• Journal of Forest and Environmental Science
• /
• v.23 no.1
• /
• pp.51-55
• /
• 2007

The effect of ratio between chemical activating agent and raw material in the preparation of activated carbons from wood has been studied. Pinus koraiensis wood and zinc chloride ($ZnCl_2$) were used for materials in this study. Mixtures of wood and zinc chloride were heated under nitrogen flow in the temperature ranging from room-temperature to $600^{\circ}C$ for 1 hr using thermogravimetric technique. During heat treatment, activated carbons with various pore size and specific surface properties were obtained. The maximum BET surface area and total pore volume were $1468m^2/g$ and 1.74 cc/g, respectively, at the mixture ratio of 1 (wood powder) to 5 ($ZnCl_2$). It can be concluded that the differences in the properties of the activated carbons were related significantly with the ratio of chemical activating regent.

• Resources Recycling
• /
• v.17 no.6
• /
• pp.68-78
• /
• 2008

Using a Pinus koraiensis and Pinus rigida which are normally being discarded in South Korea, optimal conditions of producing activated carbons have been studied to recycle as a higher value-added product. This study consists of two processes, the production process of charcoals from waste timbers by low temperature pyrolysis and the production process of activated carbons from the charcoals by chemical activation reaction. This paper deals with the production process of activated carbons from the charcoals by chemical activation reaction. As an alkali has been generally used as an activating agent, KOH and NaOH which react well with a carbon were used in this study. As a result of the experiments, it is confirmed that activated carbons made with KOH treatment had superior values in physicochemical properties to NaOH, showing that there was no remain of KOH at the surface of the charcoals while there was $3{\sim}4%$ of NaOH remaining after the experiments. Thus, it is concluded that KOH reacted more actively with a charcoal than NaOH. Moreover, it was also found that values in physicochemical properties when using a Pinus koraiensis are superior to the ones when using a Pinus rigida. The optimal mixing ratio of an activating agent to a charcoal was 400 wt.%. To improve the physicochemical properties, activated carbons were washed out by distilled water after neutralization with SM hydrochloric acid solution. When activated carbons were produced from a Pinus koraiensis in this optimal conditions, value of BET surface area was found to be approx. $2400\;m^2/g$.

• Carbon letters
• /
• v.4 no.3
• /
• pp.126-132
• /
• 2003

Granular Activated Carbon (GAC) has been proven to be an excellent material for many industrial applications. A systematic study has been carried out of the kinetics of physical as well as chemical activation of phenolic resin chars. Physical activation was carried out using $CO_2$ and chemical activation using KOH as activating agent. There are number of factors which influence the rate of activation. The activation temperature and residence time at HTT varied in the range $550{\sim}1000^{\circ}C$ and $\frac{1}{2}{\sim}8$ hrs respectively. Kinetic studies show that the rate of chemical activation is 10 times faster than physical activation even at much lower temperature. Above study show that the chemical activation process is suitable to prepare granular activated carbon with very high surface area i.e.$ 2895\;m^2/g$ in short duration of time i.e. 1 to 2 hrs at lower temperature i.e. $750^{\circ}C$ from phenolic resins.

• Clean Technology
• /
• v.15 no.1
• /
• pp.31-37
• /
• 2009

This study deals with the production process of activated carbons from the sewage sludge char by chemical activation reaction. KOH and NaOH were used as activating agents, which react well with carbon. From the experiments, it was found that activated carbons made with KOH treatment had better physicochemical properties in terms of iodine number and BET value than those made with NaOH treatment. It was also found that the optimal deposition ratio of an activating agent to the sewage sludge char was 75 wt% of KOH and 50 wt% of NaOH. Activated carbons were washed out by distilled water after neutralization with 5 M hydrochloric acid solution. The activated carbons that were produced from a sewage sludge char at this optimal conditions have BET surface areas of approximately $600m^2/g$.

• Journal of Powder Materials
• /
• v.17 no.4
• /
• pp.281-288
• /
• 2010

A carbon doped $TiO_2$ (C-$TiO_2$) photocatalyst, which shows good photocatalytic activity to Ultraviolet irradiation and visible irradiation, was successfully prepared by co-grinding of $TiO_2$ with ethanol or Activated Carbon(C), followed by heat treatment at $200^{\circ}C$ in air for 60 min. Ethanol and C were used as a representative agent of liquid and solid for carbon doping. Their influence on improving photocatalytic ability and carbon doping degree was studied with degradation of methyl orange and XPS analysis. The product prepared by co-grinding of $TiO_2$ with Ethanol had Ti-C and C-O chemical bonds and showed higher photocatalytic activity than the product prepared by co-grinding of $TiO_2$ with C, where just C-O chemical bond existed. As a result, mechanochemical route is useful to prepare a carbon doped $TiO_2$ photocatalyst activating to visible irradiation, where the solid-liquid operation is more effective than solid-solid operation to obtain a carbon doped $TiO_2$.

• Carbon letters
• /
• v.2 no.2
• /
• pp.105-108
• /
• 2001

In this work, the activated carbons (ACs) with high micropores were synthesized from the polystyrene (PS) with KOH as activating agent. And the influence of activation temperature on porosity of the ACs studied was investigated. The porous structures of ACs were characterized by nitrogen adsorption at 77K using BET and D-R equations, and MP and BJH methods. The weight loss behaviors of the samples impregnated with KOH were also monitored using thermogravimetric analyzer (TGA). As a result, it was found that the samples could be successfully converted into ACs with well-developed micropores. From the results of pore size analysis, it was confirmed that elevated activation temperature does lead to the formation and deepening of microstructures without significant change in mesostructures. A thermogravimetric study showed that KOH could suppress the thermal decomposition of the sample, resulting in the increase of carbon yields.

• Carbon letters
• /
• v.8 no.2
• /
• pp.134-136
• /
• 2007

In this work, activated carbons (ACs) were prepared from polystyrene-based cation-exchangeable resin (PSI) by a chemical activation with KOH as an activating agent. The surface morphologies were observed by using SEM, and the textural properties were investigated by using nitrogen adsorption at 77 K. From the experimental results, it was found that the well-developed micro- and mesopores were produced by a chemical activation, and the textural properties including specific surface areas and pore volumes were greatly enhanced. The electrochemical behaviors of the ACs showed similar phenomena with that of textural properties. These results indicated that KOH activation played an important role in the changes of surface, and pore structures, resulting in enhancing the electrochemical properties of the ACs prepared in present work.

• Elastomers and Composites
• /
• v.51 no.2
• /
• pp.81-92
• /
• 2016

1,3-Diphenylguanidine (DPG) is commonly used as a secondary accelerator which not only acts as booster of cure but also activating silanization reaction. The aim of this study is to increase the interaction between silica and rubber by using DPG. In this study, mixing was proceeded in two steps. The T-1 compound is mixed DPG with silica and silane coupling agent in the kneader at high temperature which is named as $1^{st}$ mixing step. T-3 compound is mixed DPG with curatives in the two-roll mill at low temperature which is named as $2^{nd}$ mixing step. The T-2 compound is mixed a half of DPG in $1^{st}$ mixing step and the remainder is mixed in $2^{nd}$ mixing step. Total DPG content was equal for all compounds. When DPG is mixed with silica, silane coupling agent during the $1^{st}$ mixing step, a decrease in cure rate and an increase in scorch time can be seen. This indicates that DPG is adsorbed on the surface of silica. during rubber processing. However, bound rubber content is increased and dynamic properties are improved. These results are due to the highly accelerated silanization reaction. However, there are no significant difference in 100%, 300% modulus.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.93.2-93.2
• /
• 2011

In this work, graphite nanofibers (GNFs) were prepared for using catalyst supports in fuel cells. The GNFs were chemically activated to obtain high surface area and small pore diameter with different potassium hydroxide (KOH) amounts, i.e., 0, 1, 3, 4, and 5 g as an activating agent. And then Pt-Ru was deposited onto activated GNFs (A-GNFs) by chemical reduction method. The characteristics of Pt-Ru catalysts deposited onto A-GNFs were determined by specific surface area and pore size analyzer, X-ray diffraction (XRD), transmission electron microscopy (TEM), and inductive coupled plasma-mass spectrometer (ICP-MS). The electrochemical properties of Pt-Ru/A-GNFs catalysts were also analyzed by cyclic voltammetry (CV) experiments. From the results, the A-GNFs carbon supports activated with 4 g of KOH (A4g-GNFs) showed that the highest specific surface areas. In addition, the A4g-GNFs led to uniform dispersion of Pt-Ru onto A4g-GNFs, resulting in the enhancement of electrochemical activity of Pt-Ru catalysts.

• Carbon letters
• /
• v.9 no.3
• /
• pp.203-209
• /
• 2008

The objective of this work is to study the feasibility of the preparation of the activated carbon (AC) from coconut tree flowers using high temperature fluidized bed reactor (HTFBR). The activating agent used in this work is steam. The reactor was operated at various activation temperature (650, 700, 750, 800 and $850^{\circ}C$) and activation time (30, 60, 120 and 240 min) for the production of AC from coconut tree flowers. Effect of activation time and activation temperature on the quality of the AC preparation was observed. Prepared AC was characterized in-terms of iodine number, methylene blue number, methyl violet number, ethylene glycol mono ethyl ether (EGME) surface area and SEM photographs. The best quality of AC from coconut tree flowers (CFC) was obtained at an activation temperature and time of $850^{\circ}C$ and 1 hr restectively. The effectiveness of carbon prepared from coconut tree flowers in adsorbing crystal violet from aqueous solution has been studied as a function of agitation time, carbon dosage, and pH. The adsorption of crystal violet onto AC followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity $q_m$ was 277.78 mg/g., equilibrium time was found to be 180 min. This adsorbent from coconut tree flowers was found to be effective for the removal of CV dye.