• 한국가스학회지
• /
• 제23권2호
• /
• pp.68-73
• /
• 2019

본 연구에서는 차대동력계 시험에서 수집한 자동차 배출가스자료를 엔진동력계에서 측정되는 동력계 단위로 변환하는 방법을 제안하였다. 엔진동력계 시험은 소요시간이 길고 비용이 높아 적용이 제한적일 경우 간편한 방법인 차대동력계 시험이 선호될 수 있다. 환산 방법은 거리기준 배출가스 자료에 모드 엔진효율을 고려하여 동력단위로 환산하는 방법이며 CO2 성분에 대해서 적용한 결과 환산 결과와 측정 결과 사이에 우수한 상관성을 확인하였다. 이 방법을 해외자료에 적용할 경우 CO2 배출성능에 대해 0.1% 이내로 일치함을 보였으나 CO, NOx 및 THC 와 같은 미량 배출성분 들은 같은 환산방법을 적용하기에는 상관성이 다소 떨어지며 추가적인 고려가 필요함을 보였다.

• 한국자동차공학회논문집
• /
• 제4권5호
• /
• pp.90-99
• /
• 1996

To keep up with the regulation of OBD II(on board diagnostics II), many detection methods for engine misfire have been developed. Among them, the method of using the crankshaft speed fluctuation is the most noticeable in the point of view of lower cost and easier installation than any others. On the basis of the results obtained from the previous engine-dynamometer test, the integrating torque index (ITI) has been introduced. In this research, the instrumental and the interfacing systems to engine control unit(ECU) are developed for the vehicle test. Therefore, the vehicle and chassis-dynamometer test can be carried out in addition to the rough road test. From this test, the previousproposed method proved that it can be applied to the real vehicle.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.112-118
• /
• 2001

In this study the leakage current measurement method based on a porous ceramic is applied to check the conductive substance caused by the ionized particles. By using engine and chassis dynamometer and an experiment vehicle, in which the hydrocarbon sensor (HC sensor) was exposed to the exhaust gas to create the electrical signal, the HC sensor in the exhaust line checked the conductive ions in emission gas. Generally the output electrical signal of HC sensor is followed with amount of hydrocarbon in the experiments in cold start and operation. By combining the electrical signal, a measure of conductivity of exhaust gas with hydrocarbon can be provided by OBD (On Board Diagnosis) II and EMS (Engine Management System).

• 융복합기술연구소 논문집
• /
• 제3권1호
• /
• pp.25-29
• /
• 2013

The purpose of this paper is to determine the fuel change and weight change impact on the fuel economy and emission characteristic of ICE (Internal Combustion Engine) vehicle. According to fuel type, fuel consumption and emission characteristics were measured and fuel used in this paper was gasoline, diesel, and LPG. Four vehicles with different weight were tested and the fuel economy were compared and analyzed by using scatter graph. Test was carried out using chassis dynamometer, CVS (Constant Volume Sampler), and emission measurement system. Diesel vehicle less emited $CO_2$ compared to gasoline and LPG. Even if same $CO_2$ between gasoline and LPG, there are difference fuel economy depending on carbon proportion of specific fuel. The heavier weight of vehicle, the worse of fuel economy and Better fuel economy performance on highway driving mode.

• 융복합기술연구소 논문집
• /
• 제4권2호
• /
• pp.67-70
• /
• 2014

Recently EU has been recognized that there is a difference of emission quantity between emission certification test mode and real-road driving test. Accordingly the European Commission is currently preparing to require real-road testing as part of the passenger car type-approval process in the EU. vehicle manufacturers from 2017 are expected to test new vehicles not only under laboratory conditions but also on the real-road, using PEMS equipment. Therefore the purpose of this study is to analyze the emission and Fuel Economy of CVS-75 mode test using chassis dynamometer and RDE test using PEMS equipment by PHEV passenger car.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.320-325
• /
• 2006

The phenomenon of squeal in disc brakes has been, and stin is, a problem for the automotive industry. Extensive research has been done in an attempt to understand the mechanisms that cause it and in developing design procedures to reduce it to make vehicles more comfortable. In this paper, the study on squeal noise of disc brake is performed using complex eigen-value analysis, The first part describes the chassis-dynamometer and the testing procedure, and second part explains how the analysis is performed and shows some of the results from typical squeal tests. Finally, to reduce squeal nose of disc brake is investigated by the effects of brake design parameter.

• 한국자동차공학회논문집
• /
• 제20권2호
• /
• pp.56-63
• /
• 2012

Environment has become a main issue nowadays. People began to show big interest in "futuristic means of transportation", which is an efficient method in $CO_2$ emissions reduction and decreasing use of oil. Due to the noise and emissions of two-wheel vehicle of internal combustion engine, electric two-wheeled vehicles have been supplied in downtown. The electric two-wheeled vehicles use battery as power source. The performance of lithium-ion battery changes as the ambient temperature changes. In this paper, analysis of performance variance of electric two-wheeled vehicles influenced by the temperature using the chassis dynamometer and the environmental chamber was carried out.

• 한국분무공학회지
• /
• 제22권2호
• /
• pp.47-54
• /
• 2017

$CO_2$ emission regulation will be prescribed and main issue in automotive industry. Mostly, vehicle's fuel efficiency deeply related to $CO_2$ emission is regulated by qualified driving test cycle by using chassis dynamometer and exhaust gas analyser. But, real driving fuel consumption rate depends so much on the individual usage profile and where it is being driven: city traffic, road conditions. In this study, vehicle model of fuel consumption rate for ICEV and PHEV was developed through co-simulation with CRUISE model and Simulink based on driving control model. The simulation results of fuel consumption rate were analysed with on-road vehicle data and compared with its official level.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2006년도 추계학술대회 논문집
• /
• pp.127-128
• /
• 2006

• 한국자동차공학회논문집
• /
• 제24권6호
• /
• pp.635-641
• /
• 2016

Regenerative braking performance of an electrically powered vehicle is closely related to driving distance per battery charge. An electric vehicle uses appropriate amounts of mechanical braking force and electromagnetic regenerative braking force to recover energy and increase driving efficiency. In particular, when it drives on a downhill road, energy recovery rate is maximized through regenerative braking during coasting based on the mass inertia of the vehicle. Since an electric two-wheeled vehicle covered in this paper is lighter than an electric four-wheeled vehicle, the improvement of its driving distance per battery charge through regenerative braking is different from an electric four-wheeled vehicle. This study compared the driving characteristics of an electric two-wheeled vehicle based on regenerative braking. Two driving test modes were simulated with a chassis dynamometer system. By analyzing the measurement of a chassis dynamometer, the driving characteristics of a two-wheel electric vehicle, such as driving efficiency, were analyzed. In addition, test results were reviewed to draw the limitations of conventional test methods for regenerative braking performance of an electric two-wheel vehicle.