• Korean journal of food and cookery science
• /
• v.9 no.2
• /
• pp.109-115
• /
• 1993

This study was attempted to investigate the current status of industry food service management in Chonbuk province. The survey for the analysis was conducted through the questionaires to dietitian. The following results are to be noted. 1. Only one dietitian was employed regardless of feeding numbers and feeding times, and the average number of cooks comes to 5∼6 persons. Among 51 food service places for the study, 84.3% provided more than two meals a day. Feeding number were 200∼1000 people per one meal (64.7%) and feeding cost amounts to 700∼1000 won per meal per one person. 2. The food preferences and budget were primary considerations in menu planning. The type of menus was a non-selective menu with a seven-day cycle (83.7%). Most of dietitian (94.1%) had control of food purchasing, receiving and checking procedure and prefered placing orders by phone (94.5%) through the purveyors (86.4%). 3. In many food service places (70.5%), the mass food preparation was controlled of cooking method and standardized recipes were not undertaken by management Also, the food quality control such as flavor, texture, appearance and temperature was not fully established in food service system. 4. They used the method of manual dish washing operations (88%) and about 71.4% of them are dependent on boiling method of ultrabiolet light for disinfection of kitchen utensils. 5. The performance rates of dietitian management responsibility showed as nutritional management 100%, working management 72.4%, sanitary management 85.6%, personnel management 64.5% and nutrition education 40.7%, but they did not perform the objective and systematic their own responsibility as specialized dietitian because only few dietitian used basic check list and management tools. In addition, dietitian (21.6%) worked beyond their field. In the result, only 54.9% dietitian have satisfied their own occupation and most of them emphasized on practical working in educational curriculums.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.22 no.4
• /
• pp.42-51
• /
• 2018

Verticality problem during the installation process in offshore wind turbine substructures could degrade the safety of the whole structures. Therefore, in this paper, the design of vertically adjustable transition piece(T.P.), using a PS anchor and grout of anchor socket in concrete gravity based substructure(G.B.S.), was proposed. T.P. was designed for 5MW offshore wind trubine and can adjust up to $0.5^{\circ}$ in verticality, occurred during installation. The design plan for each members and design procedure for T.P. was proposed. Then based on the proposed design, actual design targeting sea of Jeju-island was carried out. Finally, by use of non-linear 3D Finite Element Analysis(F.E.A.), evaluation of design was performed. As a result of evaluation, by checking load transfer mechanism and stress of T.P, proposed design was considered safe up to $0.5^{\circ}$ of adjustment.

• The Korean Journal of Pain
• /
• v.30 no.2
• /
• pp.104-115
• /
• 2017

Background: C-arm fluoroscopy equipment is important for interventional pain management and can cause radiation injury to physicians and patients. We compared radiation safety education and efforts to reduce the radiation exposure of pain specialists. Methods: A survey of 49 pain specialists was conducted anonymously in 2016. The questionnaire had 16 questions. That questionnaire was about radiation safety knowledge and efforts to reduce exposure. We investigated the correlation between radiation safety education and efforts of radiation protection. We compared the results from 2016 and a published survey from 2011. Results: According to the 2016 survey, all respondents used C-arm fluoroscopy in pain interventions. Nineteen respondents (39%) had received radiation safety education. Physicians had insufficient knowledge about radiation safety. When the radiation safety education group and the non-education group are compared, there was no significant difference in efforts to reduce radiation exposure and radiation safety knowledge. When the 2011 and 2016 surveys were compared, the use of low dose mode (P = 0.000) and pulsed mode had increased significantly (P = 0.001). The number checking for damage to radiation protective garments (P = 0.000) and use of the dosimeter had also increased significantly (P = 0.009). But there was no significant difference in other efforts to reduce radiation exposure. Conclusions: Pain physicians seem to lack knowledge of radiation safety and the number of physicians receiving radiation safety education is low. According to this study, education does not lead to practice. Therefore, pain physicians should receive regular radiation safety education and the education should be mandatory.

• The Journal of the Korea Contents Association
• /
• v.6 no.11
• /
• pp.217-224
• /
• 2006

As the online game which is possible of large-scale multiple access enjoys popularity, the number of development by many online game manufacturers came to increase exponentially. But, the reason why the qualitative expansion pace cannot follow the pace of the quantitative expansion on games is that most of them are paltry enterprises except the leading enterprises which are occupying few competitive advantages, so there is no well-established production procedure, and accurate test before the launch isn't accompanied. Therefore, it doesn't cope flexibly to the expectable results. Now, important function is not embodied through the game feature checking stage of the same feature or is under the situation being used in finding out the fatal error of the specific parts. To this, this study collects the emotional vocabulary in the games to suggest the evaluation system that can evaluate the emotion the user feels while playing the game with the usage of the evaluation system that is leaned toward the existing usage evaluation system, and through factor analysis, we classify them into interactivity, interface and information factors and suggest the emotion evaluation system while designing the evaluation questions according to it.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.13 no.1
• /
• pp.37-43
• /
• 1991

Cephalometric prediction tracing is the preoperative double checking procedure which can predict bony and soft tissue change. Soft tissue profile prediction is routinely performed according to the known ratios of the soft to hard tissue movement which can vary considerably in each individual. Besides interindividual variation of the ratios of the soft to hard tissue change, actual results of the postoperative soft tissue profile can reflect other important modifying factors if it is compared with prediction tracing used. The purpose of this study is to compare soft tissue prediction tracing used with postoperative tracing and to find intervening modifying factor via serial tracing. Review of 30 prediction tracing showed that the most important factor contributing to prodiction tracing inaccuracy was the skeletal and dental relapse. And, some factors which may be responsible for prediction tracing inaccuracy were discussed.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.12
• /
• pp.2834-2851
• /
• 1997

In this paper, a design and implementation of VHDL compiler front-end, aims at supporting the full-set of VHDL '87 & '93 LRM and carring out the preprocessing of VHDL-to-C, is described. The VHDL compiler front-end includes 1)the symbol tree of analyzed data to represent the hierarchy, the scope and visibility, the overloading and homograph, the concurrent multiple stacks in VHDL, 2)the data structure and supportig routies to deal with the objects, the type and subtype, the attribute and operation in VHDL, 3)the analysis of the concurrent/sequential statements, the behavior/structural descriptions, of semantic token and the propagation of symbol & type to improve the registration and retrieval procedure of analyzed data. In the experiments with Validation Suite, the VHDL compiler front-end could support the full-set specification of VHDL LRM '87 & '93; and in the experiments to asses the performance of symantic token for the VHDL hierachy/visibility/concurrency/semantic checking, the improvement of about 20-30% could be achieved.

• The KIPS Transactions:PartC
• /
• v.15C no.1
• /
• pp.9-18
• /
• 2008

Prevention of attacks being made through program modification in sensor nodes is one of the important security issues. The software-based attestation technology that verifies the running code by checking whether it is modified or not in sensor nodes is being used to solve the attack problem. However, the current software-based attestation techniques are not appropriate in sensor networks because not only they are targeting static networks that member nodes does not move, but also they lacks consideration on the environment that the trusted verifier may not exist. This paper proposes a mutual attestation protocol that is suitable for sensor networks by using SWATT(Software-based ATTestation) technique. In the proposed protocol, sensor nodes periodically notify its membership to neighbor nodes and carry out mutual attestation procedure with neighbor nodes by using SWATT technique. With the proposed protocol, verification device detects the sensor nodes compromised by malicious attacks in the sensor network environments without trusted verifier and the sensor networks can be composed of only the verified nodes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.11
• /
• pp.495-502
• /
• 2013

In this paper, we present an anonymous authentication and location assurance protocol for secure location-aware services over vehicular ad hoc networks (VANETs). In other to achieve our goal, we propose the notion of a location-aware signing key so as to strongly bind geographic location information to cryptographic function while providing conditional privacy preservation which is a desirable property for secure vehicular communications. Furthermore, the proposed protocol provides an efficient procedure based on hash chain technique for revocation checking to effectively alleviate communication and computational costs on vehicles in VANETs. Finally, we demonstrate comprehensive analysis to confirm the fulfillment of the security objectives, and the efficiency and effectiveness of the proposed protocol.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4223-4238
• /
• 2011

The advantages of grouting are the simple instrument, the simple procedure of practice and the simple verification of grouting result. but the more grouting practice there is, the more damages of environment from grouting practice and grouting materials there are. so, the grouting materials and methods with the character of environment friendly are introduced in construction field, recently. This paper is to study of the physical characteristics that has thixotropic character and that consists of inorganic and polycarboxylate co-polymer. In study, various testing methods are performed such as a viscosity, a thixotropy, a compressive strength, a heavy metal detection and pH measurement in lab test and a low pressure injection test and a high pressure injection test in field with different soil type. As a result, a optimum mix ratio is proposed by analyzing the result of lab test. the field applicability is verified by checking a injection pressure, a grout volume and a hardened body of grout by excavating the practice site.

• Geophysics and Geophysical Exploration
• /
• v.8 no.1
• /
• pp.112-117
• /
• 2005

Geophysical logging is routinely undertaken as part of most coal mine exploration programs. Currently, the main application for the logs is to determine coal seam depth and to qualitatively estimate coal quality, lithology, and rock strength. However, further information can be obtained, if quantitative log interpretation is made. To assist in the uptake of quantitative interpretation, we discuss log responses in terms of the mineralogy of the clastic sedimentary rocks frequently found in the Australian black coal mining areas of the Sydney and Bowen Basins. We find that the log responses can be tied to the mineralogy with reasonable confidence. Ambiguities in the interpretation will be better resolved if a full suite of logs is run. A method for checking for internal consistency, by comparing calculated and observed velocities, is also described. A key driver for quantitative interpretation is geotechnical characterisation. We propose a classification system for clastic rocks that takes into consideration physical rock properties that can be inferred from geophysical logs.