• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 1999.10c
• /
• pp.365-370
• /
• 1999

The revision of domestic laws is in progress according to the UN Convention on the Law of the Coastal Zone Management . Along with it, the governmental policies related to maritime environmental preservation, especially around coastal zones and public works have been promoted based on enviornment, swiftly changed from the old function-based style. Therefore, this report will point out the important aspects which should be considered whenever there is any project on the coastal zones, suggest and classify projects of reviving the nationwide coastal zones, and show how to planning , check and evaluate the necessary technologies for reviving the coastal zones. This research will track down the coastal zone management method based on the natural enviornment as one of the necessary process to check the coastal zone enviornment for effective operating of the coastal zone management equipment method, starting on August 9, 1999, and report the technologies related with it.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.268-271
• /
• 2018

Smart Airport which applies the new ICT technologies to the airport is a future airport to provide convenient and safe services for passengers who are airport users, and promote the efficient management of the airport system in point of airport operator's view. The ranges of smart airport include the overall area of the airport like land side, terminal, and air side. In this paper, we propose a technical solution for airport process of terminal providing passenger convenience in various ranges for smart airport realization. Self-service such as web or mobile check-in, self check-in/tagging/back drop/boarding etc. should be strengthened to smartize the airport process and technologies such as automatic immigration, smart security search and automatic AI-based baggage search should be applied. In this paper, we explain the concept of smart airport and smart process, and then propose technical considerations.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.10a
• /
• pp.364-367
• /
• 2007

In nano-imprint lithography (NIL) process, which has shown to be a good method to fabricate polymeric patterns, several kinds of pattern defects due to thermal effects during polymer flow and mold release operation have been reported. A typical defect in NIL process with high aspect ratio and low resist thickness pattern is a resist fracture during the mold release operation. It seems due to interfacial adhesion between polymer and mold. However, in the present investigation, FEM simulation of NIL molding process was carried out to predict the defects of the polymer pattern and to optimize the process by FEA. The embossing operation in NIL process was investigated in detail by FEM. From the analytical results, it was found that the lateral flow of polymer resin and the applied pressure in the embossing operation induce the weld line and the drastic lateral strain at the edge of pattern. It was also shown that the low polymer-thickness result in the delamination of polymer from the substrate. It seems that the above phenomena cause the defects of the final polymer pattern. To reduce the defect, it is important to check the initial resin thickness.

• Journal of the korean Society of Automotive Engineers
• /
• v.15 no.2
• /
• pp.130-143
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper, experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system using WA stick type honing stone is proposed. Representative Engineering ceramics, such as AI$_{2}$O$_{3}$, Si$_{3}$N$_{4}$, are ground with diamond wheel. Also bending strength test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding machining method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficiency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• Journal of the Korean Society for Precision Engineering
• /
• v.10 no.2
• /
• pp.178-189
• /
• 1993

Engineering ceramics have some excellent properties as the material for the mechanical components. It is, however, very difficult to grind ceramics with high efficiency because of their high strength, hardness and brittleness. In this paper experiments are carried out to obtain the effect of "In-process dressing" to grind the Engineering ceramics with high efficiency. To save running time for dressing process and obtain restraint effect of diamond grain wear, "In-process dressing" system usint WA stick type honing stone is proposed. Representative High Strength Engineering ceramics A1$_{2}$O$_{3}$ and Si$_{3}$N$_{4}$are ground with diamond wheel. Also bending strengrh test is carried out to check upward tendancy of mecahnical properties as the result of machining defact restraint through the grinding maching method using "In-process dressing" process. Some results obtained in this study provide useful information to attain the high efficency grinding and the high mechanical properties of Engineering ceramics.rties of Engineering ceramics.

• The Korean Journal of Archival Studies
• /
• no.14
• /
• pp.91-117
• /
• 2006

Electronic Records need to be appraised the authenticity as well as the value itself. There has been various kinds of discussion about how records to be appraised the value of themselves, but there's little argument about how electronic records to be appraised the authenticity of themselves. Therefore this article is modeling some specific authenticity appraisal methods and showing each stages those methods should or may be applied. At the Ingest stage, integrity verification right after records creation in the organization which produced the records, quality and integrity verification about the transferred in the organization which received the records and integrity check between SIP and AIP in the organization which received and preserved the records are essential. At the Preservation stage, integrity check between same AIPs stored in different medium separately and validation of records where or not damaged and recovery damaged records are needed. At the various Processing stages, suitability evaluation after changing the record's management control meta data and changing the record's classification, integrity check after records migration and periodical validation and integrity verification about DIPs are required. For those activities, the appraisal methods including integrity verification, content consistency check, suitability evaluation about record's meta data, feasibility check of unauthorized update and physical status validation should be applied to the electronic records management process.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.2 s.179
• /
• pp.65-72
• /
• 2006

Downcoiler is one of the major facilities in hot strip mill operation. The key to good coiling is having good equipment, modem control systems, excellent maintenance and an understanding of coiling process. Therefore, this study aims to develop a program that is useful for calculating machine design parameters and simulating coiling process. In this study, the pinching and coiling mechanism of the downcoiler was thoroughly studied and some of operational factors and their effects on the coiling process were investigated. The software was developed to estimate engineering parameters for coiler component design and to determine optimal setting values for successful coiling operation. In order to check the accuracy and usefulness of the developed software, the simulation of the downcoiler in $\#2$ Hot Strip Mill in Pohang Works was performed. The simulation results suggested that the set-up value for unit tension could be lowered. Test coiling operation by using the lowered set-up value for unit tension resulted in much more successful coiling in the aspect of strip quality and power consumption.

• Korean Journal of Computational Design and Engineering
• /
• v.2 no.4
• /
• pp.267-275
• /
• 1997

A ship-block cutting module is being developed as part of a computational system for a ship design. The module supports product-information to other modules in design process and displays ship-blocks in cutting-operation. Welding-information is essential to process-planning and scheduling. In the module, ship-blocks are modeled by Plate-Objects and then divided into several cutting pieces. The module automatically creates Welding-Objects containing welding-information in the process. Since the module is connected to WWW(World Wide Web), users in various platforms can access the models simultaneously In addition, users can check manufacturing constraints by inspecting a virtual model.

• Current Photovoltaic Research
• /
• v.6 no.2
• /
• pp.49-55
• /
• 2018

Recently solar cell industry needs the optimal design of Czochralski process for low cost high quality silicon mono crystalline ingot. Because market needs both high efficient solar cell and similar cost with multi-crystalline Si ingot. For cost reduction in Czochralski process, first of all energy reduction should be completed because Czochralski process is high energy consumption process. For this purpose we studied optimal water-cooling tube design and simultaneously we also check the quality of ingot with Von mises stress and V(pull speed of ingot)/G(temperature gradient to the crystallization) values. At this research we used $CG-Sim^{(R)}$ S/W package and finally we got improved water-cooling tube design than normally used process in present industry. The optimal water-cooling tube length should be 200mm. The result will be adopted at real industry.

• Journal of Institute of Control, Robotics and Systems
• /
• v.4 no.2
• /
• pp.246-255
• /
• 1998

This paper presents a novel method for real-time malfunction detection of plasma etching process using EPD signal traces. First, many reference EPD signal traces are collected using monochromator and data acquisition system in normal etching processes. Critical points are defined by applying differentiation and zero-crossing method to the collected reference signal traces. Critical parameters such as intensity, slope, time, peak, overshoot, etc., determined by critical points, and frame attributes transformed signal-to symbol of reference signal traces are saved. Also, UCL(Upper Control Limit) and LCL(Lower Control Limit) are obtained by mean and standard deviation of critical parameters. Then, test EPD signal traces are collected in the actual processes, and frame attributes and critical parameters are obtained using the above mentioned method. Process malfunctions are detected in real-time by applying SPC(Statistical Process Control) method to critical parameters. the Real-time malfunction detection method presented in this paper was applied to actual processes and the results indicated that it was proved to be able to supplement disadvantages of existing quality control check inspecting or testing random-selected devices and detect process malfunctions correctly in real-time.