LT were shown higher activity than P-25. The LT coated experimental specimen surface had anatase crystal form, less than 20 nm of particle size and wide specific surface area. To evaluate the photocatalytic activity of specimens, methylene blue degradation reaction were used and about 5% of degradation rate were measured after 2 hours. The average contact angle was less than $20^{\circ}$ indicating that the LT photocatalyst had hydrophilicity. In the antifungal activity test for Candida albicans, 0% survival rate were measured within 30 minute after irradiation of UVA light. Conclusion. From the results reported above, it is concluded that the UVA-LT photocatalytic reaction have an antifungal effect on the denture surface Candida albicans, and so that could be applicable to the clinical use as a cleaning method.

• Journal of the Korean Ceramic Society
• /
• v.51 no.4
• /
• pp.271-277
• /
• 2014

To overcome the limitations of the solid oxide fuel cells (SOFCs) due to the high temperature operation, there has been increasing interest in proton conducting fuel cells (PCFCs) for reduction of the operating temperature to the intermediate temperature range. In present work, the perovskite $BaCe_{0.85-x}Zr_xY_{0.15}O_{3-\delta}$ (BCZY, x = 0.1, 0.3, 0.5, and 0.7) were synthesized via solid state reaction (SSR) and adopted as an electrolyte materials for PCFCs. Powder characteristics were examined using X-ray diffraction (XRD), thermogravimetric analysis (TGA) and Brunauer, Emmett and Teller (BET) surface area analysis. Single phase BCZY were obtained in all compositions, and chemical stability was improved with increasing Zr content. Anode-supported cell with $Ni-BaCe_{0.55}Z_{0.3}Y_{0.15}O_{3-\delta}$ (BCZY3) anode, BCZY3 electrolyte and BCZY3-$Ba_{0.5}Sr_{0.5}Co_{0.8}Fe_{0.2}O_{3-\delta}$ (BSCF) composite cathode was fabricated and electrochemically characterized. Open-circuit voltage (OCV) was 1.05 V, and peak power density of 370 ($mW/cm^2$) was achieved at $650^{\circ}C$.

• Food Science and Preservation
• /
• v.20 no.3
• /
• pp.342-347
• /
• 2013

In recent years, polyphenol-rich herbs, fruits and processed foods, which are made of plant origin, have attracted much attention due to their potential health benefits. Pomegranate (Punica granatum L.) is an important source of bioactive compounds and has been used to treat diseases because of its medicinal properties. This research was focused on characterizing Korea's national cultivar and a similar product from California, USA. To evaluate their bioactive compounds and pharmacological activities, their anti-oxidation and cancer inhibition properties, as well as their organic acid and free sugar contents, were investigated. The national cultivar had low total sugar and high organic acid contents, contrary to the imported product. The results showed that the peel of national cultivar had high polyphenol and ellagic acid contents compared to imported product. The free radical scavenging capacity was evaluated via 2,2-diphenyl-1-picrylhydrazyl (DPPH) and its positive correlation with the total polyphenol contents was found. The anti-cancer activity of methanol extracts revealed growth inhibition against the prostate cancer cell. These results signify that while pomegranate, national cultivar, is more sour than the imported product, its health benefits could be excellent. Also, the polyphenol compound content of the non-edible part (such as the peel and the seed) was higher than that of the juice. Thus, it is suggested that the byproduct of the juice extraction could be potentially used in other fields such as medicine or dietary agents.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.310-313
• /
• 2009

Several high nitrogen stainless steel ingots(100kg) were fabricated with changing Ni and $[N]_2$ contents by Pressurized Vacuum Induction Melting(P_VIM). After free forging process, chemical compositions, microstructure and mechanical properties were estimated. Hardness was increased with the increase of $[N]_2$ content. Furthermore, microstructure including a lot of tempering twins was observed with optical microscope. Mechanical properties were estimated as function of solution treatment temperature and cooling method(air/water) under duration time of 1 hr on sample that were fabricated with Ni content under the atmospheric $[N]_2$ pressure. At solution treatment range of $1050{\sim}1100^{\circ}C$, hardness was decreased with the increase of solution temperature and there were little discrepancy of microstructure and hardness with cooling method. Computer simulation was carried out in order to inspect pass schedule in cold rolling process. When the condition of simulation was roll speed of 2.5mpm, rolling rate $15{\sim}17%$ per pass, it was ascertained that the formation such as deformation by sticking and lamellar sliver etc. was restricted from a simulation.