• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.273-273
• /
• 2008

This paper describes the frequency response of two-port surface acoustic wave (SAW) resonator made of 002-polycrystalline aluminum nitride (AlN) thin film on 111-poly 3C-SiC buffer layer. In there, Polycrystalline AlN thin films were deposited on polycrystalline 3C-SiC buffer layer by pulsed reactive magnetron sputtering system, the polycrystalline 3C-SiC was grown on $SiO_2$/Si sample by CVD. The obtained results such as the temperature coefficient of frequency (TCF) of the device is about from 15.9 to 18.5 ppm/$^{\circ}C$, the change in resonance frequency is approximately linear (30-$150^{\circ}C$), which resonance frequency of AlN/3C-SiC structure has high temperature stability. The characteristics of AlN thin films grown on 3C-SiC buffer layer are also evaluated by using the XRD, and AFM images.

• 한국전기전자재료학회논문지
• /
• 제19권9호
• /
• pp.862-867
• /
• 2006

Bi-based nano-varistors and micro-varistors fabricated with each ZnO nano-powder and micro-powder were studied about characteristics on the surge capability in this study. ZnO nano-varistors were sintered in air at $1050^{\circ}C$ for 2 hr. The voltage-current and residual voltage properties of ZnO nano-varistor were compared with their of ZnO micrio-varistor. As a result of these properties, our ZnO nano-varistor has about 3 times at operating voltage as compared with conventional ZnO varistor fabricated with micro-powder and the residual voltage was 8.06 kV at nominal discharge current 101kA in the lighting impulse current test. And then the residual voltage rate 1.72 of our nano-varistor has had better performance than the 1.79 of micro-varistor because ZnO nano-varistor has shown much quick response property because of increasing effective cross-section area. Also, to analysis surge capability took thermal images for pyrexia temperature distribution with each of the varistors after operating varistors. Nano-varistor doesn't have shown local overheating and can confirm accurate temperature grade on the surface of its.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 디스플레이 광소자분야
• /
• pp.177-180
• /
• 2003

We investigated transmittance, surface characteristics, and resistivity according to bending of ITO(indium tin oxide) film with four other multi-barrier film. Transmission data of ITO film with four ITO films showed there was about large 90% transmission above 550nm wavelength at three multi-barrier structures. But, both-side hard coated structure showed relatively low 75% transmission above 550nm wavelength. And, surface images measured from SEM(scanning electron microscope) showed both-side hard coated structure have a tendency of more roughness. Also, resistivity change of four other multi-barrier film showed there was the lowest change at one-side hardcoated structure. Subsequently, with result of resistivity change according to position, we knew the resistivity change of the center increased rapidly than that of the edge.

• 한국환경과학회지
• /
• 제29권12호
• /
• pp.1261-1274
• /
• 2020

The characteristics of ammonia-nitrogen (NH4+-N) adsorption by a zeolitic material synthesized from Jeju scoria using the fusion and hydrothermal method was studied. The synthetic zeolitic material (Z-SA) was identified as a Na-A zeolite by X-ray diffraction, X-ray fluorescence analysis and scanning electron microscopy images. The adsorption of NH4+-N using Jeju scoria and different types of zeolite such as the Z-SA, natural zeolite, and commercial pure zeolite (Na-A zeolite, Z-CS) was compared. The equilibrium of NH4+-N adsorption was reached within 30 min for Z-SA and Z-CS, and after 60 min for Jeju scoria and natural zeolite. The adsorption capacity of NH4+-N increased with approaching to neutral when pH was in the range of 3-7, but decreased above 7. The removal efficiency of NH4+-N increased with increasing Z-SA dosage, however, its adsorption capacity decreased. For initial NH4+-N concentrations of 10-200 mg/L at pH 7, the adsorption rate of NH4+-N was well described by the pseudo second-order kinetic model than the pseudo first-order kinetic model. The adsorption isotherm was well fitted by the Langmuir model. The maximum uptake of NH4+-N obtained from the Langmuir model decreased in the order of Z-CS (46.8 mg/g) > Z-SA (31.3 mg/g) > natural zeolite (5.6 mg/g) > Jeju scoria (0.2 mg/g).

• 복식문화연구
• /
• 제30권3호
• /
• pp.455-476
• /
• 2022

The aim of this study was to develop Jiangxi Nuo masks using 3D digital fashion design technology and suggest various ways to utilize traditional culture based on the characteristics of Nuo masks, a traditional Chinese artifact of intangible cultural significance. The researchers conducted a literature review to gather information about Nuo culture and masks that could represent Jiangxi. Features of the masks were analyzed and classified. The result are as follows. First, the symbolic characteristics of Jiangxi's Nuo masks can be divided into those based on their origin and history, the user's social status, and the notions of primitive beliefs of the chosen people, such as naturism and totemism. Second, Nuo masks' splendid decorations convey meanings such as luck, the bixie, longevity, wealth, and peace in the family. Third, playfulness in mask-making is about dismantling the original form of the mask, re-creating it through application. Fourth, the masks express primitiveness mostly by conserving the wood's original color or material. The initial masks carved to represent images of figures aptly deliver the primitive forms and images of Nuo culture. In this study, Nuo masks were developed and produced using the 3D digital technology CLO 3D by adopting the expressive characteristics and applying design methods such as asymmetricity, exaggeration, and modification. The results of this study demonstrate the possibility of creating diverse as well as economical designs through the reduction of production.

• 한국실내디자인학회논문집
• /
• 제23권5호
• /
• pp.25-32
• /
• 2014

The purpose of this study is to analyze the expression method and visual characteristics of material utilized the lighting in terms of a visual aspect. The method of study is to establish standards for analysis and to classify type of visual effect and expression of that focused on preliminary study. And It is to grasp the visual expression characteristics of new materials. through analysis standards. The results of the study are as follows. First, 'decorativeness', 'symbolization', 'motion-images' and 'interactivity' were selected as the type of visual expression through the precedent studies. And it was classified the visual effects as 3 types like 'a light-emitting effect', 'steric effects' and 'movement effect'. Second, We could know that 'light-emitting effect' was expressed in 7-new materials, 'three-dimensional effect' was expressed in 3-new materials, and 'motion effect' in 4-new materials. Through that. We could know that the new materials represented with 'light-emitting effect' are much more than the other new materials. Third, the results of this study show that 'decorativeness' in the visual types was appeared to 'light-emitting effect' and 'three-dimensional effect'. 'symbolization' to 'light-emitting effect' and 'motion effect', 'motion-images' to 'three-dimensional effect' and 'motion effect' and 'interactivity' to 'light-emitting effect', 'three-dimensional effect' and 'motion effect'. And It was appeared to three effects in 'interactivity'. We could know that it is more effective to be presented the visual effect simultaneously to communication with the visual perception.

• 한국의상디자인학회지
• /
• 제17권3호
• /
• pp.85-98
• /
• 2015

Modern fashion shows the trend of various styles and the period focusing on only product functions is changed to the period focusing on consumer's sensibility. Consumers show different sensitivities and preference by individual at the stage cognizing and recognizing the stimulation of given image and the method of objective measurement based on the fashion sensible vocabularies is necessary to measure fashion sensibility. Therefore, this research is significant to examine differences of preference to classic fashion by generation and awareness for sensible vocabularies and suggest methodology of design sensible evaluation research through the quantitative evaluation objectifying subjective sensibility. For the method of research, precedent theses related to classic, concept and characteristics of classic in books and definition and characteristics by generation were examined, the best 3 domestic portal sites were selected and adjective vocabularies and images related to classic were collected from 2010 to 2014. Among the 206 adjectives collected, vocabularies whose average is more than 3.5 were drawn by 5-point Likert scale for fashion expert group. And, among the total 306 images collected, 21 representative images were selected by preliminary investigation of fashion expert group. For the classic images and vocabularies selected, frequency analysis, factor analysis and variance analysis were conducted by SPSS 19.0. The results of analysis are as follows. Preference to classic fashion image by generation was analyzed. As a result, both of two generations selected classic fashion as the most classic one. The images of the next orders were analyzed. As a result, Y generation selected basic classic fashion image which is casual with high activity as a classic one. Baby boom generation selected ancient classic fashion image, so there were differences in preference for classic by generation. As a factor analysis on classic adjective vocabularies, they could be divided into 5 factors such as basic form, attractive form, traditional form, vintage form and active form and they verified that credibility of all measuring variables for classic sensible vocabularies was achieved. Differences of classic sensible vocabularies by classic fashion image and generation were examined. As a result, generation and classic fashion image made a significant effect on five factors. Therefore, there were differences of the awareness on classic fashion images and sensible vocabularies among the generations and this thesis can be a fundamental material which objectifies subjective sensibility and suggests the methodology of new research.

• 한국농촌건축학회논문집
• /
• 제11권1호
• /
• pp.37-45
• /
• 2009

This study aims for proposing improvement method for streetscape in a small and medium city of Korea. According to this purpose, in chapter 2, by inspecting conservation of street environment and streetscape, deduce the frame for analyzing streetscape in commercial district. In chapter 3, analyzing present condition and problems of selected streets in Pohang City, derive the primary factors to induce desirable streetscape through problems and their reason between the analyzed elements of building form. Analyzed elements are composed of floor elements, wall elements, ceiling elements. The detailed elements are pavement of road, street furniture, height of buildings, color and material of building and outdoor advertisements. In chapter 4, by conducting a questionnaire survey of pedestrians about street images -choosing impressive physical elements and the feeling of the street by the list of adjective of semantic differential scale- and the preference, propose the direction of improvement about streetscape in commercial district.

• 한국실내디자인학회논문집
• /
• 제27권2호
• /
• pp.3-11
• /
• 2018

This study aims to investigate whether there is intensionally changing eye - gaze on the cafe space images with floor finishing materials. In the Yarbus' experiment, he argued that changing information that an observer is asked to obtain from an image changes pattern of eye movements. Based on the scan path evidence, this research have questions as (1) the difference of visual attention on finishing floor material stimulus, (2) visual attention of initial activity time and type of movement paths on AOIs, and (3) visual relation floor area with another AOIs. Eye movements were recorded with the SMI REDn Scientific, which sampled eye position at 30Hz and lasted 2 minutes(120s). Although viewing was binocular, only the right eye was tracked. Of the 66 observers(mean age 22 years, standard deviation: ${\pm}1.82$) who participated in the experiment done by the four point calibration and validation procedures at the beginning tasks. Analyzing qualitative data from the number of fixation and duration on AOIs divided into four parts (AOI I-Floor, AOI II-Wall, AOI III-Ceiling, and AOI IV-Counter) in the stimulus. The results from this experiment analyzed as follows. First, it was significant in the difference of the average number of AOIs fixation times observed for the spatial image using the wood tile flooring material and the polishing tile. The wood tile flooring of stimulus had higher fixation number on AOI-II, AOI-III, and AOI-IV than the polishing tile. On seeing AOI-I was higher attention in the polishing tile stimulus. Second, the observers examined AOI-II intensively in both stimuli. However, the visual intensity was also followed by on the AOI-IV and AOI-I in the wood tile flooring stimulus, and on AOI-I, AO-IV in the polishing tile. Third, visual attention data on each AOIs have divided into the time range of "5 sec" for both images. In the wood tile stimulus, the horizontal movement path followed by AOI-II, AOI-IV, and AOI-II. In the polished tile stimulus, the movement path followed by moving vertically to AOI-II, AOI-I, and AOI-II. This study approached meaningfully and found out the characteristics of visual attention, according to the different intentions of visual attention, the relationship pathways of visual mechanism appeared and also activated by eye-tracking experiments.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1733-1736
• /
• 2008

ZnO thin films with preferred orientation along the (0 0 2) plane were fabricated by a sol-gel method. The effects of the annealing temperature, time, and thickness were studied by investigating UV-visible spectra, FT-IR spectra, and XRD of ZnO films. The films were dried and annealed ed at $100^{\circ}C,\;200^{\circ}C$, and $300^{\circ}C$ for 1hr, 2hrs, and 3hrs, respectively. The film showed the preferred (0 0 2) orientation and high transmittance near 90% in the visible range. Also, SEM images of the films exhibited very smooth surfaces without holes and cracks. Schottky diodes were fabricated by using ZnO sol-gel material. Au and Al were used as electrodes to make Ohmic and Schottky contacts, respectively. The annealing temperature, time and the thickness dependent I-V characteristics were presented in this article.