• 대한기계학회논문집B
• /
• 제33권9호
• /
• pp.722-727
• /
• 2009

The effect of the intake flow on the spray structure of a high pressure 11-hole fuel injector were examined in a single cylinder optical direct injection spark ignition (DISI) engine. The effects of injection timing and in-cylinder charge motion were investigated using the 2-dimensional Mie scattering technique. It was confirmed that in the homogeneous charge mode, the in-cylinder swirl charge motion played a major role in the fuel spray distribution during the induction stroke rather than the tumble flow. But, in the stratified charge mode, the effect of the in-cylinder charge was not so large that the injected spray pattern was nearly maintained and the increase of in-cylinder pressure by the upward moving piston reduced the fuel spray penetration.

• 한국군사과학기술학회지
• /
• 제12권3호
• /
• pp.378-387
• /
• 2009

The shaped charge consists of the cast or pressed explosive and the metal liner. The pressure formed in detonation wave is so high that the liner is collapsed and the jet of high temperature, pressure and velocity is produced. The jet penetrates the target. In this paper, the simulation for optimization of flexible linear shaped charge(FLSC) was carried out by AUTODYNE program. Based on the results of simulation, we made a prototype of FLSC and evaluated penetration performance, flexibility and its application. The test result of prototype was compared with that of simulation.

• 한국농공학회지
• /
• 제41권6호
• /
• pp.82-89
• /
• 1999

This paper present the strength estimation of precast concrete products by chloride ion penetration method. The relation between the strength of precast concrete product and the ion passing charge is linear and a numerical model of FCK =515.96-0.201Q is prposed. The results showe good agreement at about 9.0% error ration with the estimated model results for real precast concrete product.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.75-79
• /
• 2013

PURPOSES : The objective of this study is to evaluate the environmental resistance of bio-polymer concrete for use of pavement materials developed for reducing the carbon-dioxide. METHODS : The compression, tension, and bending strength tests were conducted on the bio-polymer concrete specimens with and without environmental conditioning. The specimens were conditioned using the freezing-thaw and accelerated weathering process for long period of time. To assess the resistance against chloride, the chloride ion penetration resistance tests were carried out on the bio-polymer concrete specimens. RESULTS : Test results show that the maximum difference in strength between specimens with and without conditioning is about 2.6MPa indicating that the effect of environmental conditioning on specimen strength is negligible. Based on the chloride ion penetration resistance test, the penetration quantity of electric charge of the specimens is zero and there is no ion penetration within the bio-polymer concrete. CONCLUSIONS : It is found from this study that there is slight change in strength of bio-polymer concretes before and after environmental conditioning process and no chloride ion penetration observed in these specimens. Therefore, the developed bio-polymer concretes can be applied effectively as pavement materials due to the small change of physical properties with environment change.

• Journal of Microbiology and Biotechnology
• /
• 제32권9호
• /
• pp.1209-1216
• /
• 2022

To better understand the effects of PEGylation and biotinylation on the delivery efficiency of proteins, the cationic protein lysozyme (LZ) and anionic protein bovine serum albumin (BSA) were chemically conjugated with poly(ethylene glycol) (PEG) and biotin-PEG to primary amine groups of proteins using N-hydroxysuccinimide reactions. Four types of protein conjugates were successfully prepared: PEGylated LZ (PEG-LZ), PEGylated BSA (PEG-BSA), biotin-PEG-conjugated LZ (Bio-PEG-LZ), and biotin-PEG-conjugated BSA (Bio-PEG-BSA). PEG-LZ and Bio-PEG-LZ exhibited a lower intracellular uptake than that of LZ in A549 human lung cancer cells (in a two-dimensional culture). However, Bio-PEG-BSA showed significantly improved intracellular delivery as compared to that of PEG-BSA and BSA, probably because of favorable interactions with cells via biotin receptors. For A549/fibroblast coculture spheroids, PEG-LZ and PEG-BSA exhibited significantly decreased tissue penetration as compared with that of unmodified proteins. However, Bio-PEG-BSA showed tissue penetration comparable to that of unmodified BSA. In addition, citraconlyated LZ (Cit-LZ) showed reduced spheroid penetration as compared to that of LZ, probably owing to a decrease in protein charge. Taken together, chemical conjugation of targeting ligands-PEG to anionic proteins could be a promising strategy to improve intracellular delivery and in vivo activity, whereas modifications of cationic proteins should be more delicately designed.

• 화약ㆍ발파
• /
• 제36권1호
• /
• pp.1-11
• /
• 2018

본 연구에서는 수중성형폭약 장치의 성능을 평가하기 위하여 수치해석 및 강재관입 실험을 하였다. 수중성형폭약 장치설계를 위한 인자는 챔버종류, stand-off, 와이어 장착의 각 3수준으로 강건설계를 적용하여 인자별 기여도 분석을 하였다. 관입성능에 대한 기여도 분석결과 스탠드오프에 의한 영향이 가장 컸고 챔버 종류, 와이어 장착 순으로 나타났다. 최종적으로 25m 이상 수심에서 수중성형폭약 장치 적용에 따른 강관 관입 검증실험 및 수치해석을 하였고, 그 결과로서 실험 및 수치해석 모두 유사한 결과를 보였다. 본 연구를 통해 고심도 수중에서의 강재 절단을 위한 수중성형폭약 장치의 실현성을 확인하였다.

• 화약ㆍ발파
• /
• 제36권2호
• /
• pp.10-18
• /
• 2018

철골 구조물의 발파해체에 사용하는 성형폭약은 국내외 대부분의 경우에 사용이 제한적이거나 수급이 불가능하여 적용하지 못하는 경우가 많이 발생한다. 이러한 문제를 해결하기 위해서는 산업용 폭약을 사용하여 금속 제트가 발생할 수 있는 장치가 필요하다. 본 연구에서는 금속 제트가 발생하는 강재 절단용 장약용기를 제작하였다. 절단 성능 실험을 통해 두께 25mm의 강판에 대한 장약용기의 절단 성능을 평가하였다. 또한 침투 과정 수치 모사와 절단 성능 실험에서의 결과를 비교하고, 두께 35mm와 70mm의 강판에 대한 절단 성능을 평가하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.859-864
• /
• 2015

This paper analyzes the impact of Plug-in Electric vehicles(PEVs) on power demand and voltage change when PEVs are connected to the domestic distribution system. Specifically, it assesses PEVs charging load by charging method in accordance with PEVs penetration scenarios, its percentage of total load, and voltage range under load conditions. Concretely, we develop EMTDC modelling to perform a voltage distribution analysis when the PEVs charging system by their charging scenario was connected to the distribution system under the load condition. Furthermore we present evaluation algorithm to determine whether it is possible to adjust it such that it is in the allowed range by applying ULTC when the voltage change rate by PEVs charging scenario exceed its allowed range. Also, detailed analysis of the impact of PEVs on power distribution system was carried out by calculating existing electric power load and additional PEVs charge load by each scenario on new-town in Korea to estimate total load increases, and also by interpreting the subsequent voltage range for system circuits and demonstrating conditions for countermeasures. It was concluded that total loads including PEVs charging load on new-town distribution system in Korea by PEVs penetration scenario increase significantly, and the voltage range when considering ULTC, is allowable in terms of voltage tolerance range up to a PEVs penetration of 20% by scenario. Finally, we propose the charging capacity of PEVs that can delay the reinforcement of power distribution system while satisfying the permitted voltage change rate conditions when PEVs charging load is connected to the power distribution system by their charging penetration scenario.

• 동력기계공학회지
• /
• 제18권6호
• /
• pp.186-192
• /
• 2014

The spray structures under the stratified and homogeneous charge condition of a gasoline direct injection were investigated in a visualized constant volume chamber. The chamber pressure was controlled from 0.1 MPa to 0.9 MPa by the high pressure nitrogen and the chamber temperatures of $25^{\circ}C$, $60^{\circ}C$ and $80^{\circ}C$ were controlled by the band type heater. The fuel, iso-octane was injected by a 6-hole injector with the pressures of 7 MPa and 12 MPa. From the experiments results, it is confirmed that at lower chamber pressure, the penetration length and spray angle are mainly affected by the chamber temperature with the vaporization of the fuel droplets and generated vortices at the end region of the spray. And at higher chamber pressure, the penetration lengths at the end of the injection were about 50~60% of that at lower chamber pressure regardless of the chamber temperature and the effect of fuel injection pressure is larger than that of the chamber temperature which results from larger penetration lengths at higher fuel injection pressure than at lower fuel injection pressure regardless of the chamber temperatures.

• 콘크리트학회논문집
• /
• 제16권4호
• /
• pp.485-492
• /
• 2004

본 논문에서는 콘크리트의 염소이온에 대한 저항성을 평가하기 위한 대표적인 전기적 촉진시험인 ASTM C 1202 방법을 혼화재를 사용한 콘크리트에 적용하면 콘크리트내의 $OH^-$ 농도의 저하에 따른 영향으로 통과전하량을 낮게 평가할 수 있다는 문제점을 지적하고 이에 해결방안으로 증류수를 사용하는 보정방법을 검토하였다. 실험결과 보정방법 사용시 $OH^-$ 이온과 온도상승에 의한 영향을 배제시킬 수 있었고 NaCl 용액에 장기침지실험을 통해 구한 염화물 확산계수와의 비교시 ASTM C 1202 방법보다 상관성이 높게 나타나 혼화재를 사용한 콘크리트의 염소이온 침투저항성을 보다 정확하게 평가할 수 있는 방법이라 사료된다.