• 천문학회지
• /
• 제29권spc1호
• /
• pp.433-437
• /
• 1996

We have analyzed the content of the Korean stone star chart. Ch'on-Sang-Yul-Cha-Bun-Ya-Ji-Do(here-after Ch'on-Sang-Do). In the star map we have found 1468 stars, 4 more than the Chinese star catalog Bo-Chun-Ga. The four extra stars form a constellation, Jong Dae Boo. The map projection law used in the star chart is found to be the polar equtorial and equidistance projection. The linear distance of an object on Ch'on-Sang-Do from the center is linearly proportional to the north polar angular distance. We have found from a statistical analysis that most stars with declination lower than 50 are at positions representing the epoch of around the first century. On the other hand, stars near the north pole with declination higher than 50 are at the epoch of about 1300, which is close to the time the chart was engraved. This implies that the original Ko-Gu-Rye Dynasty's star chart has been revised by astronomers of Cho-Sun Dynasty. We have also shown that stars on Ch'on-Sang-Do are engraved in such a way that their area is linearly proportional to the visual magnitude.

• 품질경영학회지
• /
• 제43권4호
• /
• pp.471-488
• /
• 2015

Purpose: Double sampling $T^2$ chart is a useful tool for detecting a relatively small shift in process mean when the process is controlled by multiple variables. This paper finds the optimal design of the double sampling $T^2$ chart in both economical and statistical sense under Weibull failure model. Methods: The expected cost function is mathematically derived using recursive equation approach. The optimal designs are found using a genetic algorithm for numerical examples and compared to those of single sampling $T^2$ chart. Sensitivity analysis is performed to see the parameter effects. Results: The proposed design outperforms the optimal design of the single sampling $T^2$ chart in terms of the expected cost per unit time and Type-I error rate for all the numerical examples considered. Conclusion: Double sampling $T^2$ chart can be designed to satisfy both economic and statistical requirements under Weibull failure model and the resulting design is better than the single sampling counterpart.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.1191-1196
• /
• 2009

The T-s chart of air displays graphically the thermophysical properties, so it is very conveniently used in various thermal systems. In previous study, the software analyzing 31 kinds of values in water system and 32 kinds of values in air-conditioning system were developed. In this study, the software drawing 13 kinds of quantity of state on air properties as ideal gas and analyzing 25 kinds of values in any air system was developed. The 13 kinds of quantity of state on air properties are temperature, pressure, specific volume, specific internal energy, specific enthalpy, specific entropy, specific exergy, exergy ratio, density, isobaric specific heat, isochoric specific heat, ratio of specific heat, and velocity of sound, and the 25 kinds of values including 13 kinds are mass flow rate, volume flow rate, internal energy flow rate, enthalpy flow rate, entropy flow rate, exergy flow rate, heat flow rate, power output, power efficiency, reversible work, lost work, and relative humidity. The developed software can draw any range of chart and analysis any state or process on air system. Also, this supports various document-editing functions such as power point. We wish to this chart is a help to design, analysis, and education in air system field.

• 품질경영학회지
• /
• 제12권2호
• /
• pp.15-24
• /
• 1984

Since W.A. Shewhart (1931) developed the quality control method using the control chart, many theoretical and empirical works about such an analytical method have been done. However there are two major methods relating to the control chart analysis; the conventional 3 sigma control method and the warning limit method which has been suggested as a modification of the former. The conventional 3 sigma method requires to take a remedial action only when a quality characteristic is beyond the control limit (3 sigma). However, once a quality characteristic is over the control limit, searching and repairing an assignable cause requires time consuming job and high costs. Therefore if we set the warning limit between the central line and the control limit, we will be able to take remedial measures before too late. In spite of its advantage, much attention has not been paid to use the control chart with warning limit in Korean industries. The main object of this study is to examine improvement of quality and productivity when the control chart with warning limit is used.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.827-832
• /
• 2009

Exergy is the amount of reversible work obtainable when some matter is brought to a state of thermodynamic equilibrium with ambient. This exergy is availability or useful work induced from carnot cycle, and this can calculate the irreversible loss work which occurs within any thermal or power cycle. The exergy ratio is the value of exergy divided by enthalpy of ambient reference, where the quality of energy or enthalpy in substances is evaluated by exergy ratio. Exergy is very important in optimal design method of thermal system or each component, and the value of exergy at given state is calculated by equation. Here, designer can easily understand and find the value of enthalpy because enthalpy is graphically drawn in chart, however exergy did not. In this paper, exergy and exergy ratio of air were drawn on temperature-entropy chart, and we wish to this chart is a help to design, analysis and education.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.1201-1206
• /
• 2008

Psychrometric chart displays graphically the thermophysical properties of moist air, so it is very conveniently used in air-conditioning and refrigeration. On general psychrometric chart, there are dry bulb temperature, web bulb temperature, absolute humidity ratio, relative humidity, specific enthalpy, specific volume, sensible heat factor, and enthalpy-humidity difference ratio. However, various state and process values besides aboves can be plotted on psychrometric chart. In this study, we developed the software drawing twenty kinds of lines, that is vapor pressure, mole fraction ratio of vapor, dew point temperature, degree of saturation, density, specific entropy, specific exergy, contact or bypass factor, uncomfort index, discomposition index, predicted mean vote index, predicted percent dissatisfied, and so on. We wish to this software is a help to design, analysis and education.

• 한국항해항만학회지
• /
• 제29권3호
• /
• pp.269-274
• /
• 2005

현재 국내에서 활발히 이루어지고 있는 GPS 정밀측지측량은 GPS 관측성과가 관측값의 통계적 검증없이 이루어지고 있단 문제점이 있다. 그리고 육지와 해상의 통합지리정보시스템구축을 위한 수치지형도와 수치해도의 통합투영의 필요성이 요구되고 있다. 본 연구를 통하여 GPS 망조정에 사용되는 3점의 기준선에 대한 기하학적인 강도에 따른 정밀도 분석과 분산계수의 변화에 따른 GPS 관측 값들의 정밀도 분석방법으로 GPS 관측값의 정밀도 향상을 위한 방법을 제시하였다. 또한, GPS 관측값의 정밀도를 향상시키는 방법과 수치지도와 전자해도의 통합투영으로 GPS 기준점을 이용한 수지지형도와 수치해도의 경계선 오차량을 비교 검토하여 수치지형도와 수치해도의 통합관리의 방향을 제시하였다. 그리고 이렇게 산출된 GPS 관측결과를 이용하여 EDM 측량결과를 산출하고 수치지형도와 수치해도를 이 정계값들로 맞추었을 때 전체적인 경계점 오차량을 비교 검토하였다.

• 한국건설관리학회:학술대회논문집
• /
• 한국건설관리학회 2003년도 학술대회지
• /
• pp.438-441
• /
• 2003

건설 산업 대부분의 프로젝트에서 공기지연의 발생은 매우 일반적이나 CPM, Bar Chart와 같은 지연분석 기법들로서는 분석하기 매우 어렵다. CPM과 Bar chart를 이용하는 분석기법들은 동시발생과 생산성 손실 지연을 분석하기에 불충분하기 때문이다. 생산성 손실 지연은 동시발생 지연 분석 및 지연 일수 산정에서 중단으로 인한 지연과 다르게 분석되어야 한다. 본 논문에서는 동시발생 공기지연 분석을 포함하여 생산성을 고려한 공기지연 분석방법에 대하여 논하였다.

• Food Science and Biotechnology
• /
• 제18권3호
• /
• pp.745-748
• /
• 2009

Sensory quality variations of jajang sauce were monitored by the $\bar{X}-chart$ and capability analysis based on specifications of each sensory attributes. For sensory quality control (QC) of the sauce which has a strong sweetness and sourness, the ratio of sourness/sweetness was examined as a necessary QC factor to maintain the balance of sweetness and sourness. For the sensory QC factors, all the sensory data were divided into individual sensory score of reference which was a pack of sauce manufactured a week ago. The ratio form of sensory data was useful for decreasing individual variations and for increasing normality of data measured by category scale. The overall proportion of out-spec products under normal manufacturing conditions was obtained by capability analysis of sensory data with normal distribution. Out-spec samples were monitored by the $\bar{X}-chart$ of each sensory attributes.

• 한국정밀공학회지
• /
• 제12권11호
• /
• pp.82-90
• /
• 1995

This paper pressents a condition-based maintenance (CBM) method through bibration analysis. The well known frequency analysis is employed for performing machine fault diagnosis. The statistical control chart is also applied for analyzing the trend of the bearing wear. Vibration sensors are attached to prototype machine and signals are continuously monitored. The sampled data are utilized to evaluate how well the fast fourier transform(FFT) and the statistical control chart techniques could be used to identify defects of machine and to analyze the machine degradation. Experimental results show that the propowed approach could classify every mal-function and could be utilized for real machine diagnosis system.