• 제목/요약/키워드: Chelate

검색결과 361건 처리시간 0.036초

Cu(II)-Lactic Acid와 Cu(II)-LMWS-Chitosan 착물의 DFP 가수분해반응 연구 (Hydrolysis of DFP Using Cu(II)-Lactic Acid and Cu(II)-LMWS-Chitosan Chelates)

  • 계영식;정근홍;김동욱
    • 공업화학
    • /
    • 제31권5호
    • /
    • pp.475-480
    • /
    • 2020
  • Lactic acid와 키토산을 Cu(II) 이온과 반응시켜 합성한 착물을 사용하여 유기인 유사 독성물질인 DFP (Diisopropyl fluorophosphate) 분해반응에 적용하였다. Cu(II)-lactic acid 착물의 경우 homogeneous 상태에서 분해반응 반감기가 37. 1 min으로 분해성능이 우수하였다. 1 kDa 저분자량 수용성 키토산으로 합성한 Cu(II)-LMWS chitosan 착물은 결정화 후에는 용해도가 낮아 heterogeneous 한 상태에서 분해반응이 진행되었으며 그 반감기는 32.9 h이었다. 이 결과는 기존에 연구된 18 kDa 키토산 Cu(II)착물의 분해반응속도보다 약 16배 정도 증가된 것이다. Cu(II)-LMWS chitosan 착물을 결정화하지 않고 homogeneous한 상태로 진행한 분해반응에서는 반감기가 8.75 h로 용해도에 따라 약 4배의 차이를 확인할 수 있었다.

8-HQR 및 8-HQRS 킬레이트 수지의 합성과 그의 이온교환 성질 (Synthesis of 8-HQR and 8-HQRS Chelate Resins and It's Ion Exchange Properties)

  • 김동원;김공수;김홍수
    • 대한화학회지
    • /
    • 제30권1호
    • /
    • pp.69-75
    • /
    • 1986
  • 8-히드록시퀴놀린, 또는 8-히드록시퀴놀린-살리실산을 모체로 하고, 레졸신을 가교제로 하여 그것들을 포름알데히드와 축중합시켜, 8-히드록퀴놀린-레졸신(8-HQR) 및 8-히드록시퀴놀린-레졸신-살리실산(8-HQRS)킬레이트 수지를 합성하였다. 8-HQR 및 8-HQRS수지의 이온교환용량은 각각 4.1 meq/g 및 5.4 meq/g이었다. 이들 수지에 대한, Fe(III), Cu(II), Pb(II), Co(II) 및 Ni(II)금속이온들의 흡착과 분포계수에 대하여 논의하였다. 이들 킬레이트 수지들에 대한 금속이온들의 흡착은, pH=7에서 가장 크게 나타났다. 그리고 이들 금속이온들의 분포계수는, 염산의 농도가 감소함에 따라 증가하였다.

  • PDF

킬레이트 착화학반응에 의한 음식물폐기물 혐기소화가스 중 황화수소의 제거와 황회수 및 경제성평가 (Reuse of Hydrogen Sulfide by Ferric Chelate Reaction of Food Waste Anaerobic Digestion Gas, Sulfur Recovery and its Economic Evaluation)

  • 박영규;양영선
    • 청정기술
    • /
    • 제20권4호
    • /
    • pp.367-374
    • /
    • 2014
  • 0.1~1 M의 철킬레이트 화합물을 이용한 화학흡수반응에 의한 바이오가스내 황화수소제거를 위한 실험이 수행되었다. 철킬레이트 화합물을 이용한 황화수소제거는 철킬레이트의 최적산화반응을 통해 이루어진다. 바이오가스에 존재하는 황화수소는 킬레이트농도 및 pH 등의 공정조건에 따라 효과적으로 제거될 뿐만 아니라 철킬레이트 산화반응에 의해 황화수소내 존재하는 황성분을 생성시킨다. Fe-EDTA의 농도가 증가하면 철킬레이트 화합물의 착물이 안정되어 황생성의 전환이 증가하였다. 또한 철킬레이트화합물의 안정도는 pH에 따라 변하는 중요한 인자이고 pH 9에서 최적반응을 나타냈다.

연구논문 초록(1967~1978)

  • 한국표면공학회
    • 한국표면공학회지
    • /
    • 제16권4호
    • /
    • pp.199-214
    • /
    • 1983
  • Up to this date, numerous methods of analysis of electroplating solutions are published. Some, however, need lots of works before reaching final results, or require high technique and special instruments, and also some are unaccurate due to unclearnes of end point. Like our undevelope countries, technicians of electoplating shops are most high school gradutes or under, and have not much knowledge on chemistry. Furthermore, those technicians have to control their plating solutions by themselves without having enough analytical laboratory equiIJment. Therefore, in this paper the simplest, besides accurate method is investigated after comparing nu.merous methods published. Among the methods of 'copper determinations from acid and alkaline copper plating baths, EDT A titration method are chosen, due to these methods are the simplest and fastest for the evaluation of metal content, without requiring any special instrument. For acid copper solutions, chelate titrations were accurate enough. Since the end point of titration of chelate method is variable according to the kind of .indicators androther metal's coexsistence as well as solution comIJonent, many difficulties were encountered from cyanide' copper, on the contrary of acid copper bath. PAN, PV, and MX indicators were tried, but it is found that MX is the best. In cyanide solution, due to cyanide is the masking reagent, elimination of this component is essential, and finally found that elimination eN- by precipitation with AgN03 solution was the simplest and the most accurate way among others. This method was very accurate for the new plating solutions even coexistence with organic brightners. However used solutions for long months running have to be predetermined the accurate copper value by thiosulfate method from time to time, before chelate titration by means of AgN03 precipitation. Always some constant deviatioJ;ls will be seen according to the solutions nature. Therefore those deviation values have to be compensated each time.

  • PDF

Comparison of the effects of zinc oxide and zinc aspartic acid chelate on the performance of weaning pigs

  • Sarbani Biswas;De Xin Dang;In Ho Kim
    • Journal of Animal Science and Technology
    • /
    • 제66권1호
    • /
    • pp.125-134
    • /
    • 2024
  • In this research, the growth efficiency, nutritional utilization, fecal microbial levels, and fecal score of weaned pigs were evaluated using therapeutic zinc oxide (ZnO) and zinc aspartic acid chelate (Zn-Asp). In a 42-day feeding trial, 60 weaned pigs ([Yorkshire × Landrace] × Duroc) were arbitrarily allotted (age: 21 days; 7.01 ± 0.65 kg preliminary body weight) to 3 different treatment groups with 5 repetitions (2 male and 2 female piglets) in each pen. The trial had 2 different phases, including 1-21 days as phase 1, and 22-42 days as phase 2. The nutritional treatments were: basal diet as control (CON), basal diet incorporated with 3,000 ppm ZnO as TRT1, and basal diet incorporated with 750 ppm Zn-Asp as TRT2. In comparison to the CON group, the pigs in the TRT1 and TRT2 groups had greater (p < 0.05) body weight on day 42; an average daily gain, and an average daily feed intake on days 22-42. Furthermore, during days 1-42, the average daily gain in the treatment groups trended higher (p < 0.05) than in the CON group. Additionally, the fecal score decreased (p < 0.05) at week 6, the lactic acid bacteria count tended to increase (p < 0.05), and coliform bacteria presented a trend in reduction (p < 0.05) in the TRT1 and TRT2 groups compared to the CON group. However, there was no difference in nutrient utilization (p > 0.05) among the dietary treatments. Briefly, the therapeutic ZnO and Zn-Asp nutritional approaches could decrease fecal score and coliform bacteria, increase lactic acid bacteria, and improve growth efficiency; moreover, Zn-Asp (750 ppm) can perform a comparable role to therapeutic ZnO (3,000 ppm). So we can use Zn-Asp (750 ppm) instead of therapeutic ZnO (3,000 ppm) for the better performance of weaning pigs and the reduction of environmental pollution, as therapeutic ZnO is responsible for environmental pollution.

사료내 Cu-methionine Chelate와 Cu-soy Proteinate가 산란계의 생산성, 소장내 미생물 균총 및 면역체계에 미치는 영향 (Effect of Dietary Supplementation of Cu-methionine Chelate and Cu-soy Proteinate on the Performance, Small Intestinal Microflora and Immune Response in Laying Hens)

  • 백인기;김찬호;박광월
    • 한국가금학회지
    • /
    • 제35권3호
    • /
    • pp.303-311
    • /
    • 2008
  • 본 실험은 Cu-methionine chelate(Cu-Met)와 Cu-soy proteinate(Cu-SP)가 산란계의 생산성과 소장내 미생물 균총 및 면역 체계에 미치는 영향을 조사하기 위해 실시하였다. 사양시험은 39주령의 산란계(Hy-line $Brown^{(R)}$) 960수를 선별하여 A형 2단 4열 케이지에 대조구 포함 총 6처리구로 구성하여 처리당 4반복, 반복당 40수씩(2수 수용 케이지 20개) 난괴법으로 임의 배치하였다. 시험 기간 동안 물과 사료는 자유 섭취하게 하였으며, 일반적인 점등 관리(자연 일조+조명; 16 hr)를 실시하였다. 시험구는 대조구, 항생제구(avilamycin 6 ppm), Cu- Met 50(Cu-methionine으로 Cu 50 ppm), Cu-Met 100(Cu- methionine으로 Cu 100 ppm), Cu-SP 50(Cu-soy proteinate로 Cu 50 ppm) 그리고 Cu-SP 100(Cu-soy proteinate로 Cu 100 ppm) 등 총 6처리였다. 일계 산란율(Hen-day egg production)과 산란지수(Hen-house egg production)는 Cu 첨가구들과 항생제 첨가구들이 대조구에 비해 높은 경향을 보였는데, 특히 Cu-Met 100 구는 대조구에 비하여 유의적으로(P<0.05) 높았으며 Cu 처리구들 간에 종류나 첨가 수준에 따른 차이는 유의하지 않았다. 난중에서는 항생제구와 Cu-SP 첨가구들이 대조구보다 무거운 경향을 보였고, Cu-Met 첨가구들보다는 유의하게(P<0.05) 무거웠다. 난각 강도, 난각 두께, 난각색, 난황색, Haugh unit 등 계란 품질에 있어서 처리구간에 유의적인 차이는 나타나지 않았다. Leukocytes와 erythrocytes 관련 모수들은 평균 적혈구 혈색소량(MCH)을 제외한 모든 항목에서 처리간에 유의적인 차이는 나타나지 않았다. MCH는 Cu-SP 100이 대조구와 비교하여 유의적으로 높았다(P<0.05). 혈청 IgG와 IgA의 농도는 처리구간에 유의적인 차이는 나타나지 않았다. 간 내 구리의 함량은 처리간에 유의한(P<0.05) 차이가 있었는데, 구리의 첨가 수준이 높을수록 높아지는 경향이 있었으며 같은 첨가 수준에서는 Cu-SP 첨가구들이 Cu-Met 첨가구들보다 높은 경향이 있었다. 소장 내용물 중 Cl. perfringens의 수는 항생제와 Cu 첨가구들이 대조구에 비해 적었고 E. coli 수는 첨가구들에서 감소하는 경향이 있었으며, Lactobacilli 수는 Cu 첨가구들이 대조구나 항생제구와 비교하였을 때 많았다. 결론적으로 Cu-Met와 Cu-SP는 산란계의 산란율 개선에 있어서 항생제와 유사한 효과를 나타내었다. Cu-SP는 Cu-Met보다 난중을 유의하게 증가시켰으나 다른 항목들에 있어서는 Cu 공급원(Cu-Met vs Cu-SP)과 첨가수준(50 vs 100 ppm)에 따른 유의적 차이는 없었다.