• 한국가스학회지
• /
• 제11권1호
• /
• pp.46-50
• /
• 2007

LPG저장설비나 용기에서 유입되는 LPG가 기화기로부터 충분한 열을 공급받지 못해 액체 상태로 기화기 출구를 통해 나가게 될 경우를 대비하여 설치한 액 유출 방지장치가 정상적으로 기화기 출구부를 차단하지 못하면 기화기 후단부에 설치한 계량기등이 LPG의 순간적인 부피팽창으로 인하여 고장나거나 파열하게 된다. 따라서 이와 같은 기화기 관련 사고를 분석하기 위하여 새롭게 개발한 투명기화통을 이용하여 기화기의 성능평가 및 액유출 방지장치를 분석하였다. 이로부터 액 유출 방지장치 플로트 밸브의 적절한 비중값과 자연대류만으로 열전달을 수행하는 LPG 기화기에 적합한 온도조절 범위를 결정하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.436-438
• /
• 2007

As the sensors and communication technology get advance, the remote health diagnosis for patients and senior persons at home are possible now without visiting doctors in hospitals. A low-power ubiquitous health check device was developed adapting Real-Time Embedded Linux is developed. This ubiquitous device is consisted of three sensors. The wrist type health checking terminal acquires periodically the health data by using a blood pressure sensor, a pulse sensor and a body temperature sensor. It transmits the health data to the access point located at the home center through the ZigBee wireless communication modem. This health data collector or access point device sends the data again to the main server operated in a hospital or health care organization. The health server control continuously the input data and sends an alarm signal to the assigned. doctor and responsible persons using cellular SMS when any dangerous events occur. This wrist type health check device has an embedded linux OS using Intel PAX255 MPU. The developed U-Health system is applicable for checking patients health in remote at home. And their family or related persons in remote site can check the patients health status at any time. They can be assured by receiving SMS record and alarm of emergency case which is transmitted from the health server.

• 한국작물학회지
• /
• 제47권
• /
• pp.200-215
• /
• 2002

There are some international standards and organization controling the quality characteristics of varieties and seeds such as UPOV, OECD, ISTA, AOSA. The National List system to check variety performance such as quality characteristics of plant varieties and seeds was established by each countries. The UPOV (International Union for the Protection of New varieties of Plant) regulates the requirement of plant variety protection that is distinctness (D), uniformity (U), stability (S) (here in after called DUS), Novelty and Denomination, and some quality characteristics are used to examine the requirement of plant variety protection by each crops. OECD (Organization for Economic Cooperation Development) seed scheme regulates the seed certification for seed trade between countries. ISTA (International Seed Testing Association) and AOSA(Association for Official Seed Analyst) regulates the seed analysis standard and methods. Most of the countries in Europe has the National List system, which check the value for cultivation and use(VCU), that is to say, variety performance such as yield, quality and stress to environment. All the seeds should be enlisted in the National List before sell the seed in their country. All the quality characteristics checked variety performance are for instance, amylose and amylopectin content in rice, molting quality, $\beta$-glucan, protein in barley, protein and sugar content in soybean, sugar and amylopectin content in corn etc. Conditions for the protection of new variety of plant are DUS. Quality characteristics may be the important characteristics and used to check DUS in crop by crop. It is very important to develop a new characteristics and establish standard method fur examine the VCU and DUS test for each crop.

• 한국BIM학회 논문집
• /
• 제12권3호
• /
• pp.30-38
• /
• 2022

Railway is compsed in various components, such as subgrade, track bed, sleeper, rail, and overhead line, on a linear space. Therefore, comprehensive work for various design standards and guidelines is required when designing a railway facility. For this reason, much time and effort are required to review the relevant design standards and guidelines. While, automatic legal check system for BIM models has been developed in the architectural engineering, it has not been developed in the railway engineering. This study reviews the korean design standard and the korean code for railway engineering, and suggests some rule items of logical information. Comparing the suggested rule items to the railway BIM library, items of logical information and additional attribute information are obtained. The analysis results of railway design standards and BIM library presented in this study would be utilized for defining rule-set items that is essential for development of the automatic legal check system for railway BIM models.

• 한국융합학회논문지
• /
• 제9권4호
• /
• pp.23-29
• /
• 2018

건설현장에서 흔히 발생하는 안전관리 문제점 중 시정조치 지연으로 인해 발생하는 재해율을 낮추기 위해, 기존의 시스템 중 점검 후 시정조치를 할 때까지 발생하는 시간을 단축하기 위하여 사전에 사고유형 데이터베이스를 구축하고 점검시 유사도 검사를 이용하여 점검자에게 문제점을 실시간으로 알려주어 현장에서 바로 시정조치를 수행할 수 있는 시스템을 모델링하여, 안전사고에 보다 적극적으로 대처할 수 있는 시스템을 연구하였다. 연구 결과 90 %이상의 개방 효과와 60 %이상의 안전사고 감소율이 있음을 알 수 있었다. 이 시스템을 기반으로 음성 인식과 딥러닝을 결합하여 보다 효과적인 시스템을 지속적으로 연구 할 것이다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.737-747
• /
• 2011

5678SMRT has installed various sensor for operating conditions(field of electric, facilities, signal, communication equipment and track) and environment of Every Function Room for remotely detecting and monitoring. Installed sound sensor for analyzed after remotely heard the noise of every equipment at Every Function Room and temperature sensor for check the temperature condition of Every Function Room. Additional installed voltage sensor in signal equipment room for monitoring RF track-circuit's voltage condition. Installed displacement sensor at The Chungdam bridge's railway for measuring and monitoring track displacement caused by temperature change and Pan/Tilt camera at sub-station and drainage for remotely field monitoring. Installed sensor for each equipment's operating condition and failure at Every Function Room then periodic check of workforce turned to around-the-clock surveillance by sensor therefore improvement of operating equipment. SMRT is lots of prevent a failure by Immediately detect of precondition of equipment failure by analyzed the sensor data. If the occurrence of an failure, become detected Immediately so possibility correct diagnosis and order by remotely field check by installed camera and sound sensor at field.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.684-696
• /
• 2018

The mission in missile systems can be conducted with multiple phases according to the characteristics of the systems and the targets. The safeguarded multi-phase mission includes a safeguarded phase before launch for considering the safety of operators in unexpected squib activation. However, the safeguard function should be disabled after launch to complete the mission. Therefore, the squib system needs to be selectively activated according to the phases. This paper presents a selective squib activation and check circuit design for safeguarded multi-phase missions in missile systems. The presented circuit design was implemented with various electronic components including a field-programmable gate array(FPGA). Its functions and performance were validated by both many ground tests and several flight tests.

• 대한전자공학회논문지TC
• /
• 제47권11호
• /
• pp.36-42
• /
• 2010

이 논문은 유클리드 기하학과 Circulant Permutation Matrices에서 병렬 구성을 기반으로 하는 Quasi-cyclic Low-density parity-check (QC-LDPC) 코드의 생성을 위한 하이브리드한 접근방식을 나타낸다. 이 방법으로 생성된 코드는 넓은 둘레(Large Girth)와 저밀도(Low Density)를 가진 규칙적인 코드로 나타내어진다. 시뮬레이션 결과는 이 코드들이 반복 복호(Iterative Decoding)를 통해 좋은 성능을 갖는것과 부호화되지 않은 시스템에서 좋은 코딩 이득을 달성하는 것을 보인다.

• 경영과학
• /
• 제18권1호
• /
• pp.79-88
• /
• 2001

We often feel the necessity to communicate with members involved in a project to remote discuss business activities, needs for the fast file transfer, and check the existence of members to talk with. There are some commercial applications in these problems. However, in addition to those existing functions, this study focuses especially on adding couple of functions such as automatic responding function, in which a sender of a message automatically knows if a receiver checks the message. Its application is that a project leader sends an important message and later on can check at his desk the fact that who have checked their messages. The prototype application, build in this study, will check the correctness of every sub-function, and then the interface of inter-sub-functions, finally the integrity of the entire system, so that important information will not be lost among members of a project in the real world situation.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 제39회 하계학술대회
• /
• pp.2214-2215
• /
• 2008

KESCO performed periodical inspection every 1${\sim}$3 years to check the status of maintenance and performance of electric installations for general use (less than 600V in voltage and 75kW in capacity in residential homes) but recently a resident have been avoiding periodical check due to increase of sex crime and empty house, which more and more difficult to secure electrical safety of installation. In order to solve non-inspection problems and improve efficiency of inspection, this paper introduce the model of remote monitoring system that check electrical facilites for general use and we are developing remote monitoring device for reliability test.