• Journal of Korean Academy of Nursing
• /
• v.29 no.2
• /
• pp.258-270
• /
• 1999

This study was carried out to offer the basic data for more qualitative lives of the middle-aged women through their health maintenance and control. So, the researcher reviewed and analyzed the health problems of the middle-aged women, the differences of main symptoms in each subject, positive ratcs in screening tests, the difference of screening tests with age and the correlation of obesity and blood pressure with screening tests. All subjects were 218 women(40-59years) who had a check-up at a comprehensive health check-up center in K University Hospital in Seoul from July 1, 1998 to August 31. 1998. Questionaires were developed to get subjects, general characteristics. main symptoms, medical examination and diagnosed disease by the researcher referring through the questionaires of comprehensive health check-up center and the medical recorders were used as a tool of study. The researcher analyzed the data with SPSS PC+ ; the distribution of the subjects, general characteristics and main symptoms with percentage : the difference between main symptoms and screening tests with X$^2$-test, ANOVA. The results are as follows. 1) Among the age distribution, most were 40-45 years old and unemployed. 2) The most common complaints were indigestion in digestive system, cough in respiratory system, heart beat in cardiovascular system, general sweat in endocrine system. edema in urinary system, easy bruise in hematologic system, backache in musculoskeletal system, headache in psychoneurologic system, lochia in gynecology, itch in dermatology system, eye ball pain in visual system and tinnitus in auditory system. 3) In main symptoms according to age, the 40-45 age group had a higher rate of complaints in digestive system and gynecology than other age group ; the 46-49 age group in endocrine system. 4) The main symptoms according to diagnosis had no difference statistically. 5) The screening tests which showed high rates of abnormality were mammography(the highest), abdominal ultrasonography, upper gastrointestinal series/gastrofiberscopy, PFT. In all age group the highest rate of abnormality was seen in mammography. 6) In screening tests according to age. the 46-49 age group showed higher positive rates of pap smear, blood sugar test, urine test than any other age group ; the 50-55 age group showerd higher positive rates of obesity, BP, chest X-ray, abdominal ultrasonography, ESR, SGOT, CRP and urine micro. 7) In correlation of obesity with screening test, the obesity group showed higher positive rates of blood pressure, chest X-ray, abdominal ultrasonography, HCT and CRP than the normal weight group. 8) In correlation of blood pressure with screening test, the hypertension group showed higher positive rate of obesity, chest X-ray, abdominal ultrasonography, pap smear and blood sugar than the normal blood pressure group. In conculusion, the middle-aged women have various physical symptoms and affected by age. The obesity and BP have an important effect on the health of the middle aged women. Therefore, this study is considered significant as data for qualitative lives of the middle-aged women playing an important part of family health care by catching of their health problem complaints for prevention of disease and promotion of health.

• Journal of the Korean Society of Earth Science Education
• /
• v.7 no.3
• /
• pp.358-370
• /
• 2014

The purpose of this study is to analyze the relationship between the mental model and the depictive gestures observed in the explanations of elementary school students about the reason why seasons change. As a result of analysis in gestures of each mental model, mental model was remembered as "motion" in case of CM-type, and showed more "Exphoric" gestures that expressed gesture as a language. CF type is remembered in "writings or pictures," and metaphoric gestures were used when explaining some alternative concepts. CF-UM type explained with language in detail, and showed a number of gestures with "Lexical." Analyzing depictive gestures, even with sub-categories such as rotation, revolution and meridian altitude, etc., a great many types of gestures were expressed such as indicating with fingers, palms, arms, ball-point pens, and fists, etc., or drawing, spinning and indicating them. We could check up concept understandings of the students through this. In addition, as we analyzed inconsistencies among external representations such as verbal language and gesture, writing and gesture, and picture and gesture, we realized that gestures can help understanding mental models of the students, and sometimes, we could know that information that cannot be shown by linguistic explanations or pictures was expressed in gestures. Additionally, we looked into two research participants that showed conspicuous differences. One participant seemed to be wrong as he used his own expressions, but he expressed with gestures precisely, while the other participant seemed to be accurate, but when he analyzed gestures, he had whimsical concepts.

• Explosives and Blasting
• /
• v.23 no.1
• /
• pp.65-77
• /
• 2005

Reflecting the fact that there are increasing number of old high-story apartment structures in urban area, it is expected that the demand of blasting demolition will increase in the near future. It is of great important to make up for the insufficient empirical knowledge in blasting demolition through priori method such as computer simulation. Computer simulation of the blasting demolition involves complicated process. In the past domestic researches, two-dimensional bonded particle model was used to examine the overall demolition behavior of a five-story simple structure. It was observed that the two-dimensional simulation did not properly simulate the collapsing behavior of a structure mainly due to the reduced degree of freedom. In this study, three-dimensional simulation was tried. It consumed a great amount of calculation time, which limited the extent of the study. A few parameters, such as delay times, amount of charge at each hole, ball properties, were modified in order to check oui; their effect on the collapsing behavior. The differences were observed as expected but the collapsing behavior did not exactly coincide with the test blasting with a scaled model.

• Tribology and Lubricants
• /
• v.37 no.6
• /
• pp.246-252
• /
• 2021

Among the engine components of an internal combustion engine, the valve train is a series of systems that supply intake gas to the combustion chamber and operate intake and exhaust valves that discharge exhaust gas. If excessive wear occurs in the valve train system, the suction and exhaust valves do not open and close on time, which leads to abnormal combustion and exhaust gas. In this study, we conduct experiments and analyses on friction and wear characteristics of the valve train system. Moreover, we experimentally study the correlation between the pinball and pinball cap on engine oil lubrication, friction experiment, wear amount analysis, and surface analysis. Specifically, we experiment using Ball on reciprocating tribo-tester and apply commercial engine oil sold on the market engine oil. We construct the experimental conditions for each new oil and oil. Accordingly, the completed specimen was subjected to a confocal microscope to check the wear volume, observe the surface of the specimen, and confirm the elemental components using a scanning microscope (SEM) and an energy dispersion X-ray spectrometer (EDS). Through this experiment, we analyze the friction and wear characteristics of valve train components according to engine oil grade, and the obtained data serve as an effective engine oil management method.

• Journal of Powder Materials
• /
• v.30 no.5
• /
• pp.415-423
• /
• 2023

With the increasing attention to environmental pollution caused by particulate matter globally, the automotive industry has also become increasingly interested in particulate matter, especially particulate matter generated by automobile brake systems. Here, we designed a coating composition and analyzed its mechanical properties to reduce particulate matter generated by brake systems during braking of vehicles. We designed a composition to check the mechanical properties change by adding Cr₃C₂ and YSZ to the WC-Ni-Cr composite composition. Based on the designed composition, coating samples were manufactured, and the coating properties were analyzed by Vickers hardness and ball-on-disk tests. As a result of the experiments, we found that the hardness and friction coefficient of the coating increased as the amount of Cr₃C₂ added decreased. Furthermore, we found that the hardness of the coating layer decreased when YSZ was added at 20vol%, but the friction coefficient was higher than the composition with Cr₃C₂ addition.

• The Journal of Korean Society for Radiation Therapy
• /
• v.31 no.1
• /
• pp.17-24
• /
• 2019

Purpose: The present study aims to assess the level of coherency and the accuracy of Point dose of the Isocenter of VERO, a linear accelerator developed for the purpose of the Stereotactic Body Radiation Therapy(SBRT). Materials and Method: The study was conducted randomly with 10 treatment plans among SBRT patients in Kyungpook National University Chilgok Hospital, using VERO, a linear accelerator between June and December, 2018. In order to assess the equipment's power stability level, we measured the output constancy by using PTW-LinaCheck, an output detector. We also attempted to measure the level of accuracy of the equipment's Laser, kV(Kilo Voltage) imaging System, and MV(Mega Voltage) Beam by using Tofu Phantom(BrainLab, Germany) to assess the accuracy level of geometrical Isocenter. We conducted a comparative analysis to assess the accuracy level of the dose by using an acrylic Phantom($30{\times}30{\times}20cm$), a calibrated ion chamber CC-01(IBA Dosimetry), and an Electrometer(IBA, Dosimetry). Results: The output uniformity of VERO was calculated to be 0.66 %. As for geometrical Isocenter accuracy, we analyzed the error values of ball Isocenter of inner Phantom, and the results showed a maximum of 0.4 mm, a minimum of 0.0 mm, and an average of 0.28 mm on X-axis, and a maximum of -0.4 mm, a minimum of 0.0 mm, and an average of -0.24 mm on Y-axis. A comparison and evaluation of the treatment plan dose with the actual measured dose resulted in a maximum of 0.97 % and a minimum of 0.08 %. Conclusion: The equipment's average output dose was calculated to be 0.66 %, meeting the ${\pm}3%$ tolerance, which was considered as a much uniform fashion. As for the accuracy assessment of the geometric Isocenter, the results met the recommended criteria of ${\pm}1mm$ tolerance, affirming a high level of reproducibility of the patient's posture. The difference between the treatment plan dose and the actual measurement dose was calculated to be 0.52 % on average, significantly less than the 3 % tolerance, confirming that it obtained predicted does. The current study suggested that VERO equipment is suitable for SBRT, and would result in notable therapeutic effect.

• Journal of the Korean Geotechnical Society
• /
• v.17 no.6
• /
• pp.111-121
• /
• 2001

Rockfall protection fences are used for diminishing rockfall damage in roads side slopes. In order to install the fences in effective way, the conditions of rock slopes and total predicted impact energy of fa11ing rock should be considered. However, the fences have been constructed without any consideration for lithology, height and slope angle of rock slope in Korea. In addition, the information about the performance of the protection fences, which should be evaluated by in-situ test or laboratory test in order to check out the practical use in the field, is not available. Therefore, in design manual for the rockfall protection fence, the specific details for the installation of this type of fence are not provided yet. The full sized rockfall in situ test was carried out for the calculation of falling energy of rock and the evaluation of the maximum energy absorbing capacity of fence. For this test, the rock slopes whose heights are about 20 m and dip angle of 65 degree, have been chosen. This is because those geometries are mean height and slope angle of most road cut slopes along Korean national highway. Based on the preliminary simulation procedure, four different sizes of concrete ball (0.7, 1.3, 2.3 and 4.3 ton) were prepared and flour different types of protection fence were constructed. The results of this test provide information about the maximum energy absorbing capacity of the fence, kinetic energy of rockfall and restitution coefficient, and these results can be utilized in the establishment of rockfall fence design and construction manual.

• The Journal of Korean Physical Therapy
• /
• v.14 no.4
• /
• pp.172-182
• /
• 2002

Objectives: We did research in the cause of the Pitchers' injury and their recovery process to make a detailed injury list for the purpose of finding the cause of the Korean professional pitchers' injury and its classification. We drew the conclusion through the results as following. Methods: We posed a question to the 80 pitchers playing in the first team of the eight Korean professional baseball team and analyzed the 62 pieces of question paper except the paper having a mistake. We used SAS/PC statistical package in analyzing the data. Results: In the frequency of the pitchers' shoulder injury in the last three years, the injured of all the players were 61.3$\%$ and the injury free players were 28.7$\%$. The cause of the injury was 45.2$\%$ wrong pitching motion, which was the highest value. For the shape of a pain when injured, the reverberation ache feeling when he is hit in the weight commanded an absolute majority as 19.4$\%$. Those who had muscular pain were 17.7$\%$, which was felt mostly at the pitching motion. The most trouble name of the injured shoulder was bicepstendinitis as 16.1$\%$ while the injury of shoulder joint was the lowest as 1.6$\%$. As the most widely used treatment, 25.8 percent of all the players had taken an electronical thraphy after injury. 14.5 percent of the players who had an injury to the shoulder told that they have an operation and 85 percent of them didn't. As a sort of the operation, a repairing of labrum was 44.4 percent, which is the highest value and the 77.8 percent pitchers are performing a normal pitching through rehabilitation after the operation and 22.2 percent of them are undergoing rehabilitation training. Conclusion: The research have shown that the main cause of the injury, concerning the Korean professional pitchers throwing lots of ball in both matches and practices, is overuse syndrome, bad mechanism, muscle weakness and instability of balance. I think that the role of trainer, physical therapy, and team physician taking charge of the players' injury must learn physical test method by heart exactly to check up the state of the injury definitely at the initial phase. Moreover, when the cause of the injury part after a close examination is discovered, the scientific and good surgery is essential to the rehabilitation success and making a classification of shoulder instability is useful to make a operation plan as well as the players' rehabilitation, treatment.

• Journal of radiological science and technology
• /
• v.36 no.2
• /
• pp.123-129
• /
• 2013

This study investigated the rate of setup variance by the rotating unbalance of gantry in image-guided radiation therapy. The equipments used linear accelerator(Elekta Synergy TM, UK) and a three-dimensional volume imaging mode(3D Volume View) in cone beam computed tomography(CBCT) system. 2D images obtained by rotating $360^{\circ}$and $180^{\circ}$ were reconstructed to 3D image. Catpan503 phantom and homogeneous phantom were used to measure the setup errors. Ball-bearing phantom was used to check the rotation axis of the CBCT. The volume image from CBCT using Catphan503 phantom and homogeneous phantom were analyzed and compared to images from conventional CT in the six dimensional view(X, Y, Z, Roll, Pitch, and Yaw). The variance ratio of setup error were difference in X 0.6 mm, Y 0.5 mm Z 0.5 mm when the gantry rotated $360^{\circ}$ in orthogonal coordinate. whereas rotated $180^{\circ}$, the error measured 0.9 mm, 0.2 mm, 0.3 mm in X, Y, Z respectively. In the rotating coordinates, the more increased the rotating unbalance, the more raised average ratio of setup errors. The resolution of CBCT images showed 2 level of difference in the table recommended. CBCT had a good agreement compared to each recommended values which is the mechanical safety, geometry accuracy and image quality. The rotating unbalance of gentry vary hardly in orthogonal coordinate. However, in rotating coordinate of gantry exceeded the ${\pm}1^{\circ}$ of recommended value. Therefore, when we do sophisticated radiation therapy six dimensional correction is needed.