• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.314-319
• /
• 2011

In this study, the flow behavior of Newtonian and non-Newtonian coating liquids inside slot die has been scrutinized for the purpose of optimal internal die design in slot coating system from three-dimensional computations by CFD Fluent solver. A hybrid slot die could be optimally designed by changing the chamber or manifold structure to guarantee the uniform velocity distribution of coating liquids at die exit. Especially, for the non-Newtonian coating liquids, the length of coat-hanger for the uniform coating has been properly chosen, according to the degree of their shearthinning properties.

• Korea-Australia Rheology Journal
• /
• v.11 no.3
• /
• pp.233-240
• /
• 1999

In order to understand the flow behavior of Electrorheological (ER) fluid, dynamic simulation has been intensively performed for the last decade. When the shear flow is applied, it is easy to carry out the simulation with relatively small number of particles because of the periodic boundary condition. For the squeezing flow, however, it is not easy to apply the periodic boundary condition, and the number of particles needs to be increased to simulate the ER system more realistically. For this reason, the simulation of ER fluid under squeezing flow has been mostly performed with some representative chains or with the approximation that severely restricts the flow geometry to reduce the computational load. In this study, Message Passing Interface (MPI), which is one of the most widely-used parallel processing techniques, has been employed in a dynamic simulation of ER fluid under squeezing flow. As the number of particles used in the simulation could be increased significantly, full domain between the electrodes has been covered. The numerical treatment or the approximation used to reduce the computational load has been evaluated for its validity, and was found to be quite effective. As the number of particles is increased, the fluctuation of the normal stress becomes diminished and the prediction in general was found to be qualitatively In good agreement with the experimental results.

• Journal of the Semiconductor & Display Technology
• /
• v.11 no.2
• /
• pp.75-80
• /
• 2012

Polymer composites which have electrical properties have been studied in various industries. The Multi-walled carbon nanotube (MWCNT) are thought to be reinforcements for polymers because of their high aspect ratio and specially mechanical, thermal and electrical properties. We introduced MWCNT and impact modifier in order to improve thermal and mechanical properties of Polyphenylene sulfide (PPS) and give electric characteristic to PPS. The thermal properties were investigated by Differential scanning calorimeter (DSC) and Thermogravimetric analysis (TGA). The morphology, mechanical properties and electrical characteristic were performed by Field emission scanning electron microscopy (FE-SEM), Izod impact tester and surface resistance meter. As a result, we could find that the PPS/MWCNT composites have high conductivity and good mechanical properties than neat PPS resin.

• Journal of the Korean institute of surface engineering
• /
• v.57 no.3
• /
• pp.221-224
• /
• 2024

The 304 stainless steel has good corrosion resistance, so it is used in various industries. However, in an environment like seawater, stainless steel can be damaged by chloride ions, resulting in surface corrosion such as pitting and crevice corrosion. Electropolishing is a technique that smooths the surface and creates a passivation layer that can resist corrosion. In this study, electropolishing was applied as a surface finish to increase the smoothness of the metal surface and its corrosion resistance. We confirmed the topology of the electropolished surface of stainless steel by optical microscope and evaluated the corrosion resistance characteristics of electropolished stainless steel through a potentiodynamic experiment.

• New & Renewable Energy
• /
• v.9 no.3
• /
• pp.20-28
• /
• 2013

The gasification process has developed to convert coal into the more useful energy and material since decades. Despite the numberous design of ones, entrained flow gasifier of the major companies has had an advantage on the market. Because it has a merit of full-scale and high performance plant. In this paper, the gasification technologies of GE energy, Phillips, Siemens and Shell have been reviewed to compare their characteristics and a high performance gasification process was suggested. And the simulation model of gasifiers using Aspen Plus offered the quantitative comparison data for difference designs. The simulation results revealed the poor performance of the slurry feed than dry design. The corresponding cold gas efficiency of 77% is much lower than the 80.3% for the dry feed cases. The exergy analysis of the difference syngas quenching system showed that chemical quenching is superior to another. The results of analysis recommend the two stage gasifier with dry multi-feeder as the energy effective design.

• Journal of the Korean Society of Safety
• /
• v.13 no.1
• /
• pp.98-104
• /
• 1998

Recently, industrial accidents have occurred in various patterns due to the diversity of industries and the integration of facilities. Especially, the major accidents affect broad area and result in huge loss of lives and properties. Domestic researches on techniques for keeping away from such hazardous danger have been actively performed but their activities are limited in some institutes and universities. In advanced countries, integrated management systems like Seveso Directive of EU and OSHA(Occupational Safety and Health Act) of U.S.A. have been legislated along with the systematic research activities. In Korea, the integrated safety management systems called SMS(Safety Management System) and PSM(Process Safety Management) have been applied to major industries. These systems made chemical industries manage the process safety information by collecting and arranging safety data by themselves. In order to implement the system successfully, it is urgently required to prepare a tool for searching and accumulating process safety data systematically. In this study, a computerized prototype of Risk Assessment System which is essential to SMS and PSM was developed as a main system and data base as subsystem to handle safety information.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.227-234
• /
• 2022

Wastewater is released from leather, textile, paint, wood, or dye processing industries as well as petroleum refining industries. Wastewater from these industries contains water pollutant such as heavy metals and nitrogen compounds and has high chemical oxygen demand (COD). While there various filtering pollutants from wastewater for safe disposal, membrane-based technology is one of the most efficient methods for its high efficiency and low cost. Among various membranes, zeolite membranes gain spotlight for its cost-effectiveness and have undergone a lot of research. This review is focused on recent progress in zeolite membrane for wastewater treatment in following order: i) wastewater treatment, ii) microfiltration membrane, iii) hollow fiber membrane, and iv) ultrafiltration membrane.

• Korea Trade Review
• /
• v.45 no.4
• /
• pp.107-123
• /
• 2020

The purpose of this paper is to analyze the Granger Causality relations between Korean FDI and exports in Vietnam using time-series from 2005 to 2019. Using 15-industry semi-annual data of Korean FDI and exports toward Vietnam, the Granger Causality Tests were conducted. Var and VEC models were decided after unit-root and cointegration tests of variables. Findings and implications of the empirical tests are as follows. First, unexpectedly FDI did not Grange-cause exports only in one direction. In two industries, food & beverage and medical & chemical products, there were Granger causality relations in both directions. In eight industries including print, publishig, pulp & paper, exports did Grange-cause FDI. In the rest of five industries including automative & trailer industry, there were no Granger Causality relation in both directions. Second, we presume that the both direction-causality relations are desirable phenomenon for Korea. Because Korean FDI and exports are increasing at the same time. On the other hand, substitution relationship between Korea's exports and FDI occur in the industry that exports did Grange-cause FDI. Finally, more in-depth researches considering Vietnam's consumer demand and the oriented characteristics of FDI are needed. The results of this research will contribute to understand structural patterns of FDI and exports in Vietnam and to make investment and export decisions.

• Nuclear Engineering and Technology
• /
• v.56 no.1
• /
• pp.222-232
• /
• 2024

New modular factory-built methodologies implemented in the construction and industrial plant industries may bring down costs for modular reactors. A factory-built environment brings about benefits such as; improved equipment, tools, quality, shift patterns, training, continuous improvement learning, environmental control, standardisation, parallel working, the use of commercial off shelf equipment and much of the commissioning can be completed before leaving the factory. All these benefits combine to reduce build schedules, increase certainty, reduce risk and make financing easier and cheaper.Currently, the construction and industrial chemical plant industries have implemented successful modular design and construction techniques. Therefore, the objectives of this paper are to understand and analyse the state of the art research in these industries through a systematic literature review. The research can then be assessed and applied to modular reactors.The literature review highlighted analysis methods that may prove to be useful. These include; modularisation decision tools, stakeholder analysis, schedule, supply chain, logistics, module design tools and construction site planning. Applicable research was highlighted for further work exploration for designers to assess, develop and efficiently design their modular reactors.

• Textile Coloration and Finishing
• /
• v.22 no.4
• /
• pp.300-305
• /
• 2010

Poly(ethylene terephthalate)(PET) tire cord has relatively lower adhesion properties caused by limited reacting sites. In order to improve the adhesion force between PET tire cord and rubber, an additional process to activate surface of PET has been employed. Atmospheric plasma was used to substitute the chemical finishing process of PET tire cord as a green dipping process. Contact angle was measured to confirm surface change of PET after plasma treatment. The treated PET tire cords with/without resorcinol-formaldehyde-latex(RFL) and unvulcanized rubber were vulcanized in a testing mold at $160^{\circ}C$. After atmospheric plasma treatment of PET tire cord, adhesion force was somewhat increased under some conditions.