• 펄프종이기술
• /
• 제32권1호
• /
• pp.26-32
• /
• 2000

The impact of major surface chemical properties of silica sols on the retention and drainage performance of the silica based micrparticle system, Compozil was investigated using four different silica sols. And the effect of silica properties on the interactions with cationic starch and cationic plyacrylamide has also been identified. The surface charge density and the stability over pH of silica sols were increased by introducing aluminosilicate anions at surface. It was found that the charge density of silica sols determined the addition level necessary to attain the maximum retention and drainage. When silica sols were combined with cationic starch, the change density of the product was the critical properties and the degree of microagregation was of minor importance. In the cationic polyacrylamide system the degree of colloid structure appeared to be a more critcial property than the charge density of silica sols.

• Journal of Magnetics
• /
• 제10권4호
• /
• pp.149-151
• /
• 2005

The electric properties of a single crystal bismuth telluride doped with a small concentration of Erbium, $Bi_{z-x}Er_xTe_3$ with x = 0.002, are investigated as a function of temperature. The resistivity was obtained by using the van der Pauw method. The measured electrical resistivity is 78 ${\mu}{\Omega}cm$ at 4.2 K. The charge density of $Bi_{z-x}Er_xTe_3$ is found to be $2{\times}10^{19}/cm^3$ at 4.2 K. It turns out that $Bi_{z-x}Er_xTe_3$ is a p-type semiconductor. It is discussed that the high mobility and less density support that $Bi_{z-x}Er_xTe_3$ is a potential sensor with high energy resolution. Comparison with an established material (i.e. Au:Er alloy) is also discussed.

• Journal of Electrical Engineering and Technology
• /
• 제12권1호
• /
• pp.302-309
• /
• 2017

The ageing of XLPE cable insulation will lead to the accelerating accumulation of space charge, which will greatly affect the safe operation of the HVDC cable. In order to investigate the influence of different ageing modes on the space charge distribution of the HVDC cable, thermal stressed, electrical stressed and electro-thermal stressed endurance tests were carried out on the XLPE peelings. The tested XLPE peelings were obtained from 160kV HVDC cable insulation. The endurance tests were carried at thermal stress of 363K, electrical stress of 20kV/mm DC and a combination of both. The Pulsed Electro-Acoustic (PEA) method was used to measure the space charge distribution of the samples. The influences of ageing on the trap energy distribution were analyzed based on the isothermal relaxation theory and the decay characteristics of the space charge. The results showed that thermal ageing would help to improve the crystalline morphologies of the XLPE at the early stage. The total amount of space charge decreased compared to the ones before thermal ageing. The long term of electrical stress would result in the cleavage of polymer molecule chains which would intensify the accumulation of space charge and increase the density and depth of electron traps. With a combination of electrical and thermal stress, the injection and migration of space charge were more significant. Besides, the depth and density of electron traps increased rapidly with the increase of endurance time.

• 대한토목학회논문집
• /
• 제26권1D호
• /
• pp.49-58
• /
• 2006

본 연구는 도시개발밀도와 교통시설용량 간의 영향관계를 실증적으로 분석하여, 교통성과(transportation performance)를 극대화하기 위한 토지이용방안을 모색하는 것이다. 이를 위해 서울시 도심을 사례분석지역으로 선정하여 다양한 개발밀도 시나리오에 따라 교통용량의 한계를 감안한 개발용량을 산정하였다. 개발밀도 변화에 따른 교통영향분석을 위한 분석모형으로 SECOMM모형이 제시되었고, 이를 활용하여 20개의 다양한 개발밀도 대안의 영향을 분석하였다. 분석 결과, 도심고밀개발시교통 관점에서 볼 때 분석상 교통적으로 가장 지속가능성이 높은 수준은 도심혼잡통행료를 징수하고 용적률을 460% 까지 개발했을 때인 것으로 나타났다. 한편 도심용적률이 460%를 상회해도 서울시 전체적인 교통상황이 지속적으로 개선되는 것으로 분석되어, 통행료 수준을 높임으로써 지속가능한 교통여건을 달성하는 것이 보다 바람직할 것으로 판단된다. 한편, 도심에서 혼잡통행료를 부과하지 않는다면 도심에서 최대 용적률 430%까지 밖에 고밀화를 진행할 수 없고 이때 서울시 전체적으로 개선폭도 그리 크지 않은 것으로 분석되었다. 따라서 도심고밀화를 위해서는 교통수요관리시책(TDM)과 병행하는 것이 필수적일 것으로 사료된다.

• Food Science and Biotechnology
• /
• 제15권2호
• /
• pp.163-167
• /
• 2006

Pectin was enzymatically extracted from industrial lemon pomace by using an endo-polygalacturonase from Aspergillus niger as a processing aid and compared to pectin extraction by hot hydrochloric acid. The yield of pectin was 17.6 and 20.2% with enzymatic and acidic treatments, respectively. The molecular weight distribution did not vary greatly between the samples extracted with enzyme or acid. Large differences in charge density were observed, however, when the samples were analyzed by anionic-exchange chromatography. Pectin extracted by the enzymatic treatment indicated higher charge density than that obtained by hydrochloric acid. The higher charge density could due to the presence of endogenous lemon pectinesterase, which was activated at low pH 4.5 in situ conditions during the process of enzymatic extraction, leading to low methoxylated pectin with a higher charge density.

• 한국환경과학회지
• /
• 제11권2호
• /
• pp.93-102
• /
• 2002

Using a simple continuous optical technique, coupled with measurements of zeta potential, the flocculation characteristics of kaoline suspensions of different content(15, 35 and 55 NTU) by several cationic polyelectrolytes, has been examined. The optimum mixing is obtained under a constant stirring of 200 rpm, differently from a general flocculation test. The charge density of a polyelectrolyte is important in determining the optimum dosage and in the removal of kaoline particles. The optimum dosage is less for the polyelectrolyte of higher charge density and is the same regardless of kaoline content. At the dosage, the removal of kaoline particles is higher for the polyelectrolyte of higher charge density and zeta potential of kaoline particles reaches to near zero. The rate of adsorption and flocculation rate have been found to be affected by charge density and molecular weight of a polyelelctrolyte and the content of kaoline particles.

• Journal of Electrical Engineering and Technology
• /
• 제10권3호
• /
• pp.1102-1106
• /
• 2015

A hybrid supercapacitor (HS) is an energy storage device used to enhance the low weight energy density (Wh/kg) of a supercapacitor. On the other hand, a sudden decrease in capacity has been pointed out as a reliability problem after many charge/discharge cycles. The reliability problem of a HS affects the early aging process. In this study, the capacity performance of a HS was observed after charge/discharge. For detailed analysis of the initial charge/discharge cycles, the charge and discharge curve was measured at a low current density. In addition, a solid electrolyte interphase (SEI) layer was confirmed after the charge/discharge. A HC composed of a lithium titanate (LTO) anode and active carbon cathode was used. The charge/discharge efficiency of the first cycle was lower than the late cycles and the charge/discharge rate was also lower. This behavior was induced by SEI layer formation, which consumed Li ions in the LTO lattice. The formation of a SEI layer after the charge/discharge cycles was confirmed using a range of analysis techniques.

• 대한의용생체공학회:의공학회지
• /
• 제18권3호
• /
• pp.307-313
• /
• 1997

비정질 실리콘에서의 photoconductive gain mechanism을 방사선 계측시 이용하기 위한 연구를 수행하였다. p-i-n, n-i-n, n-i-p-i-n과 같은 여러 형태의 비정질 실리콘 계측기를 제작하고 시험하였다. Photoconductive gain은 두 가지의 시간적 범위에서 측정하였다. : 하나는 고에너지의 하전입자나 감마선의 통과를 모사하기 위해서 $1{\mu }$ sec 보다 짧은 가시광선 펄스를 사용하였고, 다른 하나는 의학영상에 사용되는 x-선을 모사하기 위하여 보다 긴 1msec 정도의 가시광선 펄스를 사용하였다. 두 가지의 photoconductive gain-current gain과 charge gain-을 정의하여 실험하였으며, charge gain은 current gain을 시간에 따라 적분한 값이다. 10 mA/$cm^2$의 dark current density level에서, 짧은 펄스에 대해서는 3~9정도의 charge gain을 얻을 수 있었고 긴 펄스에 대해서는 수백의 charge gain을 얻을 수 있었다. 여러 가지의 gain에 대한 결과를 계측기의 구조, 부가전압, dark current density와의 관계를 통하여 논의하였다.

• 한국세라믹학회지
• /
• 제32권11호
• /
• pp.1276-1282
• /
• 1995

• ETRI Journal
• /
• 제27권3호
• /
• pp.319-325
• /
• 2005

In this paper the effect of temperature on the electrical properties of organic semiconductor disperse orange dye 25 (OD) have been examined. Thin films of OD have been deposited on $In_{2}O_{3}$ substrates using a centrifugal machine. DC current-voltage (I-V) characteristics of the fabricated devices $(Al/OD/In_{2}O_{3)$ have been evaluated at varying temperatures ranging from 40 to $60^{\circ}C$. A rectification behavior in these devices has been observed such that the rectifying ratio increases as a function of temperature. I-V characteristics observed in $Al/OD/In_{2}O_{3)$ devices have been classified as low temperature $({\leq} 50^{\circ}C)$ and high temperature characteristics (approximately $60^{\circ}C$). Low temperature characteristics have been explained on the basis of the charge transport mechanism associated with free carriers available in OD, whereas high temperature characteristics have been explained on the basis of the trapped space-charge-limited current. Different electrical parameters such as traps factor, free carrier density, trapped carrier density, trap density of states, and effective mobility have been determined from the observed temperature dependent I-V characteristics. It has been shown that the traps factor, effective mobility, and free carrier density increase with increasing values of temperature, whilst no significant change has been observed in the trap density of states.