• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.11a
• /
• pp.145-149
• /
• 2000

In this paper, Firstly, it is shown that the bending mode vibration of check valve is comparatively large because resonance. Secondly in order to decrese the bending mode vibration of check valve, some practical dynamic vibration absorber have been developed and its effectiveness is investigated as installing it at the check valve of piping system practically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.9 no.3
• /
• pp.201-207
• /
• 2009

As the existing backdoor worked at user mode, which is application mode, it was possible to check the existence of backdoor by the integrity check of system file. However, for the backdoor using kernel module, it is impossible to check its existence by the integrity check of system file. Even various programs were presented to protect this LKM Kernel backdoor, there is limitation in protection as they examine the changes on the system Call Table. This study, recognizing the danger of invasion through such LKM Kernel backdoor, will provide alternative for the limitation which the existing integrity check couldn't prevent intrusion through Kernel backdoor.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.64-71
• /
• 2023

In the recent defence industries, it is required to develop the small and low cost embedded systems for guided missiles. According to the characteristics of guided missiles, the mission is conducted with multiple phases, which include a squib activation phase. By considering the unexpected squib activation, the squib system should be disabled after the launch of a guided missile. Therefore, the squib system needs to include the functions of the safe ignition and status check. This paper presents the squib ignition and status check circuits design for the compact embedded systems in guided missiles. Validation results show that for the functions of the squib ignition and status check, the presented circuits design performs well. The designed circuits also were implemented with various electronic devices and validated by the ground and flight tests.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1225-1230
• /
• 2007

The turnover-type sluice gate is typically actuated by the hydrauic system. The hydraulic system may be a open circuit type or a closed circuit type. The open circuit type hydraulic system is composed of a uni-directional pump, a directional control valve, pilot operated check valves, flow control valves, single-rod cylinders. The closed circuit type hydraulic system is composed of a bi-directional pump, pilot operated check valves, check valves, a counter balance valve, single-rod cylinders. The energy efficiencies of two hydraulic systems for the turnover-type sluice gate are compared here.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.22 no.50
• /
• pp.293-302
• /
• 1999

This paper presents an efficient reengineering technique for the logistics process innovation which is the foundation of supply-chain management. Based on consulting experience on the domestic manufacturing firms, this paper provides promotion step for logistics innovation and six reengineering points including check system for customer's credit limit, check system of real-time inventory information, automatic system for sequential production plan, automatic order-release system, automatic packing system, and happy-call system for order-forward information. For each reengineering point, application cases in domestic industry are also presented.

• Molecular & Cellular Toxicology
• /
• v.2 no.2
• /
• pp.120-125
• /
• 2006

Phenytoin is an anti-epileptic. It works by slowing down impulses in the brain that cause seizures. The recent microarray technology enables us to understand possible mechanisms of genes related to compounds which have toxicity in biological system. We have studied that the effect of a compound related to hepatotoxin in vitro system using a rat whole genome microarray. In this study, we have used a rat liver epithelial cell line WB-F344 and phenytoin as a hepatotoxin. WB-F344 was treated with phenytoin for 1 to 24 hours. Total RNA was isolated at times 1, 6 and 24h following treatment of phenytoin, and hybridized to the microarray containing about 22,000 rat genes. After analysis with clustering methods, we have identified a total of 1,455 differentially expressed genes during the time course. Interestingly, about 1,049 genes exhibited differential expression pattern in response to phenytoin in early time. Therefore, the identification of genes associated with phenytoin in early response may give important insights into various toxicogenomic studies in vitro system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1A
• /
• pp.34-42
• /
• 2012

Low density parity check (LDPC) code is widely used, since it shows superior performance close to Shannon limit and its decoding complexity is lower than turbo code. Recently, it is used as a channel code to decode Wyner-Ziv frames in distributed video coding (DVC) system. In this paper, we propose an efficient method to design the parity check matrix H of LDPC codes. In order to apply LDPC code to DVC system, the LDPC code should have rate compatibility. Thus, we also propose a method to merge check nodes of LDPC code to attain the rate compatibility. LDPC code is designed using ACE algorithm and check nodes are merged for a given code rate to maximize the error correction capability. The performance of the designed LDPC code is analyzed extensively by computer simulations.

• Atmosphere
• /
• v.26 no.3
• /
• pp.461-471
• /
• 2016

A quality check algorithm for the Weather Information Service Engine pulsed Doppler wind lidar is developed from a view point of spatial and temporal consistencies of observed wind speed. Threshold values for quality check are determined by statistical analysis on the standard deviation of 3-component of wind speed obtained by a wind lidar, and the vertical gradient of horizontal wind speed obtained by a radiosonde system. The algorithm includes carrier-to-noise ratio (CNR) check, data availability check, and vertical gradient of horizontal wind speed check. That is, data sets whose CNR is less than -29 dB, data availability is less than 90%, or vertical gradient of horizontal wind speed is less than $-0.028s^{-1}$ or larger than $0.032s^{-1}$ are classified as 'doubtful', and flagged. The developed quality check algorithm is applied to data obtained at Bucheon station for the period from 1 to 30 September 2015. It is found that the number of 'doubtful' data shows maxima around 2000 m high, but the ratio of 'doubtful' to height-total data increases with increasing height due to atmospheric boundary height, cloud, or rainfall, etc. It is also found that the quality check by data availability is more effective than those by carrier to noise ratio or vertical gradient of horizontal wind speed to remove an erroneous noise data.

• Nuclear Engineering and Technology
• /
• v.36 no.6
• /
• pp.540-548
• /
• 2004

Check valve failure is one of the worst problems in nuclear power plants. Recently, many researches have been based on new technology using accelerometers and ultrasonic and magnetic flux detection have been carried out. Here, we have suggested a method that uses acoustic emission sensors for detecting the failures of check valves through measuring and analyzing backward leakage flow, a system that works without disassembling the check valve. For validating the suggested acoustic emission sensor methodology, we designed a hydraulic test loop with a check valve. We have assumed in this study that check valve failure is caused by disk wear or by the insertion of a foreign object. In addition, we have developed diagnostic algorithms by using a neural network model to identify the type and size of the failure in the check valve. Our results show that the proposed diagnostic algorithm with acoustic emission sensors is a good solution for identifying check valve failure without necessitating any disassembly work.

• Health Policy and Management
• /
• v.4 no.1
• /
• pp.138-175
• /
• 1994

The objectives of this study are (i) to review current situations and problems of the occupational health care system with emphasis on reforming the organizations and services, (ii) to find out a disirable occupational health system model based on integration of the occupational health system and the general health system, and finally, (iii) to suggest policy implications in occupational health services in the light of objectives of the newly emerging national health insurance reform in Korea. The major policy implications of this study are as follows: 1. In the long-run, within the occupational health system, preventive occupational health services such as employees' physical check-up, working environment examination, etc should financially be integrated with industrial accident compensation insurance. Currently separately paying expenses for each different category of services by the owner of an enterprise should be disbursed once through the payment of contributions of industrial accident compensation insurance. And then, it is necessary to strengthen and expand the role and function of industrial accident compensation insurance to cover preventive occupational health services. 2. The occupational health system should be integrated with general health system for its effective management. For the short-term policy, it is necessary to eliminate fiscal and access barrier between industrial accident compensation insurance and national health insurance by means of ex post facto settlement of accounts. The duplication of employees' physical check- ups between under the health insurance program and under the industrial health services must be coordinated in a manner either through mutual authorization by the two parties concerned or through merge into the health insurance. 3. The intent of current employees' physical check-up system focused on detection of occupational diseases, should be converted to an idea of medical surveillance system or biological moritoring system. The introduction of medical surveillance or biological monitoring system is a necessary condition to build a positive, effective and inexpensive occupational health care system.