• Title/Summary/Keyword: Check System

Search Result 3,318, Processing Time 0.04 seconds

Application of a Strip Speed Measurement for Hot Strip Rolling (열연 사상압연공정 스탠드간 열연판속도 측정시스템 적용연구)

  • 홍성철;최승갑
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 2000.10a
    • /
    • pp.212-212
    • /
    • 2000
  • This study was performed to construct a hot strip speed measuring system and check over whether the measured speed can be used for improving the mass flow of the head-end part of a hot strip in the 7-stand finishing mill. Because the mass flow in hot rolling mill affects the looper operation and the thickness and width control of a strip, accurate measurement of strip speed ie important. The measured speed was compared with the roll speeds of No. 6 and No.7 stand to check the performance of the system and analyzed to find how to apply the speed. As a result, it is shown that the accuracy of the system is enough, strip thickness error can be reduced by -275∼+200$\mu\textrm{m}$ using the measured speed and the existing FSU model has low accuracy for predicting forward slip rate. A neural network was developed to calculate forward slip rate instead of FSU model. The test result of the neural network shows that the neural network is more accurate than the FSU model.

  • PDF

Development of Land Suitability Classification System for Rational Agricultural Land Use Planning (농지이용계획의 합리적 책정을 위한 농지적성 평가기법의 개발)

  • 황한철;최수명
    • Journal of Korean Society of Rural Planning
    • /
    • v.3 no.2
    • /
    • pp.102-111
    • /
    • 1997
  • For rational agricultural land use planning, it is quite necessary to get hold of land suitability precisely and to make decision on land use patterns accordingly. In the methodological viewpoint, objective and scientific evaluation techniques for land suitability classification should be supported for the systematic land use planning. As one of technical development approaches to rational land use planning, this study tried to frame a land suitability evaluation system for agricultural purposes. Evaluation unit is defined as a tract of land bounded by road, other land units and topographical features. And quantification theory was applied in the determination works of evaluation criteria. The administrative area of Namsa-myon(district), Yongin-si(city), Kyunggi-do(province) was selected for the case study. In order to check the feasibility of the evaluation system developed in the study, field check team, consisting of 2 government officers and 2 representative farmers, carried out evaluation works by observation on 148 sample land units, 10% of total 1,480 ones. Between estimated and observed results, there showed very good relationship of its multiple correlation coefficient, R=0.9467.

  • PDF

Unveiling the Properties of FLS 1718+59: A Galaxy-Galaxy Gravitational Lens System

  • Taak, Yoon Chan;Im, Myungshin
    • The Bulletin of The Korean Astronomical Society
    • /
    • v.39 no.1
    • /
    • pp.36.2-36.2
    • /
    • 2014
  • We present results of the analysis of FLS 1718+59, a galaxy-galaxy gravitational lens system in the Spitzer First Look Survey (FLS) Field. A background galaxy (z = 0.245) is severely distorted by an elliptical galaxy (z = 0.08), by gravitational lensing. We analyze this system by several methods, including Ellipse and Galfit fitting, gravitational lens modeling (gravlens), and SED fitting. Properties of the lens galaxy can be obtained: from Galfit we measure the effective radius and the average surface brightness inside it, and from gravlens we estimate the total mass inside the Einstein radius (lensing mass). We use these parameters to check that the lens galaxy is located on the Fundamental Plane. Also, we conduct SED fitting for the lens galaxy and estimate the stellar mass, and compare this with the lensing mass of the lens galaxy to check the M-L relation.

  • PDF

A study of safety management assessment method of unit working process (단위작업공정의 안전관리 평가방법에 대한 연구)

  • Lee, Kang-Bok;Kim, Geon-Ho;Kim, Yoon-Sung;Kwon, Sang-Myun;Lee, Jai-Won;Kang, Kyung-Sik
    • Journal of the Korea Safety Management & Science
    • /
    • v.9 no.2
    • /
    • pp.1-8
    • /
    • 2007
  • Safety check-up and individual education, safety status wishes to present included safety assessment table for safety management assessment system construction about unit work process in Study. Safety management assessment table gives each grades about worker of unit work process, safety check-up, education, management and identifies merits and demerits of unit work process, it is that propose safety management assessment system that can reduce accident occurrence possibility.

A Study on Voltage Stability Enhancement of Power System using the STATCOM (STATCOM을 이용한 전력계통의 전압안정도 향상방안에 관한 연구)

  • Gim, Jea-Hyeon;Kim, Yang-Il;Ki, Kyung-Hyun;Jeung, Sung-Won
    • Proceedings of the KIEE Conference
    • /
    • 2003.11a
    • /
    • pp.255-258
    • /
    • 2003
  • In this paper there are different methods used to study the voltage stability, such as the P-V curve method. Jacobian method and the voltage collapse proximity indicator(L-index) method. The P-V curve method is to check operating margin from the maximum operating point. The Jacobian method is to check the eigenvalue or the minimum singular value of the load flow Jacobian matrix. If the power system is unstable, one of the eigenvalues, at least, has crossed the imaginary axis. The L-index method is to quantify how to close a particular operating point. This paper describes these methods to select the best location of FACTS and demonstrate the effectiveness of STATCOM of voltage stability on the IEEE 9-bus system.

  • PDF

A study on Fire Hazard of Electric Radiant Heating Systems with Thermal Storage Using Off-peak Electricity (심야용 축열식 전기온풍기의 화재 위험성에 관한 연구)

  • Park, Min-Yeong;Mun, Yong-Su
    • Journal of Korean Institute of Fire Investigation
    • /
    • v.8 no.1
    • /
    • pp.41-48
    • /
    • 2006
  • The purpose of this study is to identify the fire danger of the electric radiant heating system and check the way how to use it and the problems that could be possible through a actual case. We carry out an experiment to identify the possibility of the fire in the similar condition of the actual fire case. The results of this study are as follows. It is a possible condition to fire if the air blast of the electric radiant heating system is blocked by some combustible materials such as plastic bags continuously. A temperature sensor and a residual current device are necessary to disconnect the power source. It is also necessary to attach a notice in front of the electric radiant hearing system that shows users the fire danger to forbid the possible fire. Fires could be happened by internal defects of the electronic products. However, we can also find many external reasons to happen fires. Therefore, we need to check all reasons to make fires in the scene of a fire.

  • PDF

Development of Retina Healthcare Service System Using Smart Phone

  • Park, Gi Hun;Han, Ju Hyuck;Kim, Yong Suk
    • International Journal of Advanced Culture Technology
    • /
    • v.7 no.2
    • /
    • pp.227-237
    • /
    • 2019
  • In this paper, we have developed a Retina Healthcare Service System through which the patient himself/herself can manage his/her retina health. In the case of conventional portable ophthalmic cameras, patients cannot check their eye health on their own because most of them are used by doctor in environments where ophthalmography cannot be performed properly. This system consists of web, app and camera modules, and when a patient mounts a camera module for fundus photography on his / her smart phone and then photographs his / her fundus through the app, the image is transmitted to a server, and the transmitted image reads the fundus the patient's fundus image status in the fundus image reading model learned using deep learning. When the doctor expresses his/her opinions about the patient 's eye condition based on the reading result and the fundus photograph, the patient can check through the app and judge whether to receive ophthalmologic treatment.

Perception and Consumption Status of Food Labeling of Processed Foods among College Students in Daegu.Gyeongbuk Area (대구.경북지역 대학생의 식품 표시에 대한 인식 및 가공식품 소비 실태)

  • Park, Eo-Jin
    • Journal of the East Asian Society of Dietary Life
    • /
    • v.23 no.6
    • /
    • pp.671-680
    • /
    • 2013
  • This study was conducted to examine the consumption realities of processed food and the perception of food labeling with targets of university students attending schools in Daegu and Gyeongbuk areas. The reason for buying processed food was because it is easy to cook. As for the number of using processed food, it was answered that everyday dairy products, noodles, breads and snacks for 3~4 times a month, and meat processed foods, canned foods, sauces and frozen foods for 2~3 times a month. With regard to selecting processed products, both male and female students answered with taste and price first, barely considering the safety and nutritional elements. It turned out that they check the price, expiration date and country of origin in order upon buying processed foods. Most of them recognized food labeling, but answered that they checked it sometimes in order to check the 'expiration date' and the 'calories'. They were aware of the food nutritional contents indication. It was turned out that male students check it for nutrients and female students for weight control. The effect of the processed food indication was that it is easy to choose the necessary foods for health and as well as for comparing the food with other products. The satisfaction of the food labeling system was mediocre. The results indicated that the food indication system needs to be educated or promoted.