• 센서학회지
• /
• 제20권4호
• /
• pp.243-248
• /
• 2011

The purpose of this study is to develop a sensing system to measure the capacitance of a pre-developed engine oil deterioration detection sensor integrated with an oil filter. To measure the capacitance of engine oil in the sensor, it is used the way measuring the electric charging time in a capacitor by impressing DC volt. This method has merits on cost and signal stability. The measured capacitance is compensated by comparison with the one measured by an impedance analyzer. Also, using the dielectric constant gained by an impedance analyzer, the calculating equation of the dielectric constant of engine oil related with the currently developed sensor is decided. Finally, the degradation degree of engine oil is estimated according to the change rate of dielectric constant between green oil and used oil. The newly developed personal controller is to control a series of the processes.

• 한국안전학회지
• /
• 제18권3호
• /
• pp.60-63
• /
• 2003

For the increase the charge stability of teflon electrets for used at uncomfortable industrial circumstances with high temperature or humidity, We made an investigation into double layer effect of teflon electrets. Teflon AF film was spincoated on FEP film and then the charge storage property of AF/FEP dual film was investigated to be compared with FEP film. It was found that the AF/FEP dual film has higher surface potential than FEP film on the repeated charging and annealing process. It seems that AF/FEP dual film has higher thermal stability than FEP film through TSC measurement. If the investigations of the double layer effect of Teflon film carried out more closely with it's molecular structures and surface conditions, it may be effectively improved the stability of charge storage.

• 한국안전학회지
• /
• 제12권2호
• /
• pp.65-69
• /
• 1997

Especially, Fiber glass Reinforced Plastics(FRP) is the best composite insulating material which has been so far. Therefore, it's worthy of notice to investigate on the corona electrified composite insulating material by surface condition. And then some other materials will be focussed on. In this study, charge decay were measured with charging-time and grid voltage on FRP composite material surface in order to analyze the mechanism. As a result we have studied that the way of the composite glass fiber(GF) and Polymer and the condition of the contaminated surface was different. In case of the GF is mixed with vertical, charge decay speed is fast because the charge is easily leaked. On the other hand, the surface charge decay speed is depend on conductive or insulated of the contaminant.

• 한국IT서비스학회지
• /
• 제14권4호
• /
• pp.31-44
• /
• 2015

Local governments in Korea are involved in three types of online shopping sites : 'direct operation', 'outsourced operation', and 'sales agency.' They are different in terms of the site operator and the charging mechanism among a local government, the site operator, and local producers. This study analyzes their differences in site traffic, local producers' participation, promotion, and partnership. The results from the investigation of 72 shopping sites are the following. First, shopping sites of the 'direct operation' type and the 'outsourced operation' type show significantly higher participation of local producers. Second, the 'marketing agency' type has significantly higher number of promotional activities than the 'oursourced type' which has significantly higher number than the 'direct operation' type. Third, the number of partnerships in the 'marketing agency' type is the highest. The 'direct operation' type is the second and significantly higher than the 'outsourced type.' On the basis of the analysis results, this paper suggests an incubation ecosystem model as a better way of involvement by local governments in online shopping sites.

• 화약ㆍ발파
• /
• 제31권2호
• /
• pp.32-39
• /
• 2013

일반적으로 장공발파 방법은 과거 대규모 채탄막장이나 댐 기초굴착, 광산 등에서 행하여져 왔으나, 최근 우리나라에서 신설되는 토목터널에서 시공 효율성 및 경제성을 목적으로 많이 실시되고 있다. 고속국도제 600호선 부산외곽 고속도로 ${\bigcirc}$공구 또한 총연장 약 8km의 4차선 대단면 도로 터널로서 Type I, II, 4.4m 장공발파를 실시하는 현장이다. 그러나 당 현장에서는 발파 후 굴진율이 약 75%에 그쳐 발파 후속작업 시간에 영향을 미치게 되고 그로 인하여 전체 작업공정 시간이 증가하여 계획된 굴진을 못하는 현상이 자주 발생되었다. 본 논문에서는 당 현장에서 위 문제를 극복하기 위하여 실시된 장공발파 공법 중 천공경과 가장 밀장전 할 수 있는 ${\phi}36mm$폭약을 적용하여 굴진효율을 향상시키고 작업공정 시간을 단축시킨 사례를 소개하고자 한다.

• 대한교통학회지
• /
• 제27권2호
• /
• pp.145-155
• /
• 2009

본 연구는 구역혼잡통행료(Area pricing)와 진입통행료(Cordon pricing)의 최적 부과경계와 요금수준을 탐색하고 이들 두 방식이 차선정책수단으로서 최선의 정책수단인 이론적 혼잡통행료에 비해 교통혼잡의 완화와 후생상 어떤 차별적 효과가 있는지를 보여준다. 본 연구는 장기적으로 혼잡통행료가 생산 및 소비시장과 토지시장의 균형을 변화시킴에 따라 이들을 고려하기 위해 일반균형조건 아래 단핵도시에서 징수방식들을 비교하고 있다. 연구결과 구역혼잡통행료와 진입통행료의 최적 부과경계는 도시반경이 22km인 경우 도시 중심으로부터 3km 떨어진 구역경계에 동일하게 위치하며 최적 부과경계 아래 최적 요금은 구역혼잡통행료가 진입통행료에 비하여 약간 높은 것으로 분석되었다. 이론적 혼잡통행료에 가장 근접한 사회적 효용 개선효과를 발생시키는 징수방식은 구역혼잡통행료이며 진입통행료가 구역혼잡통행료 보다 낮은 개선효과를 발생시키는 것으로 평가되었다. 교통환경 개선효과 역시 사회적 효용개선효과와 동일하게 통행속도와 일일 평균통행시간에서 구역혼잡통행료가 진입통행료에 비하여 높은 개선효과를 가져오는 것으로 나타났다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제42회 동계 정기 학술대회 초록집
• /
• pp.523-523
• /
• 2012

As the wafer geometric requirements continuously complicated and minutes in tens of nanometers, the expectation of real-time add-on sensors for in-situ plasma process monitoring is rapidly increasing. Various industry applications, utilizing plasma impedance monitor (PIM) and optical emission spectroscopy (OES), on etch end point detection, etch chemistry investigation, health monitoring, fault detection and classification, and advanced process control are good examples. However, process monitoring in semiconductor manufacturing industry requires non-invasiveness. The hypothesis behind the optical monitoring of plasma induced ion current is for the monitoring of plasma induced charging damage in non-invasive optical way. In plasma dielectric via etching, the bombardment of reactive ions on exposed conductor patterns may induce electrical current. Induced electrical charge can further flow down to device level, and accumulated charges in the consecutive plasma processes during back-end metallization can create plasma induced charging damage to shift the threshold voltage of device. As a preliminary research for the hypothesis, we performed two phases experiment to measure the plasma induced current in etch environmental condition. We fabricated electrical test circuits to convert induced current to flickering frequency of LED output, and the flickering frequency was measured by high speed optical plasma monitoring system (OPMS) in 10 kHz. Current-frequency calibration was done in offline by applying stepwise current increase while LED flickering was measured. Once the performance of the test circuits was evaluated, a metal pad for collecting ion bombardment during plasma etch condition was placed inside etch chamber, and the LED output frequency was measured in real-time. It was successful to acquire high speed optical emission data acquisition in 10 kHz. Offline measurement with the test circuitry was satisfactory, and we are continuously investigating the potential of real-time in-situ plasma induce current measurement via OPMS.

• Journal of Electrochemical Science and Technology
• /
• 제12권4호
• /
• pp.458-464
• /
• 2021

Lithium ion batteries (LIBs) is a kind of rechargeable secondary battery, developed from lithium battery, lithium ions move between the positive and negative electrodes to realize the charging and discharging of external circuits. Zeolitic imidazolate frameworks (ZIFs) are porous crystalline materials in which organic imidazole esters are cross-linked to transition metals to form a framework structure. In this article, ZIF-67 is used as a sacrificial template to prepare nano porous carbon (NPC) coated cobalt nanoparticles. The final product Co/NPC composites with complete structure, regular morphology and uniform size were obtained by this method. The conductive network of cobalt and nitrogen doped carbon can shorten the lithium ion transport path and present high conductivity. In addition, amorphous carbon has more pores that can be fully in contact with the electrolyte during charging and discharging. At the same time, it also reduces the volume expansion during the cycle and slows down the rate of capacity attenuation caused by structure collapse. Co/NPC composites first discharge specific capacity up to 3115 mA h/g, under the current density of 200 mA/g, circular 200 reversible capacity as high as 751.1 mA h/g, and the excellent rate and resistance performance. The experimental results show that the Co/NPC composite material improves the electrical conductivity and electrochemical properties of the electrode. The cobalt based ZIF-67 as the precursor has opened the way for the design of highly performance electrodes for energy storage and electrochemical catalysis.

• 화약ㆍ발파
• /
• 제30권2호
• /
• pp.21-28
• /
• 2012

사면 절취 및 도심지 터파기 등 인공적으로 사면을 형성하는 경우 경제적이고 효율적인 공법으로 화약을 이용한 발파공법이 많이 사용되고 있다. 절취면 보호를 위해 대상 암반에 손상을 주지 않고 암반이 가지고 있는 자연적인 강도를 그대로 유지할 수 있도록 발파하는 것이 중요하며 사회적으로 문제 시 되는 발파공해를 고려하여 발파진동을 저감할 수 있는 공법이 필요하다. 본 연구에서는 평활한 절취면 형성을 위하여 도폭선에 폭약을 등간격으로 배치하고 장약의 방법과 전색의 방법을 달리하여 발파를 진행하였다. 4가지 패턴을 사용하여 총 60공에서 20회 발파를 실시하였으며 발파원으로부터 15~120m 거리에서 발파진동소음측정기를 사용하여 진동속도를 측정하여 310개의 데이터를 획득하였다. 측정된 진동속도 데이터를 분석하여 발파진동을 저감하고 효율적이고 경제적으로 절취면을 보호할 수 있는 방법을 연구해 보았다.

• 한국지능시스템학회논문지
• /
• 제24권2호
• /
• pp.141-146
• /
• 2014

본 논문은 Peak Shaving 알고리즘의 성능 향상을 위한 예측 부하 곡선의 생성의 한 방법을 제시한다. 여기서 논하는 Peak Shaving 알고리즘은 대용량의 배터리 에너지 저장시스템 (BESS, Battery Energy Storage System)을 위한 PMS (Power Management System)의 장주기 스케쥴링 알고리즘을 의미한다. 위의 PMS는 주로 배터리에서 에너지의 입출력을 제어하는 데에 주목적이 있다. 이를 위해서 Peak Shaving 알고리즘이 사용되는데, 여기서 예측 부하곡선과 실제 부하곡선 사이의 불확실성이 나타난다. 원활한 에너지의 충,방전을 위하여 본 논문에서는 주 단위의 표준화 방법과 계절별 부하의 특성을 고려한 예측 부하 곡선 생성 방법을 제안한다.