• Corrosion Science and Technology
• /
• 제18권4호
• /
• pp.129-137
• /
• 2019

CFRP (Carbon Fiber Reinforced Plastics) is composed of carbon fiber and plastic resin, and is approximately 20 - 50% lighter than metallic materials. CFRP has a low density, higher specific stiffness, specific strength, and high corrosion resistance. Because of these excellent properties, which meet various regulation conditions needed in the industrial fields, CFRP has been widely used in many industries including aviation and ship building. However, CFRP reveals water absorption in water immersion or high humidity environments, and water absorption occurs in an epoxy not carbon fiber, and can be facilitated by higher temperature. Since these properties can induce volume expansion inside CFRP and change the internal stress state and degrade the chemical bond between the fiber and the matrix, the mechanical properties including bond strength may be lowered. This study focused on the effects of NaCl concentration (0.01 - 1% NaCl) and solution temperature ($30-75^{\circ}C$) on the galvanic corrosion between CFRP and A516Gr.55 carbon steel. When NaCl concentration increases 10 times, corrosion rate of a specimen was not affected, but that of galvanic coupled carbon steel increased by 46.9% average. However, when solution temperature increases $10^{\circ}C$, average corrosion rate increased approximately 22%, regardless of single or galvanic coupled specimen.

• 한국산학기술학회논문지
• /
• 제19권12호
• /
• pp.600-606
• /
• 2018

금속화재는 나트륨(Na), 리튬(Li) 등과 같은 가연성 금속이 연소하는 화재이다. 일반적인 물계, 가스계 소화약제에는 적응성이 없으며 금속화재용 소화약제 또는 건조사로 화재를 진화할 수 있다. 위험물안전관리법상 가연성 금속에 속하는 2류 및 3류 위험물 화재가 최근 5년간 104건이 발생했으며, 가연성 금속을 사용하는 연료전지, 반도체 산업의 발전으로 화재 건수는 더욱 증가할 것으로 예상되고 있다. 하지만 국내에는 금속화재와 관련된 법적 기준이 마련되어 있지 않아 금속화재용 소화약제 및 소화기 개발은 물론 화재 예방 및 대응 시스템 구축이 이루어지지 않고 있다. 이에 본 연구에서는 금속화재의 위험성을 감소시킬 수 있는 방안을 마련하기 위해 국내외 관련 법령 분석 및 금속화재 사례 11건을 분석하였다. 이를 통해 금속화재의 위험성을 감소를 위해 관련 법령 마련에 필요한 요소를 도출하였으며 금속화재 발생 시 소화약제로 사용되고 있는 건조사의 관리 및 지원방안을 제시하였다. 또한, 금속화재의 예방 및 대응에 필요한 안전교육 및 시설 관리 방안을 제시하였다.

• 한국양봉학회지
• /
• 제34권4호
• /
• pp.315-323
• /
• 2019

Large amounts of sludge produced by paper mill industries represent one of the most serious environmental problems in the world. Recently, beekeepers living in the neighborhood of the paper mill in Hwasan County, Youngcheon city, GB, Korea, became alarmed that honey bee colonies were dying off suddenly across the neighborhood. A preliminary study was conducted to evaluate the toxicity (oral, fumigation, repellent) of recycled solid paper mill sludge (SPMS) and leachate paper mill sludge (LPMS) to honey bee workers under laboratory conditions, and to analyze the volatile organic compounds(VOC). The SPMS and LPMS were separately subjected to a liquid-liquid extraction (LLE) at three temperatures to extract VOC(highest VOC yields: 1.52% SPMS and 0.34% LPMS). A total of 70 chemicals were detected in the VOC of paper mill sludges, of which 49 and 21 volatile organic compounds from SPMS and LPMS, respectively. The SPMS was dominated by high degree presence of stanols (saturated sterols), such as cholestanol, cholestan-3-ol and also saturated hydrocarbons. However, LPMS was characterized by the absence of sterols. Both SPMS and LPMS showed an influence on the olfactory behavior of honey bee on Y-tube assay, with repulsion rates of 72 and 68%, respectively. Both SPMS and LPMS at concentration of 100mg/mL caused higher honey bee oral mortality than the untreated controls at 48, 72, 96 and 120 hours after treatment(highest oral mortality at 120 hr: 85.74%(SPMS); 93.51 % (LPMS)). A similar pattern was observed when honey bees were tested to fumigant toxicity. Both SPMS and LPMS caused significant higher mortality than the untreated control 24 hour after the exposure (highest fumigation mortality at 120 hr: 69.4% (SPMS); 56.8% (LPMS)). These preliminary results indicated that paper mill sludge could be partly responsible for sudden death and disappearance of honey bees, especially in hot humid summer days. With climate change, the risk of environmental chemical exposure to honey bee would pose greater attention.

• 멤브레인
• /
• 제31권6호
• /
• pp.393-403
• /
• 2021

생체 내 변화에서 효소는 중요한 촉매이다. 효소의 안정성과 재사용성은 촉매 과정에서 중요한 요소이다. 적합한 기질에 효소 고정화는 특정 미세환경의 조성을 통해 효소 활동성을 높인다. 다양한 종류의 분리막이 각각의 생체적합성과 막 표면의 친수성/소수성 조절 용이도에 따라 기질로 사용되었다. 본 논문에서는 셀룰로스, 폴리아크릴로니트릴(PAN), 폴리디메틸실록산(PDMS), 폴리비닐리덴플루오라이드(PVDF), 폴리에테르설폰(PES) 고분자 분리막이 소개되고 토의되었다. 고정화 효소를 이용한 유기오염물의 생물적 분해는 제약 회사 및 섬유 회사 등에서 발생하는 오염물질을 친환경적으로 감소할 수 있는 방법이다. 효소 고정화 생물반응기(EMBR)로 기름의 가수분해를 제어할 수 있고 이를 통해 탄소 배출량 감소 및 환경오염을 줄일 수 있다. EMBR로 만들 수 있는 바이오에탄올과 바이오디젤은 화석 연료의 대체제이다.

• 멤브레인
• /
• 제32권2호
• /
• pp.100-108
• /
• 2022

다양한 산업 중에서 섬유 산업은 섬유 염색을 위해 가장 많은 양의 물을 사용하는데, 이는 여러 종류의 염료를 포함한 폐수의 방대한 배출로 이어진다. 염료의 제거를 위한 방법에는 오존 처리, 흡착 등의 다양한 처리 방법이 존재한다. 하지만 이러한 처리 방법은 폐수 재사용의 문제로 인해 처리 가격이 상승하기 때문에 성공적이지 못하다. 이에 대한 대안으로 막분리 공정이 폐수의 염료 처리를 위한 가장 적절한 기술로 보고되고 있다. 이때 사용되는 분리막은 고분자 분리막과 세라믹 분리막으로 나눌 수 있다. 세라믹 분리막의 장점에는 세척의 용이함, 긴 수명, 내열성, 내화학성, 그리고 기계적 안정성이 있다. 세라믹 분리막은 다양한 원료로 만들 수 있으며, 점토, 제올라이트, 플라이 애시와 같은 천연 재료는 저렴하고 구하기 용이하다. 본 리뷰에서 폐수처리는 크게 한외여과(ultrafiltration), 정밀여과(microfiltration), 그리고 나노여과(nanofiltration) 세가지 공정으로 나누어져 있다.

• Geomechanics and Engineering
• /
• 제28권3호
• /
• pp.255-263
• /
• 2022

Lime stabilization has conventionally been listed amid the key techniques of chemical stabilization. Replacing lime with sustainable agro-based by-products have gained prominence in recent decades. Bagasse ash (BA) is one such potential alternatives, an industrial waste with abundance in production, and industries exploring sustainable solutions for its safe disposal. Supplementing BA with lime could be an ideal approach to reduce lime consumption. However, suitability of BA and lime for the stabilization of expansive clays, such as black cotton (BC) soil is yet to be explored. This paper therefore aims to investigate the suitability of BA-lime mixtures to stabilize BC soil with emphasis to compaction behaviors and unconfined compressive strength (UCS) using standard laboratory procedures. Suitability of BA-lime mixture is then assessed against addition of calcium sulphate which, from previous experience, is detrimental with lime stabilization. Experimental outcomes nominate 15% BA as the optimum value observed from both compaction and UCS data, while addition of 4% lime to 15% BA showed the best results. Mineralogical and microstructural analysis show the presence of cementitious compounds with addition of lime and calcium sulphate with curing periods. While, formation of Ettringite needles were noted with the addition of calcium sulphate in BA-lime mixtures (at optimum values) after 90-day curing, and UCS results showed a decrease at this point. To this end, addition of BA in lime stabilization showed encouraging results as assessed from the compaction and UCS results. Nonetheless usage of calcium salts, with utmost emphasis on calcium sulphate and equivalent should be avoided.

• 센서학회지
• /
• 제31권2호
• /
• pp.102-106
• /
• 2022

Currently, the demand for real-time monitoring of water quality has increased dramatically. Total organic carbon (TOC) analysis is a suitable method for real-time analysis compared with conventional biochemical oxygen demand (BOD) and chemical oxygen demand (COD) methods in terms of analysis time. However, this method is expensive because of the complicated internal processes involved. The photocatalytic titanium dioxide (TiO2)-based TOC method is simpler as it omits more than three preprocessing steps. This is because it reacts only with organic carbon (OC) without extra processes. We optimized the rate between the TiO2 photocatalyst and binder solution and the TiO2 concentration. The efficiency was investigated under 365 nm UV exposure onto a TiO2 coated substrate. The optimized conditions were sufficient to apply a real-time monitoring system for water quality with a short reaction time (within 10 min). We expect that it can be applied in a wide range of water quality monitoring industries.

• Journal of the Korean Wood Science and Technology
• /
• 제50권6호
• /
• pp.414-426
• /
• 2022

The Lauraceae family has commercial uses, such as in the food, pharmaceutical, and perfume industries. This study was conducted to investigate anti-asthmatic activity of essential oils from the seven species in the Lauraceae family. The essential oils were extracted from the leaves of seven species, and the chemical composition was investigated by gas chromatography-mass spectrometry. The major constituents of essential oils differed depending on the species, even if they belonged to the same family. The main constituents were camphor (89.09%) in Cinnamomum camphora, linalool (26.91%) in Cinnamomum cassia, 1,8-cineole (23.90%) in Cinnamomum japonicum, d-limonene (10.27%) and β-eudesmol (10.03%) in Lindera obtusiloba, δ-cadinene (13.85%) and α-phellandrene (11.57%) in Machilus japonica, cis-,trans-β-ocimene (13.80% and 12.06%) and elemol (11.46%) in Neolitsea aciculata, and cis-β-ocimene (37.94%) and sabinene (24.91%) in Neolitsea sericea. The anti-asthmatic activity of essential oils was investigated using the lipopolysaccharide-induced NCI-H292 cells. The relative expression levels of the pro-inflammatory cytokines [interleukin (IL)-1β and IL-6] and mucus gene (MUC5AC and MUC5B) were significantly reduced by essential oils from seven species in the Lauraceae family. Among the seven essential oils, the essential oil from L. obtusiloba had the most superior anti-asthmatic activity. These results suggest that the essential oil of L. obtusiloba leaves could be used as an agent to suppress mucus hypersecretion.

• 한국염색가공학회지
• /
• 제35권1호
• /
• pp.8-19
• /
• 2023

Silicone rubber is widely used in most industries due to diverse advantages like heat stability, UV stability, durability, chemical resistance, environment friendliness, inertness and so on. But there is limitation to expand applications due to relatively weak rubber strengths such as tensile strength and tear strength, especially in fabric coating applications. The purpose of this study is to find influence of coating agent on performances of rubber and coated fabrics and their correlation according to different crosslinking densities of silicone rubbers. Addition cure type of silicones were formulated using crosslinked MQ-type silicone resin consisting of M (R₃SiO_1/2) and Q (SiO_4/2) and linear polymers. Raw materials used were; 1) linear vinyl endblocked polymers and vinyl functional MQ resin as main polymers, 2) linear silicone hydride polymers as crosslinkers, 3) platinum catalyst and 4) inhibitor to control curing speed. Rubber specimens were prepared to check mechanical strength using universal testing machine (UTM). Crosslinking density was calculated using Flory-Rhener equation using solvent swelling method. Differential scanning calorimetry (DSC) and scanning electron microscope (SEM-EDS) were used to characterize rubbers. Consequently, it was found that physical properties of silicone rubbers and coated fabrics can be expected by crosslinking density of rubbers. Silicone rubber formulations that contain 20 ~ 30 wt% of vinyl MQ resin showed strongest balanced performances.

• Applied Microscopy
• /
• 제50권
• /
• pp.2.1-2.7
• /
• 2020

Electron energy loss spectroscopy (EELS) is an analytical technique that can provide the structural, physical and chemical information of materials. The EELS spectra can be obtained by combining with TEM at sub-nanometer spatial resolution. However, EELS spectral information can't be obtained easily because in order to interpret EELS spectra, we need to refer to and/or compare many reference data with each other. And in addition to that, we should consider the different experimental variables used to produce each data. Therefore, reliable and easily interpretable EELS standard reference data are needed. Our Electron Energy Loss Data Center (EELDC) has been designated as National Standard Electron Energy Loss Data Center No. 34 to develop EELS standard reference (SR) data and to play a role in dissemination and diffusion of the SR data to users. EELDC has developed and collected EEL SR data for the materials required by major industries and has a total of 82 EEL SR data. Also, we have created an online platform that provides a one-stop-place to help users interpret quickly EELS spectra and get various spectral information. In this paper, we introduce EEL SR data, the homepage of EELDC and how to use them.