• Knowledge Management Research
• /
• v.20 no.3
• /
• pp.49-71
• /
• 2019

This study explores the role of knowledge sharing between their social capital and performance in R&D setting. R&D environment is composed of experts from various domains with different backgrounds, such as technologies and experiences. Thus, increasing team social capital and enhancing knowledge sharing are critical for R&D performance. Social capital and Knowledge sharing are classified into two : Social capital and Knowledge sharing within/outside team. A empirical study was conducted at a research institute of large company that leads the advanced research and development of the domestic chemical industry. Data was collected 292 copies out of 500 copies (Response rate 58.4%). The result indicated that both social capital within and outside team had a positive effect on R&D Performance. Social capital within team had a significant impact on knowledge sharing within the team only, and social capital outside team had a significant effect on knowledge sharing outside the team only. Only knowledge sharing outside the team had a positive effect on R&D Performance and the mediating role of knowledge sharing was acquired for social capital outside team and R&D Performance only. From these key findings, this study suggests that, within the team, social capital alone can achieve results, but outside the team, it is necessary that not only social capital but also knowledge sharing are needed in order to achieve results.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.93-101
• /
• 2018

Various leading indicators of safety culture have been advocated for proactive actions as lagging indicators have limitations in reflecting the attitudes and behaviors due to their reactivity and low sensitivity. This study proposes a model of incident-reporting culture (IRC) and determines the influence of the components on incident-reporting rate (IRR) in order to develop proactive indicators of safety culture. A questionnaire survey was administered to 614 workers at a chemical company in Korea, and the internal psychological aspects were explored by using perceptions, attitude, and backgrounds. The relationship between these factors and IRR was quantitatively confirmed. The workers are more reluctant to report injury than property damage, the perception of severity is the most influencing factor, and most property damages are reported regardless of worker's willingness. These features should be prioritized when improving IRC, and the criteria of IRC need to be aligned with safety culture.

• Journal of Information Technology Services
• /
• v.17 no.4
• /
• pp.191-208
• /
• 2018

This study explores the role of knowledge sharing activities among team members and performance in R&D setting. Knowledge sharing activities are classified into two : Knowledge sharing activity within/outside team. And the relationships between the knowledge activities and R&D performance are also examined according to three R&D stages : basic, applied, and developmental research. A empirical study was conducted at a research institute of large company that leads the advanced research and development of the domestic chemical industry. Data was collected 292 copies out of 500 copies (Response rate 58.4%). The result indicated that knowledge sharing within and outside the team has a positive effect on R&D Performance. In particular, knowledge sharing within the team has a greater effect on R&D outcomes in basic research stage. Knowledge sharing outside the team has a greater effect on R&D outcomes in the development research stage. In the R&D organization, it is important that members of the team are well-connected and understanding each other, but they should encourage positive relationships with external members of the team. Depending on the R&D field of the team, the basic research field should concentrate more on knowledge sharing within the team, while the development research field should focus more on knowledge sharing outside the team.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.62-70
• /
• 2021

Representative systematic accident analysis methods proposed so far include AcciMap, STAMP, and FRAM. This study used these three techniques to analyze a fire accident case that occurred during routine manufacturing work in a domestic chemical plant and compared the results. The methods used different approaches to identify the cause of the accident, but they all highlighted similar causal factors. In addition to technical issues, the three accident analysis methods identified factors related to safety education, risk assessment, and the operation of the process safety management system, as well as management philosophy and company culture as problems. The AcciMap and STAMP models play complementary roles because they use hierarchical structures, while FRAM is more effective in analyses centered on human and organizational functions than in technical analyses.

• International Journal of Advanced Culture Technology
• /
• v.10 no.2
• /
• pp.307-313
• /
• 2022

Although telecommuting of SMEs has been activated due to the COVID-19 phenomenon, the security model for this is insufficient. Accordingly, the study was divided into threats centered on smartphones and threats centered on smartphone users. As a result of the study, one-third of SMEs are working from home. At this company with 100 employees, more than 50% of them work from home.and In the metal, machinery and chemical industries with factories, 20% of them work from home. As a result of analyzing the correlation between telecommuting according to the presence or absence of a factory, the correlation coefficient (r=-.385) has a clear linear relationship. And, as a result of the regression analysis, the R-squared value was 0.148, so companies with factories are highly related to telecommuting. In other words, we found that SMEs with factories do not want to work from home. In addition, as a result of analyzing the level of security threats, there were great concerns about theft, hacking, and phone taking during remote work. As limitations of the study, there were difficulties in selecting SMEs from the population in a non-face-to-face work environment, and there were limitations in the questionnaire items for deriving a non-face-to-face work environment.

• Structural Engineering and Mechanics
• /
• v.84 no.6
• /
• pp.733-741
• /
• 2022

The amount of natural gas that is used on a worldwide scale is continuously going up. Natural gas and acidic components, such as hydrogen sulfide and carbon dioxide, cause significant corrosion damage to transmission lines and equipment in various quantities. One of the fundamental processes in natural gas processing is the separation of acid gases, among which the safety and environmental needs due to the high toxicity of hydrogen sulfide and also to prevent wear and corrosion of pipelines and gas transmission and distribution equipment, the necessity of sulfide separation Hydrogen is more essential than carbon dioxide and other compounds. Given this problem's significance, this endeavor aims to extend the lifespan of the transmission lines' pipes for gas and oil. Zinc oxide nanoparticles made from the environmentally friendly source of Allium scabriscapum have been employed to accomplish this crucial purpose. This is a simple, safe and cheap synthesis method compared to other methods, especially chemical methods. The formation of zinc oxide nanoparticles was shown by forming an absorption peak at a wavelength of about 355 nm using a spectrophotometric device and an X-ray diffraction pattern. The size and morphology of synthesized nanoparticles were determined by scanning and transmission electron microscope, and the range of size changes of nanoparticles was determined by dynamic light scattering device.

• Proceedings of the Korean Society of Plant Pathology Conference
• /
• 2003.10a
• /
• pp.89.2-90
• /
• 2003

Potato late blight, caused by Phytophthora infestans, is one of the important diseases in potato cultivation areas. Though the incidence of late blight was depend on the inoculums and climatic condition In each fields, the foliar blight was reached to 100％ under the severe disease pressure condition in 2003. Outbreak of foliar blight was concentrated from May and July and evaluation of ten fungicides to control of late blight was made at Daekwallryoung area in potato fields. Based on the company recommendation, those fungicides were applied by a sprayer at the recommended rates on a weekly application schedule. Effect of ten fungicides on foliar blight was based on area under disease progress curve (AUDPC). Across all fungicides was reduced by 77％ in AUDPC and dimethomorph was reduced by 92％ in AUDPC during the same period, respectively. Those fungicide were inhibited the mycelial growth of isolate with different rate in chemical amended medium and several fungicides were completely limited the growth of isolate.

• Wind and Structures
• /
• v.37 no.2
• /
• pp.133-151
• /
• 2023

This paper first provides a wide overview about the design codes and standards covering the use of Computational Wind Engineering / Computational Fluid Dynamics (CWE/CFD) for wind-sensitive structures and built environment. Second, the paper sets out the basic assumptions and underlying concepts of the new Annex T "Simulations by Computational Fluid Dynamics (CFD/CWE)" of the revised version "Guide for the assessment of wind actions and effects on structures" issued by the Advisory Committee on Technical Recommendations for Constructions of the Italian National Research Council in February 2019 and drafted by the members of the Special Interest Group on Computational Wind Engineering of the Italian Association for Wind Engineering (ANIV-CWE). The same group is currently advising UNI CT021/SC1 in supporting the drafting of the new Annex K - "Derivation of design parameters from wind tunnel tests and numerical simulations" of the revised Eurocode 1: Actions on structures - Part 1-4: General actions - Wind actions. Finally, the paper outlines the subjects most open to development at the technical and applicative level.

• Asia Marketing Journal
• /
• v.16 no.1
• /
• pp.229-241
• /
• 2014

In 1997 the Asian Foreign Currency Crisis hit Korean shores. In its wake, Korean consumers demanded cost-saving solutions which will increase both the use-life and the fuel efficiency their vehicles. Bullsoneshot's effects include increases in gas mileage as well as cleaner cylinders, intakes and exhaust valves, the product was welcomed by an explosive demand from people driving older cars in an adverse economy. The history of Bullsone can be categorized as two major stages. The First stage is lunching era of "Bullone Shot" following competitor brand. The second stage is extension stage of brand and line based on Bullsone's positive brand equity. Mr. Hyun Woo Shin, formal CEO of OXY inc. and also formal vice president of OCI (Oriental Chemical Industries) take charge of New CEO of Bullsone. He energetically push the Bullsone's family brands and got a desirable results. He also setup ambitious goal : reach 100bn KRW in gross sales within 3 years. "Ripping itself free from 30~40 bn KRW sales range in which the company has stagnated in the last 10 years, Bullsone intends to be aggressive enough in marketing to reach 150 bn KRW in sales in 2013, and reach 700 bn KRW by 2018." This is the goal iterated by Bullsone's top executive team.

• Toxicological Research
• /
• v.18 no.1
• /
• pp.13-22
• /
• 2002

In Korea, 2,320 tonnes of acetanilide were mostly wed as intermediates for synthesis in phar-maceuticals or additives in synthesizing hydrogen peroxide, varnishes, polymers and rubber. Only small amount of 120 kg were wed as a stabilizer for hydrogen peroxide solution for hair colouring agents in 1998. Readily available environmental or human exposure data do not exist in Korea at the present time. However, potential human exposures from drinking water, food, ambient water and in work places are expected to be negligible because this chemical is produced in the closed system in only one company in Korea and the processing factory is equipped with local ventilation and air filtering system. Acetanilide could be distributed mainly to water based on EQC model. This substance is readily biodegradable and its bioaccumulation is low. Acute toxicity of acetanilide is low since the L $D_{50}$ of oral exposure in rats is 1,959 mg/kg bw. The chemical is not irritating to skin, but slightly irritating to the eyes of rabbits. horn repeated dose toxicity, the adverse effects in rats were red pulp hyperplasia of spleen, bone marrow hyperplasia of femur and decreased hemoglobin, hematocrit and mean corpuscular hemoglobin concentration. The LOAEL for repeated dose toxicity in rats was 22 mg/kg/day for both sexes. Acetanilide is not considered to be genotoxic. In a reproductive/developmental toxicity study, no treatment-related changes in precoital time and rate of copulation, impregnation, pregnancy were shown in all treated groups. The NOAELs for reproduction and developmental toxicity (off-spring toxicity) are considered to be 200 mg/kg bw/day and 67 mg/kg bw/day, respectively. Ecotoxicity data has been generated in a limited number of aquatic species of algae (72 hr- $E_{b}$ $C_{50}$; 13.5 mg/l), daphnid (48hr-E $C_{50}$ > 100 mg/l) and fish (Oryzias latipes, 96hr-L $C_{50}$; 100 mg/l). Form the acute toxicity values, the predicted no effect concentration (PNEC) of 0.135 mg/1 was derived win an assessment factor of 100. On the basis of these data, acetanilide was suggested as currently of low priority for further post-SIDS work in OECD.in OECD.D.