• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.173-174
• /
• 2022

In this study, the mixing performance of concrete was studied by setting the chemical admixture and mixing time as variables. As a result of the indoor experiment and batch plant review, the mixing time reduction performance was confirmed when the PC-based admixture A was used.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.1
• /
• pp.68-75
• /
• 2017

The study investigates the effects of the content and using method of chemical admixtures such as superplasticizer and viscosity modifying admixture on the fluidity, bleeding ratio, volumetric change and compressive strength of the grout in order to provide basic data for the development of high-quality grout for prestressed concrete. It appeared that the combination of superplasticizer and viscosity modifying admixture decreased the fluidity of grout with small content of superplasticizer. On the contrary, Grout used more than 0.1% of superplasticizer appeared to have significant effect on the improvement of the fluidity. On the other hand, bleeding of grout reduced according to increasing the content of viscosity modifying admixture. Superplasticizer with less than 0.05% had practically no effect on the reduction of bleeding, whereas superplasticizer with more than 0.1% appear to have significant effect on the reduction of bleeding. Also the combination of superplasticizer with 0.15% and viscosity modifying admixture with 0.15% resulted in satisfactory fluidity accompanied with fair reduction of bleeding and shrinkage of the grout.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.36-39
• /
• 2004

In this study, effects of fluosilicate salt based chemical admixture(MZ) on the watertightness and hardening properties of concrete were investigated. Mix proportions for experiment were modulated at 0.55 of water to cement ratio and addition amount of MZ to $2.0\%$ at intervals $0.5\%$. Compressive strength, porosity and microstructure of hardened concrete cured at several days were executed to evaluate watertightness and hardening properties. It is ascertained that watertightness and hardening properties of concrete could be improved by an adequate addition of fluosilicate salt based chemical admixture.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.339-342
• /
• 2003

This study is intended to investigate the influence of chemical admixture on bleeding of concrete. According to the results, the amount of bleeding with elapse of time does not make much difference in the case of naphthalene type water reducing agent(RN), Naphthalene type high performance water reducing agent(HN) and Melamine type high performance water reducing agent(HM), but it is largest in the case of Polycarbonic acid type high performance water reducing agent(HP). Bleeding speed also is highest in the case of HP in comparison with other chemical admixture. This prove that high performance water reducing agent like HP has little effect on fluidity of concrete, but influences the amount of bleeding more greatly, instead. As properties of hardened concrete, compressive strength makes no difference in the case of RN, HN and HM, but on the other hand, it increases in the case of HP due to a decrease of air content and the large amount of bleeding.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.178-179
• /
• 2019

The purpose of this study was to investigate the possibility as mineral admixture of agriculture by-product. XRD and XRF analysis were performed on rice straw ashes at various combustion temperatures to identify chemical compositions. Also to evaluate properties of pozzolanic reaction, pH change method was tested.

• Journal of the Society of Naval Architects of Korea
• /
• v.40 no.1
• /
• pp.55-62
• /
• 2003

This study has investigated physical and chemical properties of FRP waste, has manufactured polymer cement mortar using a crushed waste with sand and has evaluated its capability to develop the economical waste recycling technology. The study has investigated tension strength, hardness test and impact test as physical properties and also thermogravimetric characteristics and analyzed infrared spectroscope as chemical properties. Then the study has manufactured polymer cement mortar and has analyzed how the FRP waste fine aggregate replacement ratio has an effect on compression strength. Noticing admixture can complement strength drop occurred by the FRP waste fine aggregate replacement, the study examined an optimum rate of admixture addition and its reaction through electron microscope photos.

• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.109-113
• /
• 2003

Concrete and shotcrete should withstand the conditions for which they have been designed, without deterioration, over a period of years. But connote and shotcrete are being deteriorated according to aging by internal and external causes. Recently, many studies on the durability of concrete have been conducted But the durability of shotcrete is rarely studied. So, in this study, chloride ion penetration test freeze and thaw test neutralization test were conducted to examine the durability characteristics of shotcrete with several accelerator and chemical admixture types. These results indicate that shotcrete with allah free accelerator and with superplasticizer are durable. Therefore, the present study provides a fm base to make high performance shotcrete.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.125-131
• /
• 2017

The influences of scatterer and absorber in turbid material by light scattering in concrete admixture were interpreted for the scattered intensity and wavelength. The molecular properties have been studied by Monte Carlo simulation in resin of New Austria Tunnel Method. It has been found that the effects of optical properties in scattering media could be investigated by the optical parameters(${\mu}_s$, ${\mu}_a$,${\mu}_t$). Monte Carlo Simulation method for modelling of light transport in the civil engineering and construction field was applied. The results using a phantom were discussed that the admixture for shrinkage compensating concrete in NATM-rasin from source to detector is measured, and scattering intensity is stronger with those obtained through Monte Carlo Simulation. It may also aid in designing the best model for coatings and corrosion for the durability of metal constructions.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.669-674
• /
• 2001

Electric Arc Furnace Dust (EAF Dust) Is residual dust produced during the manufacturing of metal products from heavily heated electric arc furnace. Many researches have focused on recycling and reusing EAF Dust for industrial and construction purposes. However, most of these researches were aimed at obtaining useful heavy metal powders by treating toxic metallic materials in EAF Dust. Also, few researches dealt with using EAF Dust as admixture in concrete mixture (i.e., slag dust). In this study, EAF Dust is used as admixture in concrete mixture content considering economical feasibility and construction applicability. The concrete specimens mixed with EAF Dust is then tested in compression and tension to study its strength and ductility as well as its failure mechanism. The compression and tension (by split cylinder test) test results are compared to the results from the specimens without EAF Dust to understand the chemical stability and mechanical characteristic of concrete specimens with EAF Dust. For the experiment, 6 types of admixture added concrete were studied: ⑴Combination of EAF Dust and blast-furnace slag in 1 to 1 ratio, ⑵Combination of EAF Dust and blast-furnace slag in 1 to 2 ratio, ⑶EAF Dust only, ⑷blast-furnace slag only, ⑸fly ash only, and ⑹no admixture. The experimental results show that the strength of EAF Dust added specimen has lower early age strength but higher 28 day strength when compared to other specimens. Also, the Elastic Modulus of EAF Dust is higher(28 days) than other specimens. The study results prove that EAF Dust can be used as an effective admixture in concrete for specific usages.

• Korean Journal of Agricultural Science
• /
• v.33 no.2
• /
• pp.167-177
• /
• 2006

This study was performed to evaluate void ratio, compressive and flexural strength, and pH properties according to the admixture ratio of rice husk ash, aggregate size, and neutral treatment time of porous concrete with an admixture of rice husk ash produced as an agricultural by-product. The SEM results for cement mortar with a 5% rice husk ash admixture for the weight of cement formed more C-S-H hydrates due to the $SiO_2$ present in the applied rice husk ash. According to the results of the SEM test, the $SiO_2$ that was a major chemical element of rice husk ash generated a large amount of calcium hydroxide in the early stage of the hydration process of cement leading to the formation of ettringite. The void ratio of porous concrete with an admixture of rice husk ash decreased with increasing admixture ratio of rice husk ash. In addition, the void ratio of porous concrete with an admixture of rice husk ash decreased compared to porous concrete with no admixture of rice husk ash. The compressive and flexural strength of porous concrete with a 5% and 10% admixture ratio of rice husk ash slightly increased compared to concrete with no admixture of rice husk ash. The pH value of porous concrete rapidly decreased immediately after neutral treatment. Then, it gradually increased and decreased again after 14 days. Also, for neutral treatment, the pH value of porous concrete showed appropriate pH levels(less than 9.5) in all mixtures for planting at 28 curing days.