• KSBB Journal
• /
• v.31 no.2
• /
• pp.91-99
• /
• 2016

Tea is an aqueous infusion of dried leaves of the plant Camellia sinensis L. and is the second most widely consumed beverage around the world after water. Aroma compounds of tea differ largely depending on the manufacturing process, even from the same categories of different origins. The flavor of tea can be divided into two categories: taste (non-volatile compounds) and aroma (volatile compounds). In the present study, we review the formation mechanism of main aromas generated from carotenoids, lipids, glycosides as precursors, and Maillard reaction during the tea manufacturing process, with biological and chemical mechanisms.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.74-74
• /
• 2017

화학물질관리법 시행에 따른 도금기업의 준비 현황 및 실태를 조사하기 위하여 중간보고서에서는 대부분의 업체에서 가장 부담스럽다고 느낀 '유해화학물질 취급시설 배치 설치 관리 기준' 중 실질적으로 가장 어려움을 호소하는 내용부터 설문조사를 실시하여 정리하였고, 최종보고서에서는 한국경영자총협회에서 제안한 "화관법 개선 산업계 의견"을 참고하여 도금업체의 현장과 관련된 부분을 선정하여 실태조사를 실시하였다. 장외영향평가서 및 위해관리계획서 부문의 경우 도금공장의 시설 결함 및 노후화로 인하여 화학사고가 발생할 가능성이 있더라도 대부분의 현장이 화관법 기준을 충족하기 이전에 시설 허가를 받을 때 건축법이나 소방법 등 여러 규제사항을 통과하여 인 허가를 받은 사업장이고 또한 정기검사를 실시함으로써 안전에 대해서는 일차적으로 보장을 받은 상태라고 볼 수 있다. 실제로 설문조사에서 화학사고를 경험과 관련하여 94% 이상이 "없다"라고 응답하였으므로 약품에 의한 화학사고의 개연성은 거의 없는 것으로 나타났다.

• Journal of Welding and Joining
• /
• v.11 no.1
• /
• pp.21-32
• /
• 1993

A cracking failure of a austenitic stainless steel elbow in a naphtha cracking line in a petrochenmical plant occurred, resulting in leakage of organic compound flowing inside the elbow. Due to the failure, emergency shutdown of the plant was enforced to repair the troubled part of the line. The repair cost as well as production loss during the unscheduled plant shutdown has cost the company a great amount of financial loss. In this studies, a failure analysis of the cracked elbow was performed using NDT, chemical analysis, microstructural analysis including optical microscopy as well as scanning electron microscopy with EPMA, mechanical testings such as tensile testing, hardness testing and Charphy impact test fractography. The results indicated that several problems such as a welding defect and presence of a detrimental phase which was found to be relate to improper postforming heat treatment process was identified and the failure was concluded to be due to a low temperature embrittlement of the defect-containing elbows.

• Journal of Life Science
• /
• v.19 no.1
• /
• pp.147-151
• /
• 2009

D-pinitol, another chemical structure of 3-O-methyl-D-chiro-inositol, is an important insulin-sensitizer. The purpose of this review is to examine the characteristics of pinitol and other analogs as functional food biomaterials which were well known to reduce blood glucose levels. Pinitol can be converted to chiro-inositol in normal humans, while diabetic patients can not use the molecule, resulting in exhibiting low level of chiro-inositol in their urine. Recently, it is reported that pinitol can trigger phospholipase C/D, thus the rate of glucose metabolism accelerates to use as fuel for human body. To not only reduce insulin resistance of diabetic patients, but also alleviate the symptoms of diabetes, obesity, and muscle contraction, pinitol and its dietary supplementation is needed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.218-218
• /
• 2011

The CIGS Solar Cells have the highest conversion efficiency in the film-type solar cells. They consist of p-type CuInSe2 film and n-type ZnO film. The CdS films are used as buffer layer in the CIGS solar cells since remarkable difference in the lattice constant and energy band gap of two films. The CdS films are toxic and make harmful circumstances. The CdS films deposition process need wet process. In this works, we design and make the hitter and lamp reflection part in the sputtering system for the ZnS films deposition as buffer layer, not using wet process. Film thickness, SEM, and AFM are measured for the uniformity valuation of the ZnS films. We conclude the optimum deposition temperature for the films uniformity less than 1.6%. The ZnS films deposited by the sputtering system are more dense and uniform than the CdS films deposited by the Chemical Bath Deposition Method(CBD) for the CIGS Solar Cells.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.3 no.1
• /
• pp.59-62
• /
• 2003

The death from suffocation due to the gas from various disaster is frequent very and it occurs. Specially only from the company which treats the gas and only the enterprise which maintains the gas the many greeting accident occurs. Also accidents could occur when working around the toxic gas without one's noticing Therefore a development of the portable gas ditectoror is very essential. Specially with development of design and the new product of the electric chemical sensor might help reducing the many accidents. From the side which protects a worker's life, it isn't just simple equipment but also it must be connected directly to life saving is very important. Therefore, the key technical contents of development must be focused on sensor which is simple and easy to carry and able to detect varieties of toxic gas. So, this study is about the product design which is simple and easy to carry and to use.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.1134-1135
• /
• 2006

A revolutionary "Active Braze Coated Diamond" (ABCD) has been developed for bonding diamond grits firmly in the metal matrix. The molten braze is wetted and reacted with diamond to form strong chemical bond at the interface so that the diamond does not become knocked out of tools. The ABC is a nickel alloy that can form metallurgical diffusion bondswith the metal matrix. In essence, ABCD turns diamond into a metal grain so that the diamond tools can be made by conventional powder metallurgical process without being concerned about the poor bonding between matrix metal powder and the diamond as before.

• KCI Concrete Journal
• /
• v.14 no.2
• /
• pp.81-85
• /
• 2002

The strength development of concrete is influenced by temperature and cement type which greatly affect hydration degree of cement. There is not pertinent concrete strength management method in korea. There are several methods for estimating the in-place strength of concrete. One such method is the maturity concept. The maturity concept is based on the fact that concrete gains strength gradually as a result of chemical reactions between cement and water; and for a specific concrete mixture, strength at any age and at normal conditions is related to the degree of hydration. The rate of hydration and, therefore, strength development of a given concrete will be a function of its temperature. Thus, strength of concrete depends on its time-temperature history. The goals of the present study are to investigate a relationship between strength of high-strength concrete and maturity that is expressed as a function of an integral of the curing period and temperature and predict strength of concrete.

• Industrial Engineering and Management Systems
• /
• v.14 no.4
• /
• pp.401-412
• /
• 2015

In this paper, we present a modeling approach to production planning for an actual production line and a heuristic method. We also illustrate the successful implementation of the proposed method on the production line. A heuristic algorithm called the push-back algorithm was designed for a single machine earliness/tardiness production planning with distinct due date. It was developed by combining a minimum slack time rule and shortest processing time rule with a push-back procedure. The results of a numerical experiment on the heuristic's performance are presented in comparison with the results of IBM ILOG CPLEX. The proposed algorithm was applied to an actual case of production planning at Woongjin Chemical, a leading manufacturer of filter products in South Korea. The seven-month execution of our algorithm led to a 24.5% decrease in the company's inventory level, thus demonstrating its practicality and effectiveness.

• Journal of the Korea Safety Management & Science
• /
• v.4 no.3
• /
• pp.1-11
• /
• 2002

It has been Management for stabilize Enterprise-Management for Economic demand for to Productivity, Automation, customer satisfaction, Especially Semiconductor-Industry has been, potential-risk in working to factory to machine equipment, all kinds of utility, gas, chemical, electronic, Fire. This study of basic-purpose has Research Different From as Follow to analysis and Solution For semiconductor product Factory of a actual point Data and specific-gravity to Relation for company-Injury. 1. It has been try to Injury-Tendency and cause-Analysis for our County-Manufacture-Occupation. 2, Semiconductor Injury of Actual-condition in Enforcement for problem and Analysis that Injury Problem has occupated it Submitted to Solution for ordinary Injury theory View to point Solve at for New Model has applicated to that nilem for processed to Solution.