• Bulletin of the Korean Chemical Society
• /
• v.30 no.1
• /
• pp.214-218
• /
• 2009

Second-order rate constants ($k_N$) have been measured for nucleophilic substitution reactions of S-4-nitrophenyl thiobenzoate with a series of alicyclic secondary amines in $H_2O$ containing 20 mol % DMSO at 25.0 ${\pm}$ 0.1 ${^{\circ}C}$. The Br$\phi$nsted-type plot exhibits a downward curvature, i.e., $\beta_{nuc}$ decreases from 0.94 to 0.34 as the amine basicity increases. The reactions in the aqueous DMSO have also been suggested to proceed through a zwitterionic tetrahedral intermediate (T${\pm}$) with change in the RDS on the basis of the curved Br$\phi$nsted-type plot. The reactions in the aqueous DMSO exhibit larger $k_N$ values than those in the aqueous EtOH. The macroscopic rate constants ($k_N$) for the reactions in the two solvent systems have been dissected into the microscopic rate constants ($k_1\;and\;k_2/k_{-1}$ ratio) to investigate effect of medium on reactivity in the microscopic level. It has been found that the $k_2/k_{-1}$ ratios are similar for the reactions in the two solvent systems, while $k_1$ values are larger for the reactions in 20 mol % DMSO than for those in 44 wt % EtOH, indicating that the larger $k_1$ is mainly responsible for the larger $k_N$. It has been suggested that the transition state is more stabilized in 20 mol % DMSO through mutual polarizability interaction than in 44 wt % EtOH through H-bonding interaction.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.260-266
• /
• 1988

The rate constants for the nucleophilic addition reactions of thioglycolic acid and cysteine to ${\beta},\;{\beta}$-dichlorostyrene derivatives(p-H, p-Cl, $p-CH_3,\;and\;p-OCH_3$) were photochemically determined at various pH and a rate equation which can be applied over a wide pH range was obtained. On the bases of rate equation, general base catalysis and substituent effect, the plausible addition reaction mechanism was proposed: Above pH 9.0, the reaction was initiated by the addition of sulfide anion, and in the range of pH 7.0 to 9.0, the neutral molecules and it's anions attacked to the double bond, competitively. However, below pH 7.0, only the neutral molecules of thioglycolic acid or cysteine added to the carbon-carbon double bond.

• Journal of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.150-154
• /
• 1980

Kinetic studies of the reaction of benzyl benzenesulfonate with pyridine in acetone were carried out by the electric conductivity method under 1 to 2000 bars and at 20 to $40^{\circ}C$. The rate increases with increasing pressure and temperature. The activation enthalpy $({\Delta}H^{\neq}),\;entropy\;({\Delta}S^{\neq})$ and activation volume $({\Delta}V^{\neq})$ of the reaction are obtained by the above experiment. The isokinetic relationship between $({\Delta}H^{\neq})\;and\;({\Delta}S^{\neq})$ for pressure change in the reaction was shown, and its isokinetic temperature was $342^{\circ}K$. From all of the above results it was found that this reaction precedes on the $S_N2$ reaction mechanism in which the rate of the reaction was determined by $C{\cdots}N$ bond formation at transition state.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.127-134
• /
• 1989

The rate constants of the nucleophilic addition reaction of 3-mercaptopropionic acid to the ${\beta},\;{\beta}$-diethoxycarbonylstryene derivatives (H, p-OCH$_3$, 3,4,5-(OCH$_3)_3$, 3,4-methylenedioxy) were determined by ultraviolet spectrophotometry, and rate equation which could be applied over a wide pH range was obtained. On the basis of pH-rate profile and the presence of general base catalysis, a plausible mechanism of this addition reaction was propound:Below pH 6.0 the reaction was initiated by the addition of neutral 3-mercaptopropionic acid molecule, and in the range of pH 6.0∼8.0, a neutral 3-mercaptopropionic acid molecule and a sulfide anion competitively attacked to the double bond. Above pH 8.0, the reaction proceeded through the addition of a sulfide anion.

• Journal of the Korean Chemical Society
• /
• v.32 no.3
• /
• pp.179-185
• /
• 1988

The reaction of VO_2\;^+$ with benzyl alcohol in perchloric acid and aqueous dimethylformamide leads to the formation of $VO^{2+}$ and benzaldehyde. The products, $VO^{2+}$ and benzaldehyde, are identified by infrared spectroscopy and gas chromatography. Kinetic studies on the reaction of VO_2\;^+$ with benzyl alcohol have been carried out using visible spectroscopy. The empirical rate equation can be expressed as $-d[VO_2\;^+]/dt=2\{\\{k_O+k_H[HClO_4]\}\[VO_2\;^+][C_6H_5CH_2OH]$ The rate determining step for the reaction is the process for the formation of $VO^{2+}$ and $C_6H_5CHOH$. The activation parameters are ${\Delta}H^{\neq}=13.32{\pm}1.73\;kcalmol^{-1}$ and ${\Delta}S^{\neq}=-31.02{\pm}0.09\;calmol^{-1}K^{-1}$ for the oxidation of benzyl alcohol in aqueous dimethylformamide.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.31-36
• /
• 1989

The second-order rate constants for the nucleophilic substitution reactions of para-substituted benzyl nitrates with para-substituted anilines in acetonitrile were conductometrically determined. Hammett ${\rho}$x and ${\rho}$y values and Bronsted ${\beta}$ values were obtained from these kinetic data. The reactions of Benzyl nitrates with the series of anilines showed linear Hammett plots with negative slopes. For the change of substituents in the benzyl nitrates, nonlinear Hammett plots with a concave upwards curve were obtained. We applied the potential energy surface and the quantum mechanical models in order to examine the transition state variations caused by changes in substituents on the nucleophile and the substrate. The results showed that the reaction was proceeded via the $S_{N}2$-type reaction mechanism in which the extent of bond-formation was greatly changed depending on the property of the substituents in substrate.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.11
• /
• pp.1166-1172
• /
• 1997

[FeⅢ(BLPA)DBC]BPh4, a new functional model for the catechol dioxygenases, has been synthesized, where BLPA is bis((6-methyl-2-pyridyl)methyl)(2-pyridylmethyl)amine and DBC is 3,5-di-tert-butylcatecholate dianion. The BLPA complex has a structural feature that iron center has a six-coordinate geometry with N4O2 donor set. It exhibits EPR signals at g=5.5 and 8.0 which are typical values for the high-spin FeⅢ (S=5/2) complex with axial symmetry. The BLPA complex reacts with O2 within a few hours to afford intradiol cleavage (75%) and extradiol cleavage (15%) products which is very unique result of all [Fe(L)DBC] complexes studied. The iron-catecholate interaction of BLPA complex is significantly stronger, resulting in the enhanced covalency of the metal-catecholate bonds and low energy catecholate to FeⅢ charge transfer bands at 583 and 962 nm in CH3CN. The enhanced covalency is also reflected by the isotropic shifts exhibited by the DBC protons, which indicate increased semiquinone character. The greater semiquinone character in the BLPA complex correlates well with its high reactivity towards O2. Kinetic studies of the reaction of the BLPA complex with 1 atm O2 in CH3OH and CH2Cl2 under pseudo-first order conditions show that the BLPA complex reacts with O2 much slower than the TPA complex, where TPA is tris(2-pyridylmethyl)amine. It is presumably due to the steric effect of the methyl substituent on the pyridine ring. Nevertheless, both the high specificity and the fast kinetics can be rationalized on the basis of its low energy catecholate to FeⅢ charge transfer bands and large isotropic NMR shifts for the BLPA protons. These results provide insight into the nature of the oxygenation mechanism of the catechol dioxygenases.

• Korean Chemical Engineering Research
• /
• v.59 no.4
• /
• pp.493-502
• /
• 2021

We prepared and investigated a biosynthesized nanoparticulate system with high adsorption and release capacity of letrozole. Silver nanoparticles (AgNPs) were biosynthesized using olive leaf extract. Cysteine was capped AgNPs to increase the adsorption capacity and suitable interaction between nanoparticles and drug. Morphology and size of nanoparticles were confirmed using transmission electron microscopy (TEM). Nanoparticles were spherical with an average diameter of less than 100 nm. Cysteine capping was successfully confirmed by Fourier transform infrared resonance (FTIR) spectroscopy and elemental analysis (CHN). Also, the factors of letrozole adsorption were optimized and the linear and non-linear forms of isotherms and kinetics were studied. Confirmation of the adsorption data of letrozole by cysteine capped nanoparticles in the Langmuir isotherm model indicated the homogeneous binding site of modified nanoparticles surface. Furthermore, the adsorption rate was kinetically adjusted to the pseudo-second-order model, and a high adsorption rate was observed, indicating that cysteine coated nanoparticles are a promising adsorbent for letrozole delivery. Finally, the kinetic release profile of letrozole loaded modified nanoparticles in simulated gastric and intestinal buffers was studied. Nearly 40% of letrozole was released in simulated gastric fluid with pH 1.2, in 30 min and the rest of it (60%) was released in simulated intestinal fluid with pH 7.4 in 10 h. These results indicate the efficiency of the cysteine capped AgNPs for adsorption and release of drug letrozole for breast cancer therapy.

• Korean Chemical Engineering Research
• /
• v.46 no.5
• /
• pp.922-930
• /
• 2008

The selective non-catalytic reduction(SNCR) performance is sensitive to the process parameters such as flow velocity, reaction temperature and mixing of reagent(ammonia or urea) with the flue gases. Therefore, the knowledge of the velocity field, temperature field and species concentration distribution is crucial for the design and operation of an effective SNCR injection system. In this work, a full-scale two-dimensional computational fluid dynamics(CFD)-based reacting model involving a droplet model is built and validated with the data obtained from a pilot-scale urea-based SNCR reactor installed with a 150 kW LPG burner. The kinetic mechanism with seven reactions for nitrogen oxides($NO_x$) reduction by urea-water solution is used to predict $NO_x$ reduction and ammonia slip. Using the turbulent reacting flow CFD model involving the discrete droplet phase, the CFD simulation results show maximum 20% difference from the experimental data for NO reduction. For $NH_3$ slip, the simulation results have a similar tendency with the experimental data with regard to the temperature and the normalized stoichiometric ratio(NSR).

• Applied Chemistry for Engineering
• /
• v.9 no.5
• /
• pp.742-748
• /
• 1998

Experiments have been conducted to investigate synergistic effects and mechanisms of the Alaskan subbituminous coal/polypropylene (PP). Coliquefaction of coal/PP gave the synergistic effect in yields by 17% compared to independent liquefactions of coal or PP at $430^{\circ}C$. To analyse coliquefaction mechanisms, the second and zeroth order kinetic models were developed for coal and PP conversions respectively. When the models were simulated to fit coliquefaction results, those represented results successfully with the correlation coefficient of 0.99. The amount of tetralin needed to liquefy unit mass of coa 1(${\beta}$) was also calculated using the developed model. According to the calculated results, $\beta$ increased from 0.4 to 1.0 as the coliquefaction temperature increased from $410^{\circ}C$ to $470^{\circ}C$. This indicated that tetralin lowered the molecular weight of oil produced, and this phenomenon was recognized by the GPC analyses. Furthermore, it was found that tetralin prohibited the liquefaction of PP when coal was not added. On the other hand, tetralin was believed to act as a hydrogen-donor solvent to coal rather than prohibit PP liquefaction during coliquefaction. Therefore, the liquefaction rate of PP increases and synergistic effects in oil yields are mainly due to the increase in PP liquefaction during coal/PP coliquefaction.